GPTIMER12 IRQ is at IRQ 95 on OMAP3, unlike OMAP2.  (ref: OMAP34xx
Multimedia High Security (HS) Device Silicon Revision 3.0 Security
Addendum Rev. B, SWPU119B)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add fields wr_access and wr_data_mux_bus.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Update OneNAND support for OMAP3.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Fixes required to make HSMMC driver work as module.Complete the
previously applied patch.

This patch provides the necessary fixes to make the HSMMC driver work as
loadble module.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Romit Dasgupta <romit@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Update omap2evm defconfig

- Enable hsmmc support.
Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch enables high speed MMC support for OMAP2EVM board
Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch is to fix I2C transmit overflow error.
Signed-off-by: Chandra Shekhar <x0044955@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Looks like recent patches broke compile.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Update BeagleBoard defconfig:

- Use MPU timer instead of 32k timer to work around serial hang issue
- Disable CONFIG_DEBUG_LL
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Syed Mohammed Khasim <khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Mark many functions in twl4030-core.c as __init.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap2evm LCD supports VGA and QVGA resolution, by default its in VGA mode.
Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch: omap: get rid of usb_init() protytpes

we now use usb_musb_init() and usb_ehci_init() functions
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: HSMMC fix for hotplug scenario.

This patch fixes the inconsistancy noted if the card is removed from the slot
duing an active I/O.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Romit Dasgupta <romit@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: HSMMC fix for core ret.

The core ret seem to be prevented by HSMMC CTO errors. This patch provides a
fix for the same.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch provides dynamic allocation for mcbsp device.
no. of  mcbsp for each cpu is determined at runtime and accordingly memory is
allocated. id check macro definition has been changed.

Signed-off-by:  chandra shekhar x0044955@ti.com
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch calls the functionality supported by the TWL4030 battery charger
interface driver
to enable/disable battery charging upon cable attach/detach.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Triton Battery Charger Interface

This patch provides a OMAP Triton battery charger interface driver to moniter
the battery
through power class subsystem.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Device setup/board level initialization for the Triton battery charger
interface driver for the OMAP3430 SDP.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Free HDQ clocks when a read is tried with no battery connected

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

struct clk contains a struct clockdomain *clkdm and const char
*clkdm_name.  The clkdm_name is only used at initialization to look up
the appropriate clkdm pointer.  Combining these into a union saves
about 850 bytes on 3430SDP.  This patch should not cause any change in
kernel function.

Boot-tested on 3430SDP ES2; compile-tested with n800_defconfig.
Signed-off-by: Paul Walmsley <paul@pwsan.com>

size:
   text    data     bss     dec     hex filename
3391555  157032  107136 3655723  37c82b vmlinux.3430sdp.orig
3391555  156176  107136 3654867  37c4d3 vmlinux.3430sdp
Signed-off-by: Tony Lindgren <tony@atomide.com>

struct clockdomain contains a struct powerdomain *pwrdm and const char
*pwrdm_name.  The pwrdm_name is only used at initialization to look up
the appropriate pwrdm pointer.  Combining these into a union saves
about 100 bytes on 3430SDP.  This patch should not cause any change in
kernel function.

Boot-tested on 3430SDP ES2.
Signed-off-by: Paul Walmsley <paul@pwsan.com>

size:
   text    data     bss     dec     hex filename
3391587  157104  107136 3655827  37c893 vmlinux.3430sdp.orig
3391555  157032  107136 3655723  37c82b vmlinux.3430sdp
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds rtc-twl4030 driver specific code.
Signed-off-by: Girish S G <girishsg@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add the omap3_core_dpll_m2_set_rate() function to the OMAP3 clock code,
which calls into the SRAM function omap3_sram_configure_core_dpll() to
change the CORE DPLL M2 divider.  (SRAM code is necessary since rate changes
on clocks upstream from the SDRC can glitch SDRAM accesses.)

Use this function for the set_rate function pointer in the dpll3_m2_ck
struct clk.  With this function in place, PM/OPP code should be able to
alter SDRAM speed via code similar to:

      clk_set_rate(&dpll3_m2_ck, target_rate).
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

3430ES2+ CORE DPLL M2 divider can divide by 1 to 31, unlike ES1, which
was more limited.  The SRAM code currently only supports dividing by 1
or 2, but we should mask off the full range of bits to guard against
the event that the previous contents of CM_CLKSEL_PLL1 included an M2
divider > 2.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The only SRAM function currently used on OMAP3 is the CORE DPLL M2 divider
reprogramming function; remove the rest of the stubs.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add timing data for the Qimonda HYB18M512160AF-6 SDRAM chip, used on
the OMAP3430SDP boards.

