- 15 Sep, 2009 3 commits
-
-
Mauro Carvalho Chehab authored
/home/v4l/master/v4l/cx25821-audups11.c:99: error: implicit declaration of function 'lock_kernel' /home/v4l/master/v4l/cx25821-audups11.c:112: error: implicit declaration of function 'unlock_kernel' Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
GIT_BRANCH=devel GIT_AUTHOR_DATE=1252851239 GIT_AUTHOR_NAME=Palash Bandyopadhyay GIT_AUTHOR_EMAIL=Palash.Bandyopadhyay@conexant.com Add conexant cx25821 driver release v106 of the Athena driver. Signed-off-by: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Douglas Schilling Landgraf authored
Added Kworld DVD Maker 2 Thanks to C Western <l@c-m-w.me.uk> for reporting this board. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 Sep, 2009 37 commits
-
-
Mauro Carvalho Chehab authored
There are some extra parenthesis at the clauses, and some switch() tests for boards that don't have i2c ir. Remove those extra code. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Currently, the logic to load ir i2c ancillary module is broken. It is associated to Hauppauge devices with IR flag on their eeprom, no matter if the device uses i2c or em28xx direct IR support. That's wrong. Instead, add a flag to the boards that use i2c IR chips and load the module only for those devices and if ir is not disabled. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers, Dustin Mitchell, Andy Walls and Jean Delvare to rise this question. Before this patch, if ir-kbd-i2c were probed after SAA7134, trash data were used. Compile tested only, but the patch is identical to em28xx one. So, it should work properly. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andy Walls authored
ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers for pointing out a solution, and Dustin Mitchell for testing against a 2.6.30 kernel. Reported-by: Dustin Mitchell <soxslayer@gmail.com> Reported-by: Brian Rogers <brian@xyzw.org> Tested-by: Dustin Mitchell <soxslayer@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers, Dustin Mitchell, Andy Walls and Jean Delvare to rise this question. Before this patch, if ir-kbd-i2c were probed after em28xx, trash data were used. After the patch, no matter what order, it is properly reported as tested by me: input: i2c IR (i2c IR (EM2840 Hauppaug as /class/input/input10 ir-kbd-i2c: i2c IR (i2c IR (EM2840 Hauppaug detected at i2c-4/4-0030/ir0 [em28xx #0] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Brian Johnson authored
Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Brian Johnson authored
Using the MT9M111's IFP to handle exposure/gain gives better results. Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Brian Johnson authored
Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Joe Perches authored
Use s16 instead of int where possible. Use struct instead of arrays Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Brian Johnson authored
Fixes broken exposure on SOI968 webcams that was causing the camera to display a black screen Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Let 0c45:60fc in sn9c102 and 0c45:613e in gspca-sonixj (sensor not supported). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
The new exchanges are taken from the information file of the ms-win driver (usbvm326.inf - webcam 15b8:6002). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Stephane Marguet (Stemp) authored
Signed-off-by: Stephane Marguet (Stemp) <smarguet@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Janne Grunau authored
Check the modulation in dvb_frontend_check_parameters against frontend's capabilties for FE_QAM devices. Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Janne Grunau authored
Various frontend driver have parameter checks in their set_frontend functions and return an error if the parameters are not supported, tda10021 and cx24116 to name two. The tuning ioctls FE_SET_FRONTEND/FE_SET_PROPERTY only change values in the property cache and return before set_frontend is called. If a set_frontend call in software zigzag algorithm fails and the card was previously locked it will report a lock and the new parameters but is still tuned to the old transport. This is not detectable from userspace. This change checks the return values of fe->ops.set_frontend and changes the state to the added FESTATE_ERROR for software zigzag. No lock will be reported to userspace if the State is FESTATE_ERROR. Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Janne Grunau authored
Support for more than 8 DVB devices is requested regularly so make it a kconfig variable instead of a header define. Values in the range 4-32 are tested. Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_mr97310a: Add one more vivitar mini cam to the list of CIF cams Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_mr97310a: Allow overriding of detected sensor type Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
V4L2_FMT_FLAG_EMULATED 0x0002 This format is not native to the device but emulated through software (usually libv4l2), where possible try to use a native format instead for better performance. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_mr97310a: Use correct register for CIF type 1 sensor gain settings Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_mr97310a: Add controls for CIF type 0 sensor cams Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_mr97310a: make the probing a bit less chatty Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_mr97310a: Move detection of CIF sensor type to probe() function, so that the right controls are set to disabled from the start, rather then having them disappear all of a sudden when the stream is started. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_mr97310a: cleanup/fixup control handling Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca: mr97310a fix detection of sensortype for vivicam with id byte of 0x53 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Theodore Kilgore authored
This patch adds supports for mr97310a camera's with CIF sensors (2 different types) and for VGA mr97310a camera with a different sensor then supported until now. This patch also add support for controls for one of the 2 CIF sensors, this was written by Thomas Kaiser <thomas@kaiser-linux.li> Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Thomas Kaiser <thomas@kaiser-linux.li> Signed-off-by: Hans de Goede <hdgoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Now that we've figured out the higher compression settings (supported in libv4l-0.6.0 and later, so after this patch the driver should be used with libv4l-0.6.0 or higher only!), we can enable higher framerates. Which means lower exposure times, which is important for the use of the pac207 in full daylight. This patch also tweakes the brightness default and the per color gain balances to use the values which are adviced by Pixart in the pac207 application note. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_pac207: remove a number of unneeded (repeated) register writes Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Depending on the model there are three different firmwares to choose from. Unfortunately if a cx23885 is loaded first, then the global firmware name is overwritten with that firmware and if ivtv is loaded next, then it tries to load the wrong firmware. In addition, the original approach would also overwrite any firmware that the user specified explicitly. Cc: Jarod Wilson <jarod@wilsonet.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The compiler warned about an uninitialized stereo variable. By simplifying the code it 1) improved readability and 2) fixed the compiler warning. Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
The input subsystem checks if get_keycode works for a scan code. Due to that, we need to return a valid value when there's some space at the table that can be used by a scancode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Implements handler for EVIOCGKEYCODE/EVIOCSKEYCODE via adding two new callbacks to the input device. Since on dvb-usb a scan code has 16 bits, to fulfill rc5 standard codes, the default getkeycode/setkeycode input methods would require the driver to spend up to 64 Kb of a sparse table. Instead, add two new callbacks to the event device. With this, it is now possible to replace the keycode tables. There are, however, a few implementation details at the current patch: 1) It will replace the existing device keytable, instead of creating an instance of the data. This works. However, if two devices pointing to the same table were connected, changing the IR table of one will also change the IR table for the other (the solution for this one is simple: just kmalloc some memory); 2) In order to change the scan code, you need first to change the key to KEY_RESERVED or KEY_UNKNOWN to free some space at the table (solution: allocate some additional space for newer scan codes or allow dynamic table grow); 3) The table size cannot be extended. It would be easy to allow the table to grow dynamically: just calling kmalloc(size+1); kfree(old). Yet, maybe we can just create a bigger table with a fixed size, like for example a table with 128 entries. This should be enough even for a very big IR. The current issues should be addressed on a later patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
In order to be closer to V4L IR implementation, it is needed to replace u8 custom, data to: u16 scan This allows using non-rc5 mappings, like the 8 bit keycodes used on older protocols. It will also allow future implementations of rc6 keystrokes when needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-