- 07 Sep, 2005 40 commits
-
-
Dmitry Torokhov authored
IRDA: smsc-ircc2 - remove home-grown DIM macro, use ARRAY_SIZE intead. Also fix out-of-bound array access. Signed-off-by:Dmitry Torokhov <dtor@mail.ru> Cc: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
IRDA: smsc-ircc2 - some formatting changes for better readability. Signed-off-by:
-
Dmitry Torokhov authored
IRDA: smsc-ircc2 - whitespace fixes. Signed-off-by:
-
Jan Kara authored
attached patch should fix the following race: Proc 1 Proc 2 __flush_batch() ll_rw_block() do_get_write_access() lock_buffer jh is only waiting for checkpoint -> b_transaction == NULL -> do nothing unlock_buffer test_set_buffer_locked() test_clear_buffer_dirty() __journal_file_buffer() change the data submit_bh() and we have sent wrong data to disk... We now clean the dirty buffer flag under buffer lock in all cases and hence we know that whenever a buffer is starting to be journaled we either finish the pending write-out before attaching a buffer to a transaction or we won't write the buffer until the transaction is going to be committed. The test in jbd_unexpected_dirty_buffer() is redundant - remove it. Furthermore we have to clear the buffer dirty bit under the buffer lock to prevent races with buffer write-out (and hence prevent returning a buffer with IO happening). Signed-off-by:Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
Use block layer predefined function. Signed-off-by:
-
Jan Kara authored
We need to be sure that current data are sent to disk. Hence we call ll_rw_block() with SWRITE. Signed-off-by:
-
Jan Kara authored
We need to be sure that current data in buffer are sent to disk. Hence we need to call ll_rw_block() with SWRITE. Signed-off-by:
-
Jan Kara authored
We must be sure that the current data in buffer are sent to disk. Hence we have to call ll_rw_block() with SWRITE. Signed-off-by:
-
Jan Kara authored
Introduce new ll_rw_block() operation SWRITE meaning that block layer should wait for the buffer lock and write-out afterwards. Hence data in buffers at the time of call are guaranteed to be submitted to the disk. Signed-off-by:
-
Jan Kara authored
Fix race between journal_commit_transaction() and other places as journal_unmap_buffer() that are adding buffers to transaction's t_forget list. We have to protect against such places by holding j_list_lock even when traversing the t_forget list. The fact that other places can only add buffers to the list makes the locking easier. OTOH the lock ranking complicates the stuff... Signed-off-by:
-
Mark Fasheh authored
It seems that kjournald() may be missing a check of the JFS_UNMOUNT flag before calling schedule(). This showed up in testing of OCFS2 recovery where our recovery thread would hang in journal_kill_thread() called from journal_destroy() because kjournald never got a chance to read the flag to shut down before the schedule(). Zach pointed out the missing check which led me to hack up this trivial patch. It's been tested many times now and I have yet to reproduce the hang, which was happening very regularly before. <mild rant> I'm guessing that we could really use some wait_event() calls with helper functions in, well, most of jbd these days which would make a ton of the wait code there vastly cleaner. </mild rant> As for why this doesn't happen in ext3 (or OCFS2 during normal mount/unmount of the local nodes journal), I think it may that the specific timing of events in the ocfs2 recovery thread exposes a race there. Because ocfs2_replay_journal() is only interested in playing back the journal, initialization and shutdown happen very quicky with no other metadata put into that specific journal. Acked-by:
"Stephen C. Tweedie" <sct@redhat.com> Signed-off-by:
-
Richard Purdie authored
Add MMC/SD write protection switch handling for the Corgi platform Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Richard Purdie authored
Add keyboard and touchscreen device definitions for corgi. Signed-off-by:
-
Richard Purdie authored
The corgi keyboard has need of a switch event type with slightly type to the input system as recommended by the input maintainer. Signed-off-by:
-
Richard Purdie authored
This patch moves the platform specific Sharp SL-C7x0 LCD code from the w100fb driver into a more appropriate place and updates the Corgi code to match the new w100fb driver. It also updates the corgi touchscreen code to match the new simplified interface available from w100fb. Signed-off-by:
-
Richard Purdie authored
The code w100fb was based on was horribly Sharp SL-C7x0 specific and there was little else that could be done as I had no access to anything else with a w100 in it. There is no real documentation about this chipset available. Ian Molton has access to other platforms with the w100 (Toshiba e-series) and so between us, we've improved w100fb and made it platform independent. Ian Molton also added support for the very similar w3220 and w3200 chipsets. There are a lot of changes here and it nearly amounts to a rewrite of the driver but it has been extensively tested and is being used in preference to the original driver in the Zaurus community. I'd therefore like to update the mainline code to reflect this. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Richard Purdie authored
Corgi Touchscreen bugfix. If the PMU isn't running, the register needs to be set to a sane value rather than reusing some random value. Signed-off-by:
-
Richard Purdie authored
Clean up some Corgi Touchscreen logic and merge the repeat calls to w100fb_blanking() in anticipation of the w100fb patch. Fix a pm_message_t reference. Signed-off-by:
-
Richard Purdie authored
The Corgi Touchscreen driver uses the PMU as an accurate timing source which conflicts with its usage for performance monitoring. This patch allows it to be shared with other users such as oprofile. Signed-off-by:
-
Richard Purdie authored
