- 10 Oct, 2007 40 commits
-
-
Daniel Lezcano authored
The core patchset of the network namespace sent by Eric Biederman does not do dynamic loopback creation. So there is no call to alloc_netdev_mq which fills the network namespace field of the netdevice. This patch assign the loopback to the init network namespace. Signed-off-by:
Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Lezcano authored
Add the appropriate EXPORT_SYMBOLS for proc_net_create, proc_net_fops_create and proc_net_remove to fix errors when compiling allmodconfig Signed-off-by:
Mark Nelson <markn@au1.ibm.com> Acked-by:
Benjamin Thery <benjamin.thery@bull.net> Signed-off-by:
-
Thomas Graf authored
This change allows the generic attribute interface to be used within the netfilter subsystem where this flag was initially introduced. The byte-order flag is yet unused, it's intended use is to allow automatic byte order convertions for all atomic types. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
David S. Miller authored
Requested by Johannes Berg. Signed-off-by: -
Eric Dumazet authored
When the periodic IP route cache flush is done (every 600 seconds on default configuration), some hosts suffer a lot and eventually trigger the "soft lockup" message. dst_run_gc() is doing a scan of a possibly huge list of dst_entries, eventually freeing some (less than 1%) of them, while holding the dst_lock spinlock for the whole scan. Then it rearms a timer to redo the full thing 1/10 s later... The slowdown can last one minute or so, depending on how active are the tcp sessions. This second version of the patch converts the processing from a softirq based one to a workqueue. Even if the list of entries in garbage_list is huge, host is still responsive to softirqs and can make progress. Instead of resetting gc timer to 0.1 second if one entry was freed in a gc run, we do this if more than 10% of entries were freed. Before patch : Aug 16 06:21:37 SRV1 kernel: BUG: soft lockup detected on CPU#0! Aug 16 06:21:37 SRV1 kernel: Aug 16 06:21:37 SRV1 kernel: Call Trace: Aug 16 06:21:37 SRV1 kernel: <IRQ> [<ffffffff802286f0>] wake_up_process+0x10/0x20 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80251e09>] softlockup_tick+0xe9/0x110 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd380>] dst_run_gc+0x0/0x140 Aug 16 06:21:37 SRV1 kernel: [<ffffffff802376f3>] run_local_timers+0x13/0x20 Aug 16 06:21:37 SRV1 kernel: [<ffffffff802379c7>] update_process_times+0x57/0x90 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80216034>] smp_local_timer_interrupt+0x34/0x60 Aug 16 06:21:37 SRV1 kernel: [<ffffffff802165cc>] smp_apic_timer_interrupt+0x5c/0x80 Aug 16 06:21:37 SRV1 kernel: [<ffffffff8020a816>] apic_timer_interrupt+0x66/0x70 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd3d3>] dst_run_gc+0x53/0x140 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd3c6>] dst_run_gc+0x46/0x140 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80237148>] run_timer_softirq+0x148/0x1c0 Aug 16 06:21:37 SRV1 kernel: [<ffffffff8023340c>] __do_softirq+0x6c/0xe0 Aug 16 06:21:37 SRV1 kernel: [<ffffffff8020ad6c>] call_softirq+0x1c/0x30 Aug 16 06:21:37 SRV1 kernel: <EOI> [<ffffffff8020cb34>] do_softirq+0x34/0x90 Aug 16 06:21:37 SRV1 kernel: [<ffffffff802331cf>] local_bh_enable_ip+0x3f/0x60 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80422913>] _spin_unlock_bh+0x13/0x20 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803dfde8>] rt_garbage_collect+0x1d8/0x320 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd4dd>] dst_alloc+0x1d/0xa0 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803e1433>] __ip_route_output_key+0x573/0x800 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803c02e2>] sock_common_recvmsg+0x32/0x50 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803e16dc>] ip_route_output_flow+0x1c/0x60 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80400160>] tcp_v4_connect+0x150/0x610 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803ebf07>] inet_bind_bucket_create+0x17/0x60 Aug 16 06:21:37 SRV1 kernel: [<ffffffff8040cd16>] inet_stream_connect+0xa6/0x2c0 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80422981>] _spin_lock_bh+0x11/0x30 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803c0bdf>] lock_sock_nested+0xcf/0xe0 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80422981>] _spin_lock_bh+0x11/0x30 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803be551>] sys_connect+0x71/0xa0 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803eee3f>] tcp_setsockopt+0x1f/0x30 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803c030f>] sock_common_setsockopt+0xf/0x20 Aug 16 06:21:37 SRV1 kernel: [<ffffffff803be4bd>] sys_setsockopt+0x9d/0xc0 Aug 16 06:21:37 SRV1 kernel: [<ffffffff8028881e>] sys_ioctl+0x5e/0x80 Aug 16 06:21:37 SRV1 kernel: [<ffffffff80209c4e>] system_call+0x7e/0x83 After patch : (RT_CACHE_DEBUG set to 2 to get following traces) dst_total: 75469 delayed: 74109 work_perf: 141 expires: 150 elapsed: 8092 us dst_total: 78725 delayed: 73366 work_perf: 743 expires: 400 elapsed: 8542 us dst_total: 86126 delayed: 71844 work_perf: 1522 expires: 775 elapsed: 8849 us dst_total: 100173 delayed: 68791 work_perf: 3053 expires: 1256 elapsed: 9748 us dst_total: 121798 delayed: 64711 work_perf: 4080 expires: 1997 elapsed: 10146 us dst_total: 154522 delayed: 58316 work_perf: 6395 expires: 25 elapsed: 11402 us dst_total: 154957 delayed: 58252 work_perf: 64 expires: 150 elapsed: 6148 us dst_total: 157377 delayed: 57843 work_perf: 409 expires: 400 elapsed: 6350 us dst_total: 163745 delayed: 56679 work_perf: 1164 expires: 775 elapsed: 7051 us dst_total: 176577 delayed: 53965 work_perf: 2714 expires: 1389 elapsed: 8120 us dst_total: 198993 delayed: 49627 work_perf: 4338 expires: 1997 elapsed: 8909 us dst_total: 226638 delayed: 46865 work_perf: 2762 expires: 2748 elapsed: 7351 us I successfully reduced the IP route cache of many hosts by a four factor thanks to this patch. Previously, I had to disable "ip route flush cache" to avoid crashes. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
