- 25 Sep, 2008 12 commits
-
-
Andy Fleming authored
Recent changes to MII bus initialization code added exit points which didn't free or iounmap the bus before returning. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11372. Signed-off-by:
Andy Fleming <afleming@freescale.com> Reported-by:
Daniel Marjamki <danielm77@spray.se> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
David Fries authored
Removing the module would cause a kernel oops as platform_driver_probe failed to detect a device and unregistered the platform driver on module init, and cleanup_module would unregister the already unregistered driver. The suspend and resume functions weren't being called. platform_driver support was added earlier, but without any platform_device_register* calls I don't think it was being used. Now all devices are registered using platform_device_register_simple and pointers are kept to unregister the ones that the probe failed for or unregister all devices on module shutdown. init_module no longer calls ne_init to reduce confusion (and multiple unregister paths that caused the rmmod oops). With the devices now registered they are added to the platform driver and get suspend and resume events. netif_device_detach(dev) was added before unregister_netdev(dev) when removing the region as occationally I would see a race condition where the device was still being used in unregister_netdev. Signed-off-by:
David Fries <david@fries.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Trent Piepho authored
The loop with the timeout used "while (... && timeout--)", which means than when the timeout occurs, "timeout" will be -1 after the loop has exited. The code that checks if the looped exited because of a timeout used "if (timeout <= 0)". Seems ok, except timeout is unsigned, and (unsigned)-1 isn't less than zero! Using "--timeout" in the loop fixes this problem, as now "timeout" will be 0 when the loop times out. This also fixes a bug in the existing code, where it will erroneously think a timeout occurred if the condition the loop was waiting for is satisfied on the final iteration before a timeout. Signed-off-by:
Trent Piepho <tpiepho@freescale.com> Acked-by:
-
Bruce Allan authored
When the driver fails to acquire the control flag used to serialize NVM and PHY accesses between the driver, firmware and hardware, remove the request for the flag otherwise the hardware might grant the flag when it becomes available but the driver will not release the flag. This could cause the firmware to prevent the driver getting the flag for all future attempts. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Scott Feldman authored
Bug fix: don't set netdev->name early before netdev registration. Setting netdev->name early with dev_alloc_name() would occasionally cause netdev registration to fail returning error that device was already registered. Since we're using netdev->name to name MSI-X vectors, we now need to move the request_irq after netdev registartion, so move it to ->open. Signed-off-by:
Scott Feldman <scofeldm@cisco.com> Signed-off-by:
-
Scott Feldman authored
Bug fix: Free MSI intr with correct data handle Use davem proposed naming for MSI-X tx/rx vectors (ethX-tx-0, ethX-rx-0) Signed-off-by:
-
Scott Feldman authored
Fixes for review items from Ben Hutchings: - use netdev->net_stats rather than private net_stats - use ethtool op .get_sset_count rather than .get_stats_count - err out if setting Tx/Rx csum or TSO using ethtool and setting is not enabled for device. - pass in jiffies + constant to round_jiffies - return err if new MTU is out-of-bounds Signed-off-by:
-
Scott Feldman authored
LRO is only applied to IPv4 pkts, so don't use the LRO indication functions for anything other IPv4 pkts. Every non-IPv4 pkt is indicated using non- LRO functions. Signed-off-by:
-
Florian Fainelli authored
This patch fixes a wrong assignment in r6040_free_txbufs on a receive skb pointer while we should actually do this on the transmit skb pointer. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Ursula Braun authored
Do not touch IFF_UP flag during qeth recovery, but invoke dev_close() in case of failing recovery. Cancel outstanding control commands in case of Data Checks or Channel Checks. Do not invoke qeth_l2_del_all_mc() in case of a hard stop to speed up removal of qeth devices. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
Real HiperSocket devices in layer2 mode have a firmware-created MAC-address. This change enables the qeth driver to use this firmware MAC-address for layer2 HiperSocket devices. Signed-off-by:
-
-
- 24 Sep, 2008 28 commits
-
-
David S. Miller authored
-
Stephen Hemminger authored
This patch allows reporting the link, checksum, and feature settings of bonded device by using generic hooks. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Dhananjay Phadke authored
NX3031 firmware now supports MSI-X interrupts on Quad GbE boards. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
-
Dan Nicholson authored
