- 10 Jul, 2006 40 commits
-
-
Benjamin Herrenschmidt authored
This patch cleans up the printk's in the layout fabric and also makes it display which type of GPIO access it is going to use. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
This patch makes the pmf GPIO layer in aoa report if calling a platform function failed. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch revamps the i2sbus control layer by using the macio/keylargo functions instead of directly mapping. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch fixes initialisation issues when all of aoa is built into the kernel by re-ordering the link order in the Makefile and making the soundbus use subsys_initcall so it is initialised earlier. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch cleans up the resource handling in i2sbus and adds workarounds for the broken device trees on the PowerMac7,2 and 7,3. Some of this code will later move again when macio_asic is going to export all the sub-nodes too. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch moves the i2sbus 'force' module parameter declaration to the top of the file. Signed-off-by:
-
Andreas Schwab authored
Use proper irq mapping interface for snd-aoa-i2sbus. Signed-off-by:
Andreas Schwab <schwab@suse.de> Acked-by:
-
Roman Zippel authored
A large number of lost ticks can cause an overadjustment of the clock. To compensate for this we look at the current error and the larger the error already is the more careful we are at adjusting the error. As small extra fix reset the error when the clock is set. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Acked-by:
john stultz <johnstul@us.ibm.com> Cc: Uwe Bugla <uwe.bugla@gmx.de> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
Heiko Carstens authored
Add missing EXPORT_SYMBOL for all_vm_events(). Git commit f8891e5e caused this: Building modules, stage 2. MODPOST WARNING: "all_vm_events" [arch/s390/appldata/appldata_mem.ko] undefined! CC arch/s390/appldata/appldata_mem.mod.o Cc: Christoph Lameter <christoph@lameter.com> Cc: Gerald Schaefer <geraldsc@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Christoph Lameter authored
It turns out that there is a way to build a kernel with NUMA and no SMP. In that case we are missing one definition __inc_zone_state. Provide that missing __inc_zone_state. (akpm: NUMA && !SMP sounds odd, but I am told "But there is the concept of cpuless nodes. A NUMA system without SMP has a single processor but multiple memory nodes. This used to work before on IA64 (wasn't aware of it, never seen anyone with this kind of thing).") Acked-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Thomas Gleixner authored
Calling futex_lock_pi is called with a reference to a non PI futex and waiters exist already, lookup_pi_state() oopses due to pi_state == NULL. Check this condition and return -EINVAL to userspace. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
-
Konstantin Karasyov authored
Daniel Ritz <daniel.ritz-ml@swissonline.ch> says: The acpi driver suspend/resume patches that went in recently caused a regression on my box (toshiba tecra 8000 laptop): after resume from swsusp the fan turns on keeping blowing cold air out of my notebook. before the patches, the fan was off and would only make noise when required. it's the same thing described in bugzilla.kernel.org #5000. the acpi suspend/resume patches or at least parts of them originate in this bug. now the last patch in the report (attach id 8438) actually fixes the problem - for me and the reporter. this is a trimmed down version of that patch. Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: Len Brown <len.brown@intel.com> Cc: Sanjoy Mahajan <sanjoy@mrao.cam.ac.uk> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Yoshinori Sato authored
Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Adrian Bunk authored
This patch marks an unused export as EXPORT_UNUSED_SYMBOL. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
This patch marks an unused export as EXPORT_UNUSED_SYMBOL. Signed-off-by:
-
Adrian Bunk authored
This patch marks three unused exports as EXPORT_UNUSED_SYMBOL. Signed-off-by:
-
Adrian Bunk authored
This patch marks an unused export as EXPORT_UNUSED_SYMBOL. Signed-off-by:
-
Adrian Bunk authored
This patch marks an unused export as EXPORT_UNUSED_SYMBOL. Signed-off-by:
-
Adrian Bunk authored
This patch marks unused exports as EXPORT_SYMBOL_UNUSED. Signed-off-by:
-
Andrew Morton authored
During early MD setup (superblock reading), we don't have a personality yet. But the error-handling code tries to dereference mddev->pers. Fix. Acked-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
This is generally useful, but particularly helps see if it is the same sector that always needs correcting, or different ones. [akpm@osdl.org: fix printk warnings] Signed-off-by:
-
NeilBrown authored
The ioctl requires CAP_SYS_ADMIN, so sysfs should too. Note that we don't require CAP_SYS_ADMIN for reading attributes even though the ioctl does. There is no reason to limit the read access, and much of the information is already available via /proc/mdstat Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
NeilBrown authored
