- 03 Jul, 2009 5 commits
-
-
Eric Dumazet authored
Linus noticed that the 32-bit version of atomic64_read() was being overly complex with re-reading the value and doing a retry loop over that. Instead we can just rely on cmpxchg8b returning either the new value or returning the current value. We can use any 'old' value, which will be faster as it can be loaded via immediates. Using some value that is not equal to the real value in memory the instruction gets faster. This also has the advantage that the CPU could avoid dirtying the cacheline. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Linus noted that the atomic64_t primitives are all inlines currently which is crazy because these functions have a large register footprint anyway. Move them to a separate file: arch/x86/lib/atomic64_32.c Also, while at it, rename all uses of 'unsigned long long' to the much shorter u64. This makes the appearance of the prototypes a lot nicer - and it also uncovered a few bugs where (yet unused) API variants had 'long' as their return type instead of u64. [ More intrusive changes are not yet done in this patch. ] Reported-by:
-
Eric Dumazet authored
Locked instructions on two cache lines at once are painful. If atomic64_t uses two cache lines, my test program is 10x slower. The chance for that is significant: 4/32 or 12.5%. Make sure an atomic64_t is 8 bytes aligned. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain> [ changed it to __aligned(8) as per Andrew's suggestion ] Signed-off-by:
-
Ingo Molnar authored
Certain versions of GCC dont see the initialization that is done here: builtin-report.c: In function ‘__cmd_report’: builtin-report.c:1038: warning: ‘syms’ may be used uninitialized in this function So annotate it with a NULL initialization. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Ingo Molnar wrote: > i just bisected a 'perf report' bug that would cause us to not > resolve all user-space symbols in a 'git gc' run to: > > f5812a7a is first bad commit > commit f5812a7a > Author: Arnaldo Carvalho de Melo <acme@redhat.com> > Date: Tue Jun 30 11:43:17 2009 -0300 > > perf_counter tools: Adjust only prelinked symbol's addresses Rename ->prelinked to ->adjust_symbols and making what was done only for prelinked libraries also to ET_EXEC binaries, such as /usr/bin/git: [acme@doppio pahole]$ readelf -h /usr/bin/git | grep Type Type: EXEC (Executable file) [acme@doppio pahole]$ And after installing the 'git-debuginfo' package, I get correct results: [acme@doppio linux-2.6-tip]$ perf report --sort comm,dso,symbol -d /usr/bin/git | head -20 # # (1139614 samples) # # Overhead Command Shared Object Symbol # ........ ................ ......................... ...... # 34.98% git /usr/bin/git [.] send_sideband 33.39% git /usr/bin/git [.] enter_repo 6.81% git /usr/bin/git [.] diff_opt_parse 4.95% git /usr/bin/git [.] is_repository_shallow 3.24% git /usr/bin/git [.] odb_mkstemp 1.39% git /usr/bin/git [.] output 1.34% git /usr/bin/git [.] xmmap 1.25% git /usr/bin/git [.] receive_pack_config 1.16% git /usr/bin/git [.] git_pathdup 0.90% git /usr/bin/git [.] read_object_with_reference 0.86% git /usr/bin/git [.] show_patch_diff 0.85% git /usr/bin/git 0x00000000095e2e 0.69% git /usr/bin/git [.] display [acme@doppio linux-2.6-tip]$ I'll check what are the last cases where we can't resolve symbols, like this 0x00000000095e2e later. And I guess this will fix the problems Mike were seeing too: [acme@doppio linux-2.6-tip]$ readelf -h ../build/perf/vmlinux | grep Type Type: EXEC (Executable file) [acme@doppio linux-2.6-tip]$ Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
-
- 02 Jul, 2009 10 commits
-
-
Frederic Weisbecker authored
This adds the use of colors to signal at a glance the important overhead thresholds in callchains hit rates. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246558475-10624-3-git-send-email-fweisbec@gmail.com> Signed-off-by:
-
Frederic Weisbecker authored
Among perf annotate, perf report and perf top, we can find the common colored printing of percents according to the following rules: High overhead = > 5%, colored in red Mid overhead = > 0.5%, colored in green Low overhead = < 0.5%, default color Factorize these multiple checks in a single function named percent_color_fprintf() and also provide a get_percent_color() for sites which print percentages and other things at the same time. Signed-off-by: -
Frederic Weisbecker authored
Callchains output may become a burden on a trace because even rarely hit site are exposed. This can be too much information. Let the user set a threshold as a minimum percent of hits using the new pattern for the -c option: -c mode,min_percent Example: $ perf report -s sym -c flat,4 8.25% [k] copy_user_generic_string 4.19% copy_user_generic_string generic_file_aio_read do_sync_read vfs_read sys_pread64 system_call_fastpath pread64 5.39% [k] search_by_key 4.63% 0x00000000009e0a 2.36% [k] memcpy_c [...] $ perf report -s sym -c graph,2 8.25% [k] copy_user_generic_string | |--4.31%-- generic_file_aio_read | do_sync_read | vfs_read | | | --4.19%-- sys_pread64 | system_call_fastpath | pread64 | --3.24%-- generic_file_buffered_write __generic_file_aio_write_nolock generic_file_aio_write do_sync_write reiserfs_file_write vfs_write | --3.14%-- sys_pwrite64 system_call_fastpath __pwrite64 5.39% [k] search_by_key | --2.23%-- reiserfs_update_sd_size 4.63% 0x00000000009e0a 2.36% [k] memcpy_c [...] You can also omit it and it will default to 0. Signed-off-by: -
