If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it 
should check whether the passed control ID is valid and return 0 if it 
isn't. Otherwise a for-loop over the control IDs will never end.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

When videodev2.h is included by an application, it needs to include
<sys/time.h> for the timeval struct.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The VBI DMA is handled in a special way and is marked with a bit.
However, that bit was set at the wrong time and could be cleared
by mistake if a PCM (or other) DMA request would arrive before the
VBI DMA was completed. So on completion of the VBI DMA the driver
no longer knew that that DMA transfer was for VBI data. And this
in turn caused havoc with the card's DMA engine.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver prints banner including kernel version. Was a leftover from when 
the driver was standalone.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

I2C_ALGOBIT must also be selected when ivtv is selected.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Turn off debugging of API commands that occur during encoding or decoding,
unless they are explicitly requested.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Parse error in ifdef or bad use of macro.
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The comparison with ZERO_SIZE_PTR in ZERO_OR_NULL_PTR() needs to be <=
(not just <) so that ZERO_OR_NULL_PTR(ZERO_SIZE_PTR) is 1.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
[ Duh!  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Prevent people from directly including <asm/rwsem.h>.
  [IA64] remove time interpolator
  [IA64] Convert to generic timekeeping/clocksource
  [IA64] refresh some config files for 64K pagesize
  [IA64] Delete iosapic_free_rte()
  [IA64] fallocate system call
  [IA64] Enable percpu vector domain for IA64_DIG
  [IA64] Enable percpu vector domain for IA64_GENERIC
  [IA64] Support irq migration across domain
  [IA64] Add support for vector domain
  [IA64] Add mapping table between irq and vector
  [IA64] Check if irq is sharable
  [IA64] Fix invalid irq vector assumption for iosapic
  [IA64] Use dynamic irq for iosapic interrupts
  [IA64] Use per iosapic lock for indirect iosapic register access
  [IA64] Cleanup lock order in iosapic_register_intr
  [IA64] Remove duplicated members in iosapic_rte_info
  [IA64] Remove block structure for locking in iosapic.c

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] User stack pointer randomisation
  [MIPS] Remove unused include/asm-mips/gfx.h
  [MIPS] Remove unused include/asm-mips/ds1216.h
  [MIPS] Workaround for RM7000 WAIT instruction aka erratum 38
  [MIPS] Make support for weakly ordered LL/SC a config option.
  [MIPS] Disable UserLocal runtime detection on platforms which never have it.
  [MIPS] Disable MT runtime detection on platforms which never support MT.

Make it possible to use __start_notes and __stop_notes without getting a GPREL
overflow error from the FRV linker.

Small variables that would otherwise be in .data or .bss may, depending on the
arch, be placed in special sections (.sdata or .sbss) that permit single
instruction references on fixed instruction width machines.

__start_notes and __stop_notes aren't really char variables, and certainly
don't refer to data in .data or .bss.  Making them type "void" fools the
compiler into not assuming anything about them.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The same problem that was fixed for tpm_ascii_bios_measurements_open()
in commit 178554ae also occurs in
tpm_binary_bios measurements().  Thanks for noticing this Satyam!

I tested the attached patch to fix tpm_binary_bios_measurments as well.
Signed-off-by: Reiner Sailer <sailer@watson.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Remove time_interpolator code (This is generic code, but
only user was ia64.  It has been superseded by the
CONFIG_GENERIC_TIME code).
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Peter Keilty <peter.keilty@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

This is a merge of Peter Keilty's initial patch (which was
revived by Bob Picco) for this with Hidetoshi Seto's fixes
and scaling improvements.
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

None of weakly ordered processor supported in tree need this but it seems
like this could change ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The kvm mmu uses page->private on shadow page tables; so does slub, and
an oops result.  Fix by allocating regular pages for shadows instead of
using slub.
Tested-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Allow real-mode emulation of rdmsr and wrmsr.  This allows smp Windows to
boot, presumably for its sipi trampoline.
Signed-off-by: Avi Kivity <avi@qumranet.com>

The memory slot management functions were oriented against vcpu 0, where
they should be kvm-wide.  This causes hangs starting X on guest smp.

Fix by making the functions (and resultant tail in the mmu) non-vcpu-specific.
Unfortunately this reduces the efficiency of the mmu object cache a bit.  We
may have to revisit this later.
Signed-off-by: Avi Kivity <avi@qumranet.com>

We need to distinguish between large page shadows which have the nx bit set
and those which don't.  The problem shows up when booting a newer smp Linux
kernel, where the trampoline page (which is in real mode, which uses the
same shadow pages as large pages) is using the same mapping as a kernel data
page, which is mapped using nx, causing kvm to spin on that page.
Signed-off-by: Avi Kivity <avi@qumranet.com>

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/ofcons:
  Create drivers/of/platform.c
  Create linux/of_platorm.h
  [SPARC/64] Rename some functions like PowerPC
  Begin consolidation of of_device.h
  Begin to consolidate of_device.c
  Consolidate of_find_node_by routines
  Consolidate of_get_next_child
  Consolidate of_get_parent
  Consolidate of_find_property
  Consolidate of_device_is_compatible
  Start split out of common open firmware code
  Split out common parts of prom.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: appletouch - improve powersaving for Geyser3 devices
  Input: lifebook - fix an oops on Panasonic CF-18
  Input: document intended meaning of KEY_SWITCHVIDEOMODE
  Input: switch to using seq_list_xxx helpers
  Input: i8042 - give more trust to PNP data on i386
  Input: add driver for Fujitsu serial touchscreens
  Input: ads7846 - re-check pendown status before reporting events
  Input: ads7846 - introduce sample settling delay
  Input: xpad - add support for leds on xbox 360 pad

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linux Torvalds <torvalds@linux-foundation.org>

If add_to_page_cache_lru() fails, the page will not be locked. But
splice jumps to an error path that does a page release and unlock,
causing a BUG() in unlock_page().

Fix this by adding one more label that just releases the page. This bug
was actually triggered on EL5 by gurudas pai <gurudas.pai@oracle.com>
using fio.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>