Check if the link is available when a changed interrupt has been received and set the carrier status appropriately. The code is copied nearly verbatim from the dl2k module. The link status could be used in more places in the driver, but this is enough to get the carrier status reported to userspace. Fixes kernel bug #7487: http://bugzilla.kernel.org/show_bug.cgi?id=7487 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:Dan Nicholson <dbn.lists@gmail.com> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Hannes Hering authored
This patch adds the capability flag to the capability list for dynamic LPAR memory remove to enable this feature. Signed-off-by:
Hannes Hering <hering2@de.ibm.com> Signed-off-by:
-
Denis Joseph Barrow authored
Patch to stop loss of characters on the hso modems, this patch throttles & unthrottles the modem by not putting out urbs until the tty/line discipline layer has enough space for newly received packets. serial ports. This is required for firmware diagnostics being done at Option. Signed-off-by:
Denis Joseph Barrow <D.Barow@option.com> Signed-off-by:
-
Brice Goglin authored
Use DCA in myri10ge when CONFIG_DCA_MODULE is set as well. And thus force INTEL_IOATDMA to =y so that DCA=y if we are =y. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Divy Le Ray authored
The generic lro code checks TCP flags/options. Remove duplicate tests done in the driver. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Francois Romieu authored
drivers/built-in.o: In function `rtl8169_gset_xmii': r8169.c:(.text+0x82259): undefined reference to `mii_ethtool_gset' Signed-off-by:
Hugh Dickins <hugh@veritas.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by:
-
Sebastien Dugue authored
Looks like to me that the ehea_fw_handles.lock mutex and the ehea_bcmc_regs.lock spinlock are taken much longer than necessary and could as well be pushed inside the functions that need them (ehea_update_firmware_handles() and ehea_update_bcmc_registrations()) rather than at each callsite. Signed-off-by:
Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by:
-
Jesse Brandeburg authored
ixgbe can depend on dca IF it is enabled. So if we are compiled as IXGBE=y, and DCA is enabled, then we must force INTEL_IOATDMA and therefore DCA to be =y also. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch cleans up some whitespace items, reorders a couple of functions, and removes some outdated comments. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch corrects support for NAPI so that queues are correctly added and removed during suspend/resume in the event that the number of MSI-X vectors changes. Signed-off-by:
-
Peter P Waskiewicz authored
This patch cleans up a bit of whitespace issues with the driver, updates the copyright information, and bumps the version number up. Signed-off-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
Jeff Kirsher authored
Signed-off-by:
-
Jesse Brandeburg authored
ixgbe_xmit_frame can be refactored to use fewer locals and better utilize common kernel macros. also fixed minor buglet with internal to driver vlan flag variable being passed incorrectly. Signed-off-by:
-
Jesse Brandeburg authored
some functions were un-necessarily using local variables. Signed-off-by:
-
Jesse Brandeburg authored
Signed-off-by:
-
Jesse Brandeburg authored
This is partial preparation for a future patch which will extend ixgbe_set_num_queues Signed-off-by:
-
Jesse Brandeburg authored
clean up the hardware shutdown sequence to prevent hardware from continuing to send when resetting or unloading. Signed-off-by:
-
Jesse Brandeburg authored
This is a massive update that includes infrastructure for further patches where we will add support for more phy types and eeprom types. This code is shared as much as possible with other drivers, so the code may seem a little obtuse at times but wherever possible we keep to the linux style and methods. Signed-off-by:
-
Jesse Brandeburg authored
in some configurations there can be more than one rx queue per vector in msi-x mode. Add functionality to be able to clean this without changing the performance path single-rx-queue cleanup. Signed-off-by:
-
Jesse Brandeburg authored
Signed-off-by:
-
Jesse Brandeburg authored
changing ring sizes in ethtool needs to be robust. If an allocation fails the driver must continue operation, with the previous settings. Signed-off-by:
-
Jesse Brandeburg authored
Signed-off-by:
-
Jesse Brandeburg authored
most of the time we only need 1500 bytes for a packet which means we don't need a whole 4k page for each packet. Share the allocation by using a reference count to the page and giving half to two receive descriptors. This can enable us to use packet split mode all the time due to the performance increase of allocating half the pages. Signed-off-by:
-
Jesse Brandeburg authored
when using more than 8 tx queues you can overrun the 8 bit v_idx field, so change it to 16 bits to represent the maximum number of queues (one for each bit) Signed-off-by:
-
