- 28 Oct, 2008 35 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: ia64: Makefile fix for forcing to re-generate asm-offsets.h KVM: Future-proof device assignment ABI KVM: ia64: Fix halt emulation logic KVM: Fix guest shared interrupt with in-kernel irqchip KVM: MMU: sync root on paravirt TLB flush
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: fix irqs on/off ip tracing lockdep: minor fix for debug_show_all_locks() x86: restore the old swiotlb alloc_coherent behavior x86: use GFP_DMA for 24bit coherent_dma_mask swiotlb: remove panic for alloc_coherent failure xen: compilation fix of drivers/xen/events.c on IA64 xen: portability clean up and some minor clean up for xencomm.c xen: don't reload cr3 on suspend kernel/resource: fix reserve_region_with_split() section mismatch printk: remove unused code from kernel/printk.c
-
Linus Torvalds authored
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: make variable static
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: fix documentation reference for sched_min_granularity_ns sched: virtual time buddy preemption sched: re-instate vruntime based wakeup preemption sched: weaken sync hint sched: more accurate min_vruntime accounting sched: fix a find_busiest_group buglet sched: add CONFIG_SMP consistency
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, memory hotplug: remove wrong -1 in calling init_memory_mapping() x86: keep the /proc/meminfo page count correct x86/uv: memory allocation at initialization xen: fix Xen domU boot with batched mprotect
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] s390: Fix build for !CONFIG_S390_GUEST + CONFIG_VIRTIO_CONSOLE [S390] No more 4kb stacks. [S390] Change default IPL method to IPL_VM. [S390] tape: disable interrupts in tape_open and tape_release [S390] appldata: unsigned ops->size cannot be negative [S390] tape block: complete request with correct locking [S390] Fix sysdev class file creation. [S390] pgtables: Fix race in enable_sie vs. page table ops [S390] qdio: remove incorrect memset [S390] qdio: prevent double qdio shutdown in case of I/O errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: ahci enclosure management bit mask libata: ahci enclosure management led sync pata_ninja32: suspend/resume support libata: Fix LBA48 on pata_it821x RAID volumes. libata: clear saved xfer_mode and ncq_enabled on device detach sata_sil24: configure max read request size to 4k libata: add missing kernel-doc libata: fix device iteration bugs ahci: Add support for Promise PDC42819 ata: Switch all my stuff to a common address
-
Xiantao Zhang authored
To avoid using stale asm-offsets.h. Signed-off-by:
Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Reserve some space so we can add more data. Signed-off-by:Avi Kivity <avi@qumranet.com>
-
Xiantao Zhang authored
Common halt logic was changed by x86 and did not update ia64. This patch updates halt for ia64. Fixes a regression causing guests to hang with more than 2 vcpus. Signed-off-by:
-
Sheng Yang authored
Every call of kvm_set_irq() should offer an irq_source_id, which is allocated by kvm_request_irq_source_id(). Based on irq_source_id, we identify the irq source and implement logical OR for shared level interrupts. The allocated irq_source_id can be freed by kvm_free_irq_source_id(). Currently, we support at most sizeof(unsigned long) different irq sources. [Amit: - rebase to kvm.git HEAD - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file - move kvm_request_irq_source_id to the update_irq ioctl] [Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests] Signed-off-by:Sheng Yang <sheng@linux.intel.com> Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
The pvmmu TLB flush handler should request a root sync, similarly to a native read-write CR3. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Heiko Carstens authored