The input system handles key state tracking so there's no need for the driver to do so as well. Also tidy up some comment formatting and remove a now unneeded function. Signed-off-by:
-
Richard Purdie authored
Add some power management code to the corgi keyboard driver so that only one power event gets reported within any reasonable time frame and the driver doesn't enter an infinte loop due to key repeat. Signed-off-by:
-
Richard Purdie authored
Fix a couple of compile errors in the corgi keyboard driver. Signed-off-by:
-
Pierre Ossman authored
Only show the scr file in sysfs for SD cards. Previously this was present for all cards but had a contents of 0 for MMC cards. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
-
Pierre Ossman authored
Add support for Secure Digital specific features in the wbsd driver. Adds support for read-only switch and wide bus transfers. Signed-off-by:
-
Richard Purdie authored
Add a write protection switch handling code to the PXA MMC driver so that platform specific code can provide it if available. Signed-off-by:
-
Pierre Ossman authored
Credit where credit is due. Signed-off-by:
-
Pierre Ossman authored
Infrastructure for 4-bit bus transfers with SD cards. Signed-off-by:
-
Pierre Ossman authored
Export the SCR register through sysfs. Signed-off-by:
-
Pierre Ossman authored
Read the SD specific SCR register from the card. Signed-off-by:
-
Pierre Ossman authored
Support for the read-only switch on SD cards which must be enforced by the host. Signed-off-by:
-
Pierre Ossman authored
Support for the Secure Digital protocol in the MMC layer. A summary of the legal issues surrounding SD cards, as understood by yours truly: Members of the Secure Digital Association, hereafter SDA, are required to sign a NDA[1] before given access to any specifications. It has been speculated that including an SD implementation would forbid these members to redistribute Linux. This is the basic problem with SD support so it is unclear if it even is a problem since it has no effect on those of us that aren't members. The SDA doesn't seem to enforce these rules though since the patches included here are based on documentation made public by some of the members. The most complete specs[2] are actually released by Sandisk, one of the founding companies of the SDA. Because of this the NDA is considered a non-issue by most involved in the discussions concerning these patches. It might be that the SDA is only interested in protecting the so called "secure" bits of SD, which so far hasn't been found in any public spec. (The card is split into two sections, one "normal" and one "secure" which has an access scheme similar to TPM:s). (As a side note, Microsoft is working to make things easier for us since they want to be able to include the source code for a SD driver in one of their development kits. HP is making sure that the new NDA will allow a Linux implementation. So far only the SDIO specs have been opened up[3]. More will hopefully follow.) [1] http://www.sdcard.org/membership/images/ippolicy.pdf [2] http://www.sandisk.com/pdf/oem/ProdManualSDCardv1.9.pdf [3] http://www.sdcard.org/sdio/Simplified%20SDIO%20Card%20Specification.pdf This patch contains the central parts of the SD support. If no MMC cards are found on a bus then the MMC layer proceeds looking for SD cards. Helper functions are extended to handle the special needs of SD cards. Signed-off-by:
-
Roman Zippel authored
This adds NLS support to HFS. Using the kernel options iocharset and codepage it's possible to map the disk encoding to a local mapping. If these options are not used, it falls back to the old direct mapping. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
This adds support for show_options. It also fixes some namespace polution in the hfsplus driver. Signed-off-by:
-
Roman Zippel authored
This removes some old debug code, which is no longer needed. Signed-off-by:
-
Corey Minyard authored
The IPMI power control function proc_write_chassctrl was badly written, it directly used userspace pointers, it assumed that strings were NULL terminated, and it used the evil sscanf function. This converts over to using the sysctl interface for this data and changes the semantics to be a little more logical. Signed-off-by:
Corey Minyard <minyard@acm.org> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Corey Minyard authored
This removes the unused "all_cmd_rcvr" variable from the IPMI driver. Signed-off-by:
-
Corey Minyard authored
Clean up various style issues in the IPMI driver. Should be no functional changes. Signed-off-by:
-
Corey Minyard authored
This patch allows Dell servers with IPMI controllers that predate IPMI 1.5 to use the standard poweroff or powercycle commands. These systems firmware don't set the chassis capability bit in the Get Device ID, but they do implement the standard poweroff and powercycle commands. Tested on RHEL3 kernel 2.4.21-20.ELsmp on a PowerEdge 2600. The standard ipmi_poweroff driver cannot drive these systems. With this patch, they power off or powercycle as expected. Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
Corey Minyard authored
The "null message handler" in the IPMI driver is used in startup and panic situations to handle messages. It was only designed to work with messages from the local management controller, but in some cases it was used to get messages from remote managmenet controllers, and the system would then panic. This patch makes the "null message handler" in the IPMI driver more general so it works with any kind of message. Signed-off-by:
-
Corey Minyard authored
This adds MODULE_VERSION, MODULE_DESCRIPTION, and MODULE_AUTHOR tags to the IPMI driver modules. Also changes the MODULE_VERSION to remove the prepended 'v' on each value, consistent with the module versioning policy. This patch also removes all the version information from everything except the ipmi_msghandler module. Signed-off-by:
-
