- 04 Dec, 2006 18 commits
-
-
Heiko Carstens authored
KEXEC_CONTROL_MEMORY_LIMIT is an unsigned long value and therefore should be defined as one. Otherwise the kexec control page can be allocated above 2GB which will cause a specification exception on the sam31 instruction in the s390 kexec relocation code. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
In case of re-IPL and diag308 doesn't work we have to reset all devices manually and wait synchronously that each reset finished. This patch adds the necessary infrastucture and the first exploiter of it. Subsystems that need to add a function that needs to be called at re-IPL may register/unregister this function via struct reset_call { struct reset_call *next; void (*fn)(void); }; void register_reset_call(struct reset_call *reset); void unregister_reset_call(struct reset_call *reset); When the registered function get called the context is: - all cpus beside the current one are stopped - all machine checks and interrupts are disabled - prefixing is disabled - a default machine check handler is available for use The registered functions may not take any locks are sleep. For the common I/O layer part of this patch: Introduce a reset_call css_reset that does the following: - clear all subchannels - perform a rchp on all channel paths and wait for the resulting machine checks This replaces the calls to clear_all_subchannels() and cio_reset_channel_paths() for kexec and ccw reipl. reipl_ccw_dev() now uses reipl_find_schid() to determine the subchannel id for a given device id. Also remove cio_reset_channel_paths() and friends since they are not needed anymore. Signed-off-by:Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Nicolas Kaiser authored
Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
Heiko Carstens authored
segment save will exit with a lock held if the passed segment doesn't exist. Any subsequent call to segment_save will lead to a deadlock. Fix this and give up the lock before returning. Signed-off-by:
-
Horst Hummel authored
Currently the return value of 'dasd_eer_enable' is returned - even if the function returned '0'. Now return 'count' for successful execution. Signed-off-by:
Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by:
-
Horst Hummel authored
In case a request timed out and termination did not work, the console was flooded with retry messages (every 1/10s). Now we use a 5s delay per retry and generate a more precise message. Signed-off-by:
-
Michael Holzheu authored
Since the diag 308 reipl method is superior to the ccw method, we should use it whenever it is possible. We can do that, if the user has not specified a new reipl ccw device and the system has been ipled from a ccw device. Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
Cornelia Huck authored
Signed-off-by:
-
Martin Schwidefsky authored
Remove lock pointer from 3215 device structure. Use get_ccwdev_lock for each use of the lock in the ccw-device structure. Signed-off-by: -
Michael Holzheu authored
If reboot fails (e.g. because wrong devno has been specified by the user), we should just stop all cpus, but should not trigger a kernel panic. Signed-off-by:
-
Heiko Carstens authored
Get rid of our own user_termio_to_kernel_termios() and kernel_termios_to_user_termio() macros which didn't check for errors on user space accesses. Instead use the generic functions which handle this properly. In addition the generic version of user_termio_to_kernel_termios() also copies the c_line member which was missing in our variant. Signed-off-by:
-
Ralph Wuerthner authored
Signed-off-by:
Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by:
-
Michael Holzheu authored
If multiple kernel images are installed on one DASD, the loadparm can be used to select the boot configuration. This patch introduces the following two new sysfs attributes: /sys/firmware/ipl/loadparm: shows loadparm of current system (ro) /sys/firmware/reipl/ccw/loadparm: loadparm used for next reboot (rw) Signed-off-by:
-
Heiko Carstens authored
Follow other architectures and add __must_check to uaccess functions. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Horst Hummel authored
When writing to dasd attributes (e.g. readonly), all values besides '1' are handled like '0'. Other sysfs-attributes like 'online' are checking for '1' and for '0' and do not accept other values. Therefore enhanced checking and error handling in dasd_devmap attribute store functions. Signed-off-by:
-
Christian Borntraeger authored
The SALIPL entry point has an needless memory detection routine as we later check the memory size again. The SALIPL code also uses diagnose 0x060 if we are running under VM, but this diagnose is not compatible with the 64 bit addressing mode. The solution is to get rid of this code and rely on the memory detection in the startup code. Signed-off-by:
Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by:
-
Jeff Garzik authored
It's bitrotten, long unmaintained, long hidden under BROKEN_ON_SMP, etc. As scheduled in feature-removal-schedule.txt, and ack'd several times on lkml. Signed-off-by:Jeff Garzik <jeff@garzik.org>
-
- 03 Dec, 2006 22 commits
-
-
Jamal Hadi Salim authored
aevents can not uniquely identify an SA. We break the ABI with this patch, but consensus is that since it is not yet utilized by any (known) application then it is fine (better do it now than later). Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yasuyuki Kozakai authored
To use ipv6_find_hdr(), IP6_NF_IPTABLES is necessary. Signed-off-by:
Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by:
-
Alexey Dobriyan authored
David Binderman's icc logs: net/rose/rose_route.c(399): remark #593: variable "err" was set but never used Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Yasuyuki Kozakai authored
Signed-off-by:
-
Patrick McHardy authored
- move EXPORT_SYMBOL next to exported symbol - use EXPORT_SYMBOL_GPL since this is what the original code used Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Also remove the references to "new connection tracking" from Kconfig. After some short stabilization period of the new connection tracking helpers/NAT code the old one will be removed. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the SNMP NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the TFTP conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the SIP conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the PPtP conntrack/NAT helper. Since there seems to be no IPv6-capable PPtP implementation the helper only support IPv4. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the NetBIOS name service conntrack helper. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the IRC conntrack/NAT helper. Since DCC doesn't support IPv6 yet, the helper is still IPv4 only. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the H.323 conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the Amanda conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Expectation address masks need to be differently initialized depending on the address family, create helper function to avoid cluttering up the code too much. Signed-off-by:
-
Jozsef Kadlecsik authored
Add FTP NAT helper. Split out from Jozsef's big nf_nat patch with a few small fixes by myself. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Jozsef Kadlecsik authored
Add NAT support for nf_conntrack. Joint work of Jozsef Kadlecsik, Yasuyuki Kozakai, Martin Josefsson and myself. Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Improve the connection tracking selection (well, the user experience, not really the aesthetics) by offering one option to enable connection tracking and a choice between the implementations. Signed-off-by:
-
Patrick McHardy authored
Some helpers (namely H.323) manually assign further helpers to expected connections. This is not possible with nf_conntrack anymore since we need to know whether a helper is used at allocation time. Handle the helper assignment centrally, which allows to perform the correct allocation and as a nice side effect eliminates the need for the H.323 helper to fiddle with nf_conntrack_lock. Mid term the allocation scheme really needs to be redesigned since we do both the helper and expectation lookup _twice_ for every new connection. Signed-off-by:
-
Patrick McHardy authored
Resync with Al Viro's ip_conntrack annotations and fix a missed spot in ip_nat_proto_icmp.c. Signed-off-by:
-
Patrick McHardy authored
Adding the alignment to the size doesn't make any sense, what it should do is align the size of the conntrack structure to the alignment requirements of the helper structure and return an aligned pointer in nfct_help(). Signed-off-by:
-
