Commits · a7144a9c4af06fbde09f13334098bce415a86a46 · linux / linux-davinci

25 May, 2007 38 commits

omap2: add OMAP2_PRM_BASE/OMAP2_CM_BASE #defines · a7144a9c

Paul Walmsley authored May 03, 2007

Add symbolic constants for OMAP2_PRM_BASE and OMAP2_CM_BASE addresses.
On the 2420 and 2430 these are the same, but on later OMAP
architectures, they are different.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

a7144a9c

omap2: add OMAP24XX register bit defines shared between CM and PRM · fb362141

Paul Walmsley authored May 03, 2007

Add OMAP24XX register bit defines that are shared between the Clock
Management and Power/Reset Management registers.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

fb362141

omap2: add OMAP24XX and OMAP2/3 modules to prcm_common.h · 61234a70

Paul Walmsley authored May 03, 2007

Add 24XX-specific module offset defines to prcm_common.h.  Also add
module offsets that are shared between OMAP2/3.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

61234a70

omap2: remove SDRC register defines from prcm-regs.h · 31016a89

Paul Walmsley authored May 08, 2007

Remove SDRC registers from prcm-regs.h, since they are now located in
sdrc.h.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

31016a89

omap2: convert existing SDRC register users to use sdrc.h · db4189e5

Paul Walmsley authored May 08, 2007

Convert files that use SDRC registers in mach-omap2/ to use sdrc.h
symbolic constants and sdrc_{read,write}_reg().
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

db4189e5

omap2: add SDRC register defines · 987406ff

Paul Walmsley authored May 03, 2007

Create sdrc.h, containing symbolic constants for SDRC registers and
sdrc_{read,write}_reg() to read and write those registers.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

987406ff

omap2: use OMAP2_CTRL_BASE in place of OMAP24XX_CTRL_BASE · ad70431f

Paul Walmsley authored May 16, 2007

Change users of OMAP24XX_CTRL_BASE to use OMAP2_CTRL_BASE.  Remove the
OMAP24XX_CTRL_BASE define.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ad70431f

omap2: use OMAP2_SDRC_BASE in place of OMAP24XX_SDRC_BASE · f9759f10

Paul Walmsley authored May 03, 2007

Change users of OMAP24XX_SDRC_BASE to use OMAP2_SDRC_BASE.  Remove the
OMAP24XX_SDRC_BASE define.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

f9759f10

omap2: use OMAP2_PRCM_BASE in place of OMAP24XX_PRCM_BASE · 78bb3e57

Paul Walmsley authored May 03, 2007

Change users of OMAP24XX_PRCM_BASE to use OMAP2_PRCM_BASE.  Remove
the OMAP24XX_PRCM_BASE define.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

78bb3e57

omap2: use OMAP2_32KSYNCT_BASE in place of OMAP24XX_32KSYNCT_BASE · 57b9d7f3

Paul Walmsley authored May 03, 2007

Change users of OMAP24XX_32KSYNCT_BASE to use OMAP2_32KSYNCT_BASE, in
preparation to remove OMAP24XX_32KSYNCT_BASE.  Convert the 32K sync timer
reference in pm.c to use a symbolic constant rather than a magic number.
Remove the OMAP24XX_32KSYNCT_BASE define.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

57b9d7f3

omap2: modify omap24xx.h to improve constant names and prepare for multi-arch kernels · efbeb3ef

Paul Walmsley authored May 03, 2007

Redo the defines in omap24xx.h to fix poorly-named defines, such as
OMAP24XX_SDRC_BASE, which is different between 2420 and 2430.  Also,
prepare for future multi-architecture kernels by removing the
architecture prefixes from several of the defines.  (Presumably in the
future these will be assigned to 'static void __iomem *'s by runtime
init code depending on the CPU type.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

efbeb3ef

ARM: OMAP: 2430SDP: Use ads7846 for touchscreen driver · 0bb239c1

Kevin Hilman authored May 24, 2007

Removes the tsc2046 specific driver, and changes the 2430SDP platform
code to use the ads7846 instead.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

0bb239c1

omap2_mcspi fixes + cleanups · 7fc39f1f

David Brownell authored May 23, 2007

McSPI functional updates:

 - Implement the spi_transfer.delay_usecs mechanism (previously omitted).

 - Remove strange per-device <asm/arch/mcspi.h> hookery ... it's not even
   correct as a per-device config.  We *always* want "single channel" mode
   (in "keep chipselect active" mode); and if we used "turbo", it would
   be a per-transfer option (as an rx-only double buffering tweak).

 - When enabling/disabling a channel, old value is irrelevant; don't read.

 - Sanity check spi->mode bits, and reject ones we don't support.

 - Streamline DMA channel selection:  do it once during probe(), using static
   tables; smaller, faster.  OMAP 2430 still needs changes here, minimally for
   the third SPI controller.  (Board init should change too, to not assume
   all SPI controllers are used on every board...)

 - Remove #ifdefs around doing reset on driver startup ... enable clocks
   so we can do that (!), and turn on auto-idle.

 - Waste less time enabling/disabling the clocks while working the queue.

 - Flag DMA channels as freed when we do so ... so they can't get reused
   later (when another driver may own them).

 - Minor PIO fix: don't need to verify TX side completed except for TX_ONLY
   mode, since RX completed implies TX completed.