David S. Miller authored
My bad. Signed-off-by: -
David S. Miller authored
We will undo this once it is actually used. Signed-off-by: -
Eric W. Biederman authored
Until we support multiple network namespaces with netfilter only allow netfilter configuration in the initial network namespace. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
The simplest thing to implement is moving network devices between namespaces. However with the same attribute IFLA_NET_NS_PID we can easily implement creating devices in the destination network namespace as well. However that is a little bit trickier so this patch sticks to what is simple and easy. A pid is used to identify a process that happens to be a member of the network namespace we want to move the network device to. Signed-off-by:
-
Eric W. Biederman authored
This patch introduces NETIF_F_NETNS_LOCAL a flag to indicate a network device is local to a single network namespace and should never be moved. Useful for pseudo devices that we need an instance in each network namespace (like the loopback device) and for any device we find that cannot handle multiple network namespaces so we may trap them in the initial network namespace. This patch introduces the function dev_change_net_namespace a function used to move a network device from one network namespace to another. To the network device nothing special appears to happen, to the components of the network stack it appears as if the network device was unregistered in the network namespace it is in, and a new device was registered in the network namespace the device was moved to. This patch sets up a namespace device destructor that upon the exit of a network namespace moves all of the movable network devices to the initial network namespace so they are not lost. Signed-off-by:
-
Eric W. Biederman authored
When forcibly changing the network namespace of a device I need something that can generate a name for the device in the new namespace without overwriting the old name. __dev_alloc_name provides me that functionality. Signed-off-by:
-
Eric W. Biederman authored
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by:
-
Eric W. Biederman authored
Each netlink socket will live in exactly one network namespace, this includes the controlling kernel sockets. This patch updates all of the existing netlink protocols to only support the initial network namespace. Request by clients in other namespaces will get -ECONREFUSED. As they would if the kernel did not have the support for that netlink protocol compiled in. As each netlink protocol is updated to be multiple network namespace safe it can register multiple kernel sockets to acquire a presence in the rest of the network namespaces. The implementation in af_netlink is a simple filter implementation at hash table insertion and hash table look up time. Signed-off-by:
-
Eric W. Biederman authored
Every user of the network device notifiers is either a protocol stack or a pseudo device. If a protocol stack that does not have support for multiple network namespaces receives an event for a device that is not in the initial network namespace it quite possibly can get confused and do the wrong thing. To avoid problems until all of the protocol stacks are converted this patch modifies all netdev event handlers to ignore events on devices that are not in the initial network namespace. As the rest of the code is made network namespace aware these checks can be removed. Signed-off-by:
-
Eric W. Biederman authored
This patch modifies every packet receive function registered with dev_add_pack() to drop packets if they are not from the initial network namespace. This should ensure that the various network stacks do not receive packets in a anything but the initial network namespace until the code has been converted and is ready for them. Signed-off-by:
-
Eric W. Biederman authored
Except for carefully selected pseudo devices all network interfaces should start out in the initial network namespace. Ultimately it will be register_netdev that examines what dev->nd_net is set to and places a device in a network namespace. This patch modifies alloc_netdev to initialize the network namespace a device is in with the initial network namespace. This gets it right for the vast majority of devices so their drivers need not be modified and for those few pseudo devices that need something different they can change this parameter before calling register_netdevice. The network namespace parameter on a network device is not reference counted as the devices are inside of a network namespace and cannot remain in that namespace past the lifetime of the network namespace. Signed-off-by:
-
Eric W. Biederman authored
This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by:
-
Eric W. Biederman authored
This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by:
-
Eric W. Biederman authored
Sockets need to get a reference to their network namespace, or possibly a simple hold if someone registers on the network namespace notifier and will free the sockets when the namespace is going to be destroyed. Signed-off-by:
-
Eric W. Biederman authored
Please note that network devices do not increase the count count on the network namespace. The are inside the network namespace and so the network namespace tag is in the nature of a back pointer and so getting and putting the network namespace is unnecessary. Signed-off-by:
-
Eric W. Biederman authored
This is the network namespace from which all which all sockets and anything else under user control ultimately get their network namespace parameters. Signed-off-by:
-
Eric W. Biederman authored
This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by:
-
Eric W. Biederman authored
The current implementation of dev_ifname makes maintenance difficult because updates to the implementation of the ioctl have to made in two places. So this patch updates dev_ifname32 to do a classic 32/64 structure conversion and call sys_ioctl like the rest of the compat calls do. Signed-off-by:
-
Eric W. Biederman authored
This slightly improves code safety and clarity. Later network namespace patches touch this code so this is a preliminary cleanup. Signed-off-by:
-
Joy Latten authored
This patch modifies the current ipsec audit layer by breaking it up into purpose driven audit calls. So far, the only audit calls made are when add/delete an SA/policy. It had been discussed to give each key manager it's own calls to do this, but I found there to be much redundnacy since they did the exact same things, except for how they got auid and sid, so I combined them. The below audit calls can be made by any key manager. Hopefully, this is ok. Signed-off-by:
Joy Latten <latten@austin.ibm.com> Signed-off-by:
-
John Heffner authored
The type of owner in sock_lock_t is currently (struct sock_iocb *), presumably for historical reasons. It is never used as this type, only tested as NULL or set to (void *)1. For clarity, this changes it to type int, and renames to owned, to avoid any possible type casting errors. Signed-off-by:
John Heffner <jheffner@psc.edu> Signed-off-by:
-
John Heffner authored
Changes asserts in sunrpc to use sock_owned_by_user() macro instead of referencing sock_lock.owner directly. Signed-off-by:
-
Andy Gospodarek authored
Removed sparse warnings from tg3 driver. The new logic seems fine (I don't immediately see where we are running over values for any of the variables that need to be saved). This patch compiles fine and I'm currently using a tg3 with the patched driver to post this patch as a basic proof of concept. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Stephen Hemminger authored
Andi mentioned he did something like this already, but never submitted it. The dhcp client application uses AF_PACKET with a packet filter to receive data. The application doesn't even use timestamps, but because the AF_PACKET API has timestamps, they get turned on globally which causes an expensive time of day lookup for every packet received on any system that uses the standard DHCP client. The fix is to not enable the timestamp (but use if if available). This causes the time lookup to only occur on those packets that are destined for the AF_PACKET socket. The timestamping occurs after packet filtering so all packets dropped by filtering to not cause a clock call. The one downside of this a a few microseconds additional delay added from the normal timestamping location (netif_rx) until the receive callback in AF_PACKET. But since the offset is fairly consistent it should not upset applications that do want really use timestamps, like wireshark. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Micah Gruber authored
This trivial patch removes the unneeded pointer newdp, which is never used. Signed-off-by:
Micah Gruber <micah.gruber@gmail.com> Signed-off-by:
-
Micah Gruber authored
This trivial patch removes the unneeded pointer iph, which is never used. Signed-off-by:
-
Johannes Berg authored
The sta_info.assoc_ap value is used as a flag, move it into flags. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Michael Wu <flamingice@sourmilk.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Johannes Berg authored
This removes some definitions that are used only within ioctls that will never make it into mainline. Signed-off-by:
-
Johannes Berg authored
When I changed the code there I forgot to mention what happens with multicast frames in a regular BSS and keep wondering myself if the code is correct. Add appropriate comments. Signed-off-by:
-
John W. Linville authored
In STA mode, the AP will echo our traffic. This includes multicast traffic. Receiving these frames confuses some protocols and applications, notably IPv6 Duplicate Address Detection. Signed-off-by:
-
Johannes Berg authored
This cleans up some whitespace to make the mac80211 version in mainline diverge less from wireless-dev. Signed-off-by:
-
Johannes Berg authored
It looks like in commit 28487a90 the condition was unintentionally negated by moving some code, fix it. Signed-off-by:
-
Larry Finger authored
The current version of wireless statistics contains a bug in the averaging that makes the numbers be too sticky and not react to small changes. This patch removes all averaging. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Jiri Benc <jbenc@suse.cz> Signed-off-by:
-
Johannes Berg authored
Add a new file 'ifindex' to each key's debugfs dir to allow finding which interface the key was configured on. This isn't done as a symlink because of possible netdev name changes. Signed-off-by:
-
Johannes Berg authored
This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by:
-