Frederic Weisbecker authored
Currently, the printing of callchains is done in a single vertical level, this is the "flat" mode: 8.25% [k] copy_user_generic_string 4.19% copy_user_generic_string generic_file_aio_read do_sync_read vfs_read sys_pread64 system_call_fastpath pread64 This patch introduces a new "graph" mode which provides a hierarchical output of factorized paths recursively sorted: 8.25% [k] copy_user_generic_string | |--4.31%-- generic_file_aio_read | do_sync_read | vfs_read | | | |--4.19%-- sys_pread64 | | system_call_fastpath | | pread64 | | | --0.12%-- sys_read | system_call_fastpath | __read | |--3.24%-- generic_file_buffered_write | __generic_file_aio_write_nolock | generic_file_aio_write | do_sync_write | reiserfs_file_write | vfs_write | | | |--3.14%-- sys_pwrite64 | | system_call_fastpath | | __pwrite64 | | | --0.10%-- sys_write [...] The command line has then changed. By providing the -c option, the callchain will output in the flat mode by default. But you can override it: perf report -c graph or perf report -c flat You can also pass the abreviated mode: perf report -c g or perf report -c gra will both make use of the graph mode. Signed-off-by: -
Frederic Weisbecker authored
There is no predefined macro to create an option that can have a custom value or a default one if none is given. This patch provides a new helper OPT_CALLBACK_DEFAULT() which defines such kind of option. For example, considering an option -c, we want to get the default value in the following cases: perf command -c -d perf command -d -c And the foo value when it's given: perf command -c foo -d perf command -d -c foo That's also why PARSE_OPT_LASTARG_DEFAULT is extended here to support default values whatever the position of the option, not only in the end. Should it now be renamed to PARSE_OPT_ARG_DEFAULT ? Signed-off-by: -
Frederic Weisbecker authored
Iterating through children of a node in the callchain tree shows something that may be quite confusing at a first glance. The head is the children field of the parent and the list nodes are in the brothers field of the children. This is because the childs are linked to the parent as a list of "brothers" using the "children" list of the parent as a head: --------------- | Parent (head) |------------------------------------- --------------- | | | children | | | ----------- ----------- | | 1st child |---brother---| 2nd child |---brother----- ----------- ----------- This makes the following strange pattern often occuring: list_for_each_entry(child, &parent->children, brothers) { // do something with children } Abstract it to chain_for_each_child() to factorize and simplify this pattern. Signed-off-by: -
Mike Galbraith authored
Add the -m/--modules option to perf report and perf annotate, which enables live module symbol/image loading. To be used with -k/--vmlinux. (Also give perf annotate a -P/--full-paths option.) Signed-off-by:
Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246514986.13293.48.camel@marge.simson.net> Signed-off-by:
-
Mike Galbraith authored
Signed-off-by:
-
Mike Galbraith authored
Add infrastructure for module path discovery and section load addresses. Signed-off-by:
-
Mike Galbraith authored
perf_counter tools: Make symbol loading consistently return number of loaded symbols. Signed-off-by:
-
- 01 Jul, 2009 25 commits
-
-
Frederic Weisbecker authored
Building builtin-stat.c reports the following errors: cc1: warnings being treated as errors builtin-stat.c: In function ‘run_perf_stat’: builtin-stat.c:242: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result builtin-stat.c:255: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result make: *** [builtin-stat.o] Erreur 1 This patch handles the possible pipe read failures. Signed-off-by:
-
Frederic Weisbecker authored
About every callchains recorded with perf record are filled up including the internal perfcounter nmi frame: perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi We want ignore this frame as it's not interesting for instrumentation. To solve this, we simply ignore every frames from nmi context. New example of "perf report -s sym -c" after this patch: 9.59% [k] search_by_key 4.88% search_by_key reiserfs_read_locked_inode reiserfs_iget reiserfs_lookup do_lookup __link_path_walk path_walk do_path_lookup user_path_at vfs_fstatat vfs_lstat sys_newlstat system_call_fastpath __lxstat 0x406fb1 3.19% search_by_key search_by_entry_key reiserfs_find_entry reiserfs_lookup do_lookup __link_path_walk path_walk do_path_lookup user_path_at vfs_fstatat vfs_lstat sys_newlstat system_call_fastpath __lxstat 0x406fb1 [...] For now this patch only solves the problem in x86-64. Signed-off-by: -