Thanks to Rajendra Nayak <rnayak@ti.com> for his help identifying
the chip used on 3430SDP.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add timing data for the Micron MT46H32M32LF-6 SDRAM chip, used on the
OMAP3 Beagle and EVM boards.  Original timing data is from the Micron
datasheet PDF downloaded from:

http://download.micron.com/pdf/datasheets/dram/mobile/1gb_ddr_mobile_sdram_t48m.pdf

Thanks to Rajendra Nayak <rnayak@ti.com> for his help identifying
the chips used on Beagle & OMAP3EVM.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

For a given SDRAM clock rate, SDRAM chips require memory controllers
to use a specific set of timing minimums and maximums to transfer data
reliably.  These parameters can be different for different memory chips
and can also potentially vary by board.

This patch adds the infrastructure for board-*.c files to pass this
timing data to the SDRAM controller init function.  The timing data is
specified in an 'omap_sdrc_params' structure, in terms of SDRC
controller register values.  An array of these structs, one per SDRC
target clock rate, is passed by the board-*.c file to
omap2_init_common_hw().

This patch does not define the values for different memory chips, nor
does it use the values for anything; those will come in subsequent patches.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Separate SDRC code common to OMAP2/3 from mach-omap2/sdrc2xxx.c to
mach-omap2/sdrc.c.  Rename the OMAP2xxx-specific functions to use an
'omap2xxx' prefix rather than an 'omap2' prefix, and use "sdrc" in the
function names rather than "memory."  Mark several functions
as static that should not be used outside the sdrc2xxx.c file.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Rename arch/arm/mach-omap2/memory.c to arch/arm/mach-omap2/sdrc2xxx.c, since
it contains exclusively SDRAM-related functions.  Most of the functions
are also OMAP2xxx-specific - those which are common will be separated out
in a following patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Move the contents of the arch/arm/mach-omap2/memory.h file to the
existing include/asm-arm/arch-omap/sdrc.h file, and remove memory.h.
Modify files which include memory.h to include asm/arch/sdrc.h instead.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix sparse issues with smartreflex.c.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This cleans up remaining sparse warnings for OMAP2 builds and fixes a
few CodingStyle issues.  This involves:

- removing casts where they don't belong,

- adding casts where they should be,

- marking internal functions as static,

- fixing some indentation in board-2430sdp-flash.c.

Patch should cause no change in kernel behavior.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Mark casts between integers and pointers with __force to keep sparse
from complaining.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix the following sparse warnings:

arch/arm/mach-omap2/pm.c:58:6: warning: symbol 'omap2_block_sleep' was not declared. Should it be static?
arch/arm/mach-omap2/pm.c:63:6: warning: symbol 'omap2_allow_sleep' was not declared. Should it be static?
arch/arm/mach-omap2/pm.c:71:12: warning: symbol 'omap_pm_init' was not declared. Should it be static?

arch/arm/mach-omap2/pm34xx.c:49:6: warning: symbol '_omap_sram_idle' was not declared. Should it be static?

arch/arm/mach-omap2/prcm.c:96:5: warning: symbol 'cm_read_mod_reg' was not declared. Should it be static?
arch/arm/mach-omap2/prcm.c:103:6: warning: symbol 'cm_write_mod_reg' was not declared. Should it be static?
arch/arm/mach-omap2/prcm.c:110:5: warning: symbol 'cm_rmw_mod_reg_bits' was not declared. Should it be static?
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

I2C2 at BeagleBoard is connected to expansion connector, i.e. unused if
nothing is connected to this connector. As internal OMAP3 pull up resistors
are not strong enough, enabled but unused I2C2 bus results in error messages
(e.g. I2C timeouts). I2C2 should be enabled only if something is connected to
I2C2 at board's expansion connector and this extension has additional pull up
resistors for I2C2 bus.

- Add configuration option for this
- Use configuration option in board-omap3beagle
- While being there, add OMAP3 to OMAP I2C help text
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>