 - Remove bogus code which always dropped chipselect after the last RX_ONLY
   word (rather than leaving it enabled).

 - Move error checks out of work loop into setup() and transfer(), so that
   they're reported ASAP rather than as mysterious transfer errors).

Plus a handful of cleanups:  whitespace fixes, comments.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

7fc39f1f

omap2_mcspi fixes + cleanups · fb20311f

David Brownell authored May 23, 2007

Initial updates for McSPI driver:

 - bug fixes:
    * handle byte-wide tx pio correctly for multiple bytes
    * cleanup workqueue on module exit
    * allow modular build (and rmmod)
    * request_mem_region
    * remove wrongly exported driver symbol

 - cleanup:
    * remove needless debug strings from object file
    * remove needless init and exit sections from object file
    * remove superfluous get/put of spi_master
    * fix whitespace and indentation bugs
    * fix line-too-long bugs
    * use spi_master_*() calls not class_*() calls
    * use dev_*() messaging not printk

Combined with the next patch, this gives around a 10% shrink to the driver
footprint, improves correctness, and helps it get ready to merge upstream.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

fb20311f

lcd_mipid kconfig fixes · b06feca3

David Brownell authored May 22, 2007

Fixes some Kconfig glitches with lcd_mipid.c ... I suspect this
driver should use SPI_MODE_0 now (but, no specs so I can't know).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

b06feca3

tsc2102-alsa build fixes · dc4a1626

David Brownell authored May 22, 2007

Various fixes needed to build the tsc2102 audio.  Several fixes
relate specifically to building it as a module.

Note that this doesn't address the need for omap-alsa-dma.c
to go into a separate module so that e.g. tsc2101 and tsc2102
modules can both be built, or the assumption that the audio
is going out over McBSP not EAC.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

dc4a1626

tsc2101-alsa build fixes · 24c5d1ff

David Brownell authored May 22, 2007

Partial build fixes for tsc2101 audio.  It still won't link though,
it needs undefined omap_tsc2101_{read,write}() functions to access
chip registers ... and requires that e.g. tsc2102 audio isn't also
configured (they use the same exported McBSP DMA functions, which
likewise prevent use with EAC).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

24c5d1ff

fix SPI_CPHA related errors · 6e10bf63

David Brownell authored May 24, 2007

The OMAP SPI controller drivers handle SPI_CPHA incorrectly.
It should mean:

  CPHA=0 ... sample at leading edge of clock
  CPHA=1 ... sample at trailing edge of clock

This fixes them, and the protocol drivers which depended on the wrong
meaning.  Separate ads7846 and omap_uwire patches are going upstream,
already since those drivers were already pushed there.  The tsc2102
code already had this right ... strange.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Kevin Hilman <khilman@mvista.com>

6e10bf63

Re-add a lost TSC2102 touchscreen Kconfig entry · cafb944d

andrzej zaborowski authored May 22, 2007

The TSC2102 option in drivers/input/touchscreen/Kconfig got lost
somewhere in January (although the commit is not visible in git-web),
so adding it back.  Also remove the input_dev.dev assignment due to an
upstream change.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>

From 492e5cbe39613f06b8146c12bff9500259739fd5 Mon Sep 17 00:00:00 2001
From: Andrzej Zaborowski <balrog@zabor.org>
Date: Tue, 22 May 2007 20:08:47 +0200
Subject: [PATCH] Re-add a lost TSC2102 touchscreen Kconfig entry.

The TSC2102 option in drivers/input/touchscreen/Kconfig got lost somewhere
in January (although the commit is not visible in git-web), so adding it
back.  Also remove the input_dev.dev assignment due to an upstream change.
Signed-off-by: Tony Lindgren <tony@atomide.com>

cafb944d

Update the Kconfig entry for omap-bl · 00bc7eb7

andrzej zaborowski authored May 22, 2007

 - CONFIG_BACKLIGHT_DEVICE now became CONFIG_BACKLIGHT_CLASS_DEVICE.
 - Re-add OMAPBL_MAX_INTENSITY usage that was removed in last commit
and the macro became unused.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>

From feb798039e5c6e06f64556ad482dbbd021153a1b Mon Sep 17 00:00:00 2001
From: Andrzej Zaborowski <balrog@zabor.org>
Date: Tue, 22 May 2007 19:59:11 +0200
Subject: [PATCH] OMAP: Update omap-bl Kconfig entry.

 - CONFIG_BACKLIGHT_DEVICE is now CONFIG_BACKLIGHT_CLASS_DEVICE.
 - Re-add OMAPBL_MAX_INTENSITY usage that became unused after last commit.
Signed-off-by: Tony Lindgren <tony@atomide.com>

00bc7eb7

ARM: OMAP: Fix section mismatch in OMAP2 board-generic.c · 2a3099d6

Dirk Behme authored May 20, 2007

Fix section mismatch in OMAP2 board-generic.c
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

2a3099d6

ARM: OMAP: Fix section mismatch in OMAP1 board-generic.c · 8e45402f

Dirk Behme authored May 20, 2007

Fix section mismatch in OMAP1 board-generic.c
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

8e45402f

ARM: OMAP: Fix section mismatch in board-2430sdp.c · f4d33f16

Dirk Behme authored May 20, 2007

Fix section mismatch in board-2430sdp.c
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

f4d33f16

ARM: OMAP: Fix section mismatch in board-palmz71.c · 33828afb