Arnaldo Carvalho de Melo authored
The copy we were using came from another copy I did for the dwarves (pahole) package, that came from the kernel years ago. The only function that is used by the perf tools and that isn't in the kernel is list_del_range, that I'm leaving in the perf tools only for now. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090701174608.GA5823@ghostprotocols.net> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
The tools/perf/util/rbtree.c copy already drifted by three csets: 4b324126 4c601178 16c047ad So remove the copy and use the lib/rbtree.c directly, sharing the source code while still generating a separate object file, since tools/perf uses a far more agressive -O6 switch. Signed-off-by:
-
Jaswinder Singh Rajput authored
After: $ ./perf list List of pre-defined events (to be used in -e): cpu-cycles OR cycles [Hardware event] instructions [Hardware event] cache-references [Hardware event] cache-misses [Hardware event] branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cpu-clock [Software event] task-clock [Software event] page-faults OR faults [Software event] minor-faults [Software event] major-faults [Software event] context-switches OR cs [Software event] cpu-migrations OR migrations [Software event] L1-d$-loads [Hardware cache event] L1-d$-load-misses [Hardware cache event] L1-d$-stores [Hardware cache event] L1-d$-store-misses [Hardware cache event] L1-d$-prefetches [Hardware cache event] L1-d$-prefetch-misses [Hardware cache event] L1-i$-loads [Hardware cache event] L1-i$-load-misses [Hardware cache event] L1-i$-prefetches [Hardware cache event] L1-i$-prefetch-misses [Hardware cache event] LLC-loads [Hardware cache event] LLC-load-misses [Hardware cache event] LLC-stores [Hardware cache event] LLC-store-misses [Hardware cache event] LLC-prefetches [Hardware cache event] LLC-prefetch-misses [Hardware cache event] dTLB-loads [Hardware cache event] dTLB-load-misses [Hardware cache event] dTLB-stores [Hardware cache event] dTLB-store-misses [Hardware cache event] dTLB-prefetches [Hardware cache event] dTLB-prefetch-misses [Hardware cache event] iTLB-loads [Hardware cache event] iTLB-load-misses [Hardware cache event] branch-loads [Hardware cache event] branch-load-misses [Hardware cache event] rNNN [raw hardware event descriptor] Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1246453578.3072.1.camel@ht.satnam> Signed-off-by:
-
Jaswinder Singh Rajput authored
MATCH_EVENT is useful: 1. for multiple attrs checking 2. avoid repetition of PERF_TYPE_ and PERF_COUNT_ and save space 3. avoids line breakage Signed-off-by:
-
Ingo Molnar authored
Enable -Wextra. This found a few real bugs plus a number of signed/unsigned type mismatches/uncleanlinesses. It also required a few annotations All things considered it was still worth it so lets try with this enabled for now. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Fix: builtin-report.c: In function ‘hist_entry__add’: builtin-report.c:1015: error: case label not within a switch statement builtin-report.c:1017: error: break statement not within loop or switch Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Paul Mackerras authored
This reworks the parser for event descriptors to make it more consistent in what it accepts. It is now structured as a recursive descent parser for the following grammar: events ::= event ( ("," | space) space* event )* event ::= ( raw_event | numeric_event | symbolic_event | generic_hw_event ) [ event_modifier ] raw_event ::= "r" hex_number numeric_event ::= number ":" number number ::= decimal_number | "0x" hex_number | "0" octal_number symbolic_event ::= string_from_event_symbols_array generic_hw_event::= cache_type ( "-" ( cache_op | cache_result ) )* event_modifier ::= ":" ( "u" | "k" | "h" )+ with the extra restriction that you can have at most one cache_op and at most one cache_result. We pass the current string pointer by reference (i.e. as a const char **) to the various parsing functions so that they can advance the pointer to indicate how much they consumed. They return 0 if they didn't recognize the thing at the pointer or 1 if they did (and advance the pointer past it). This also fixes parse_aliases to take the longest matching alias from the table, not the first one. Otherwise "l1-data" would match the "l1-d" alias and the "ata" would not be consumed. This allows event modifiers indicating what processor modes to count in to be applied to any event, not just numeric events, and adds a ":h" modifier to indicate counting in hypervisor mode. Specifying ":u" now sets both exclude_kernel and exclude_hv, and so on. Multiple modes can be specified, e.g. ":uk" will count in user or hypervisor mode (i.e. only exclude_kernel will be set). Signed-off-by:Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <19018.53826.843815.189847@cargo.ozlabs.ibm.com> Signed-off-by:
-
Anton Blanchard authored
POWER7 has the same PR/HV bit layout as POWER6, so set the flag. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
-