Some places we use number (0660) someplaces names (S_IRUGO). Change all numbers to be names, and change 0655 to be what it should be. Also make some formatting more consistent. Signed-off-by:
-
NeilBrown authored
Though it rarely matters, we should be using 's' rather than r1_bio->sector here. Signed-off-by:
-
NeilBrown authored
The comment gives more details, but I didn't quite have the sequencing write, so there was room for races to leave bits unset in the on-disk bitmap for short periods of time. Signed-off-by:
-
NeilBrown authored
When a device is unplugged, requests are moved from one or two (depending on whether a bitmap is in use) queues to the main request queue. So whenever requests are put on either of those queues, we should make sure the raid5 array is 'plugged'. However we don't. We currently plug the raid5 queue just before putting requests on queues, so there is room for a race. If something unplugs the queue at just the wrong time, requests will be left on the queue and nothing will want to unplug them. Normally something else will plug and unplug the queue fairly soon, but there is a risk that nothing will. Signed-off-by:
-
NeilBrown authored
We introduced 'io_sectors' recently so we could count the sectors that causes io during resync separate from sectors which didn't cause IO - there can be a difference if a bitmap is being used to accelerate resync. However when a speed is reported, we find the number of sectors processed recently by subtracting an oldish io_sectors count from a current 'curr_resync' count. This is wrong because curr_resync counts all sectors, not just io sectors. So, add a field to mddev to store the curren io_sectors separately from curr_resync, and use that in the calculations. Signed-off-by:
-
NeilBrown authored
When an array is started we start one or two threads (two if there is a reshape or recovery that needs to be completed). We currently start these *before* the array is completely set up and in particular before queue->queuedata is set. If the thread actually starts very quickly on another CPU, we can end up dereferencing queue->queuedata and oops. This patch also makes sure we don't try to start a recovery if a reshape is being restarted. Signed-off-by:
-
NeilBrown authored
This has to be done in ->load_super, not ->validate_super Without this, hot-adding devices to an array doesn't always work right - though there is a work around in mdadm-2.5.2 to make this less of an issue. Signed-off-by:
-
NeilBrown authored
I have reports of a problem with raid5 which turns out to be because the raid5 device gets stuck in a 'plugged' state. This shouldn't be able to happen as 3msec after it gets plugged it should get unplugged. However it happens none-the-less. This patch fixes the problem and is a reasonable thing to do, though it might hurt performance slightly in some cases. Until I can find the real problem, we should probably have this workaround in place. Signed-off-by:
-
Jon Smirl authored
screen_info.h doesn't have anything to do with the tty layer and shouldn't be included by tty.h. This patches removes the include and modifies all users to directly include screen_info.h. struct screen_info is mainly used to communicate with the console drivers in drivers/video/console. Note that this patch touches every arch and I have no way of testing it. If there is a mistake the worst thing that will happen is a compile error. [akpm@osdl.org: fix arm build] [akpm@osdl.org: fix alpha build] Signed-off-by:
Jon Smirl <jonsmir@gmail.com> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Jon Smirl authored
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by:
-
Karsten Keil authored
Fix the warnings about the section mismatches for __init* in the HiSax driver. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Updates my personal entry in the CREDITS file. Signed-off-by:
Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Magnus Damm authored
Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. Signed-off-by:
Magnus Damm <magnus@valinux.co.jp> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Jens Axboe authored
The code really means to mask off the high bits, not assign 0xff. Signed-off-by:
Jens Axboe <axboe@suse.de> Cc: Marcus Meissner <meissner@suse.de> Cc: <stable@kernel.org> Signed-off-by:
-
Jonathan Corbet authored
As I was looking over the get_sb() changes, I stumbled across a little mistake in the documentation updates. Unless we're getting into an interesting new object-oriented realm, I doubt that get_sb() should really return "struct int"... Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Urs Thuermann authored
Updater should use _rcu variant of list_del(). Signed-off-by:
Urs Thuermann <urs@isnogud.escape.de> Acked-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Arjan van de Ven authored
{un}register_die_notifier() is used by kdb... document this so that future "remove dead export" rounds can skip this export. Signed-off-by:Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Ingo Molnar authored
Clean up lockdep on-stack-completion initializer. (This also removes the dependency on waitqueue_lock_key.) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