Frederic Weisbecker authored
The symbol resolving has of course revealed some bugs in the callchain tree handling. This patch fixes some of them, including: - inherit the children from the parents while splitting a node - fix list range moving - fix indexes setting in callchains - create a child on the current node if the path doesn't match in the existent children (was only done on the root) - compare using symbols when possible so that we can match a function using any ip inside by referring to its start address. The practical effects are: - remove double callchains - fix upside down or any random order of callchains - fix wrong paths - fix bad hits and percentage accounts Signed-off-by:
-
Frederic Weisbecker authored
This patch resolves the names, when possible, of each ip present in the callchains while using the -c option with perf report. Example: 5.40% [k] __d_lookup 5.37% perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi do_lookup __link_path_walk path_walk do_path_lookup user_path_at sys_faccessat sys_access system_call_fastpath 0x7fb609846f77 0.01% perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi do_lookup __link_path_walk path_walk do_path_lookup user_path_at sys_faccessat Signed-off-by: -
Frederic Weisbecker authored
Fix a confusion while giving the size of a callchain list during its allocation. We are using the wrong structure size. Signed-off-by:
-
Ingo Molnar authored
Merge reason: this branch was on a .30-ish base before, update it to an almost-.31-rc2 upstream base to pick up fixes. Signed-off-by: -
git://linux-arm.org/linux-2.6Linus Torvalds authored
* 'kmemleak' of git://linux-arm.org/linux-2.6: kmemleak: Inform kmemleak about pid_hash kmemleak: Do not warn if an unknown object is freed kmemleak: Do not report new leaked objects if the scanning was stopped kmemleak: Slightly change the policy on newly allocated objects kmemleak: Do not trigger a scan when reading the debug/kmemleak file kmemleak: Simplify the reports logged by the scanning thread kmemleak: Enable task stacks scanning by default kmemleak: Allow the early log buffer to be configurable.
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm table: fix blk_stack_limits arg to use bytes not sectors dm exception store: really fix type lookup
-
Linus Torvalds authored
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits) perf report: Add --symbols parameter perf report: Add --comms parameter perf report: Add --dsos parameter perf_counter tools: Adjust only prelinked symbol's addresses perf_counter: Provide a way to enable counters on exec perf_counter tools: Reduce perf stat measurement overhead/skew perf stat: Use percentages for scaling output perf_counter, x86: Update x86_pmu after WARN() perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run perf stat: Improve output perf stat: Fix multi-run stats perf stat: Add -n/--null option to run without counters perf_counter tools: Remove dead code perf_counter: Complete counter swap perf report: Print sorted callchains per histogram entries perf_counter tools: Prepare a small callchain framework perf record: Fix unhandled io return value perf_counter tools: Add alias for 'l1d' and 'l1i' perf-report: Add bare minimum PERF_EVENT_READ parsing perf-report: Add modes for inherited stats and no-samples ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: Add Fenghua Yu as temporary co-maintainer for ia64 [IA64] address compiler warnings perfmon.c/salinfo.c [IA64] Remove unnecessary semicolons [IA64] sprintf should not be used with same source & destination address
-
David Howells authored
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by:
-
Wolfgang Illmeyer authored
Maximum file size for hostfs mounts defaults to 2GB, so bigger files cannot be read/written through hostfs. This patch initializes the maximum file size to MAX_LFS_SIZE. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13531Signed-off-by:
Wolfgang Illmeyer <wolfgang@illmeyer.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
A crappy macro prevents us unlocking on a fail path. Expand the macro and unlock appropriatelly. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Frysinger authored
Make sure we do not actually request the RTC IRQ until the device driver is fully ready to handle and process any interrupt. This way a spurious interrupt won't crash the system (which may happen if the bootloader was poking the RTC right before booting Linux). Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Ville Syrjala authored
Block writes require 64 byte alignment. Since block writes could be used with SGRAM or WRAM also refine the memory type detection to check for either type before deciding to use the 64 byte alignment. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Tested-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ville Syrjala authored
Apparently HP OmniBook 500's BIOS doesn't like the way atyfb reprograms the hardware. The BIOS will simply hang after a reboot. Fix the problem by restoring the hardware to it's original state on reboot. Signed-off-by:
-