Impact: fix lockdep lock-api-caller output when irqsoff tracing is enabled 81d68a96 "ftrace: trace irq disabled critical timings" added wrappers around trace_hardirqs_on/off_caller. However these functions use __builtin_return_address(0) to figure out which function actually disabled or enabled irqs. The result is that we save the ips of trace_hardirqs_on/off instead of the real caller. Not very helpful. However since the patch from Steven the ip already gets passed. So use that and get rid of __builtin_return_address(0) in these two functions. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Christian Borntraeger authored
The s390 kernel does not compile if virtio console is enabled, but guest support is disabled: LD .tmp_vmlinux1 arch/s390/kernel/built-in.o: In function `setup_arch': /space/linux-2.5/arch/s390/kernel/setup.c:773: undefined reference to `s390_virtio_console_init' The fix is related to commit 99e65c92 Author: Christian Borntraeger <borntraeger@de.ibm.com> Date: Fri Jul 25 15:50:04 2008 +0200 KVM: s390: Fix guest kconfig Which changed the build process to build kvm_virtio.c only if CONFIG_S390_GUEST is set. We must ifdef the prototype in the header file accordingly. Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
We got a stack overflow with a small stack configuration on a 32 bit system. It just looks like as 4kb isn't enough and too dangerous. So lets get rid of 4kb stacks on 32 bit. But one thing I completely dislike about the call trace below is that just for debugging or tracing purposes sprintf gets called (cio_start_key): /* process condition code */ sprintf(dbf_txt, "ccode:%d", ccode); CIO_TRACE_EVENT(4, dbf_txt); But maybe its just me who thinks that this could be done better. <4>Kernel stack overflow. <4>Modules linked in: dm_multipath sunrpc bonding qeth_l2 dm_mod qeth ccwgroup vmur <4>CPU: 1 Not tainted 2.6.27-30.x.20081015-s390default #1 <4>Process httpd (pid: 3807, task: 20ae2df8, ksp: 1666fb78) <4>Krnl PSW : 040c0000 8027098a (number+0xe/0x348) <4> R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 <4>Krnl GPRS: 00d43318 0027097c 1666f277 9666f270 <4> 00000000 00000000 0000000a ffffffff <4> 9666f270 1666f228 1666f277 1666f098 <4> 00000002 80270982 80271016 1666f098 <4>Krnl Code: 8027097e: f0340dd0a7f1 srp 3536(4,%r0),2033(%r10),4 <4> 80270984: 0f00 clcl %r0,%r0 <4> 80270986: a7840001 brc 8,80270988 <4> >8027098a: 18ef lr %r14,%r15 <4> 8027098c: a7faff68 ahi %r15,-152 <4> 80270990: 18bf lr %r11,%r15 <4> 80270992: 18a2 lr %r10,%r2 <4> 80270994: 1893 lr %r9,%r3 Modified calltrace with annotated stackframe size of each function: stackframe size | 0 304 vsnprintf+850 [0x271016] 1 72 sprintf+74 [0x271522] 2 56 cio_start_key+262 [0x2d4c16] 3 56 ccw_device_start_key+222 [0x2dfe92] 4 56 ccw_device_start+40 [0x2dff28] 5 48 raw3215_start_io+104 [0x30b0f8] 6 56 raw3215_write+494 [0x30ba0a] 7 40 con3215_write+68 [0x30bafc] 8 40 __call_console_drivers+146 [0x12b0fa] 9 32 _call_console_drivers+102 [0x12b192] 10 64 release_console_sem+268 [0x12b614] 11 168 vprintk+462 [0x12bca6] 12 72 printk+68 [0x12bfd0] 13 256 __print_symbol+50 [0x15a882] 14 56 __show_trace+162 [0x103d06] 15 32 show_trace+224 [0x103e70] 16 48 show_stack+152 [0x103f20] 17 56 dump_stack+126 [0x104612] 18 96 __alloc_pages_internal+592 [0x175004] 19 80 cache_alloc_refill+776 [0x196f3c] 20 40 __kmalloc+258 [0x1972ae] 21 40 __alloc_skb+94 [0x328086] 22 32 pskb_copy+50 [0x328252] 23 32 skb_realloc_headroom+110 [0x328a72] 24 104 qeth_l2_hard_start_xmit+378 [0x7803bfde] 25 56 dev_hard_start_xmit+450 [0x32ef6e] 26 56 __qdisc_run+390 [0x3425d6] 27 48 dev_queue_xmit+410 [0x331e06] 28 40 ip_finish_output+308 [0x354ac8] 29 56 ip_output+218 [0x355b6e] 30 24 ip_local_out+56 [0x354584] 31 120 ip_queue_xmit+300 [0x355cec] 32 96 tcp_transmit_skb+812 [0x367da8] 33 40 tcp_push_one+158 [0x369fda] 34 112 tcp_sendmsg+852 [0x35d5a0] 35 240 sock_sendmsg+164 [0x32035c] 36 56 kernel_sendmsg+86 [0x32064a] 37 88 sock_no_sendpage+98 [0x322b22] 38 104 tcp_sendpage+70 [0x35cc1e] 39 48 sock_sendpage+74 [0x31eb66] 40 64 pipe_to_sendpage+102 [0x1c4b2e] 41 64 __splice_from_pipe+120 [0x1c5340] 42 72 splice_from_pipe+90 [0x1c57e6] 43 56 generic_splice_sendpage+38 [0x1c5832] 44 48 do_splice_from+104 [0x1c4c38] 45 48 direct_splice_actor+52 [0x1c4c88] 46 80 splice_direct_to_actor+180 [0x1c4f80] 47 72 do_splice_direct+70 [0x1c5112] 48 64 do_sendfile+360 [0x19de18] 49 72 sys_sendfile64+126 [0x19df32] 50 336 sysc_do_restart+18 [0x111a1a] Signed-off-by: -
Heiko Carstens authored
allyesconfig and allmodconfig built kernels have a tape IPL record. A the vmreader record makes much more sense, since hardly anybody will ever IPL a kernel from tape. So change the default. As I side effect I can test these kernels without fiddling around with the kernel config ;) Signed-off-by:
-
Frank Munzert authored
Get tape device lock with interrupts disabled. Otherwise lockdep will issue a warning similar to: ================================= [ INFO: inconsistent lock state ] 2.6.27 #1 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. vol_id/2903 [HC0[0]:SC0[0]:HE1:SE1] takes: (sch->lock){++..}, at: [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape] {in-hardirq-W} state was registered at: [<000000000007ce5c>] __lock_acquire+0x894/0xa74 [<000000000007d0ce>] lock_acquire+0x92/0xb8 [<0000000000345154>] _spin_lock+0x5c/0x9c [<0000000000202264>] do_IRQ+0x124/0x1f0 [<0000000000026610>] io_return+0x0/0x8 irq event stamp: 847 hardirqs last enabled at (847): [<000000000007aca6>] trace_hardirqs_on+0x2a/0x38 hardirqs last disabled at (846): [<0000000000076ca2>] trace_hardirqs_off+0x2a/0x38 softirqs last enabled at (0): [<000000000004909e>] copy_process+0x43e/0x11f4 softirqs last disabled at (0): [<0000000000000000>] 0x0 other info that might help us debug this: 1 lock held by vol_id/2903: #0: (&bdev->bd_mutex){--..}, at: [<000000000010e0f4>] do_open+0x78/0x358 stack backtrace: CPU: 1 Not tainted 2.6.27 #1}, Process vol_id (pid: 2903, task: 000000003d4c0000, ksp: 000000003d4e3b10) 0400000000000000 000000003d4e3830 0000000000000002 0000000000000000 000000003d4e38d0 000000003d4e3848 000000003d4e3848 00000000000168a8 0000000000000000 000000003d4e3b10 0000000000000000 0000000000000000 000000003d4e3830 000000000000000c 000000003d4e3830 000000003d4e38a0 000000000034aa98 00000000000168a8 000000003d4e3830 000000003d4e3880 Call Trace: ([<000000000001681c>] show_trace+0x138/0x158) [<0000000000016902>] show_stack+0xc6/0xf8 [<00000000000170d4>] dump_stack+0xb0/0xc0 [<0000000000078810>] print_usage_bug+0x1e8/0x228 [<000000000007a71c>] mark_lock+0xb14/0xd24 [<000000000007cd5a>] __lock_acquire+0x792/0xa74 [<000000000007d0ce>] lock_acquire+0x92/0xb8 [<0000000000345154>] _spin_lock+0x5c/0x9c [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape] [<000003e00005185c>] tapeblock_open+0x98/0xd0 [tape] Signed-off-by:Frank Munzert <munzert@de.ibm.com> Signed-off-by:
-
Roel Kluin authored
unsigned ops->size cannot be negative Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Frank Munzert authored
__blk_end_request must be called with request queue lock held. We need to use blk_end_request rather than __blk_end_request. Signed-off-by:
-
Heiko Carstens authored
Use sysdev_class_create_file() to create create sysdev class attributes instead of sysfs_create_file(). Using sysfs_create_file() wasn't a very good idea since the show and store functions have a different amount of parameters for sysfs files and sysdev class files. In particular the pointer to the buffer is the last argument and therefore accesses to random memory regions happened. Still worked surprisingly well until we got a kernel panic. Cc: stable@kernel.org Signed-off-by:
-
Christian Borntraeger authored
The current enable_sie code sets the mm->context.pgstes bit to tell dup_mm that the new mm should have extended page tables. This bit is also used by the s390 specific page table primitives to decide about the page table layout - which means context.pgstes has two meanings. This can cause any kind of bugs. For example - e.g. shrink_zone can call ptep_clear_flush_young while enable_sie is running. ptep_clear_flush_young will test for context.pgstes. Since enable_sie changed that value of the old struct mm without changing the page table layout ptep_clear_flush_young will do the wrong thing. The solution is to split pgstes into two bits - one for the allocation - one for the current state Signed-off-by:
-
Jan Glauber authored
Remove the memset since zeroing the string is not needed and use snprintf instead of sprintf. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
Jan Glauber authored
In case of I/O errors on a qdio subchannel qdio_shutdown may be called twice by the qdio driver and by zfcp. Remove the superfluous shutdown from qdio and let the upper layer driver handle the error condition. Signed-off-by:
-
qinghuang feng authored
When we failed to get tasklist_lock eventually (count equals 0), we should only print " ignoring it.\n", and not print " locked it.\n" needlessly. Signed-off-by:
Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by:
-
Shaohua Li authored
Impact: fix crash with memory hotplug Shuahua Li found: | I just did some experiments on a desktop for memory hotplug and this bug | triggered a crash in my test. | | Yinghai's suggestion also fixed the bug. We don't need to round it, just remove that extra -1 Signed-off-by:
Yinghai <yinghai@kernel.org> Signed-off-by:
-
David Milburn authored
Enclosure management bit mask definitions. Signed-off-by:
David Milburn <dmilburn@redhat.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
David Milburn authored
Synchronize ahci_sw_activity and ahci_sw_activity_blink with ata_port lock. Signed-off-by:
-
Alan Cox authored
I had assumed that the standard recovery would be sufficient for this hardware but it isn't. Fix up the other registers on resume as needed. See bug #11735 Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Ondrej Zary authored
[http://lkml.org/lkml/2008/10/18/82] Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
-
Tejun Heo authored
libata EH saves xfer_mode and ncq_enabled at start to later set DUBIOUS_XFER flag if it has changed. These values need to be cleared on device detach such that hot device swap doesn't accidentally miss DUBIOUS_XFER. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
Due to request posting limitations, bandwidth of sil3132 is limited to around 120MB/s with the minimum pci-e payload size (128bytes) which is used by most consumer systems. However, write throughput can be slightly (~3%) increased by increasing the max read requeset size. Configure it to 4k which is the maximum supported. This optimization is also done by SIMG's windows driver. Signed-off-by:
-
Randy Dunlap authored
Fix libata missing kernel-doc: Warning(lin2628-rc2//drivers/ata/libata-core.c:4562): No description found for parameter 'tag' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Tejun Heo authored
There were several places where only enabled devices should be iterated over but device enabledness wasn't checked. * IDENTIFY data 40 wire check in cable_is_40wire() * xfer_mode/ncq_enabled saving in ata_scsi_error() * DUBIOUS_XFER handling in ata_set_mode() While at it, reformat comments in cable_is_40wire(). Signed-off-by:
-
Mark Nelson authored
Add an appropriate entry for the Promise PDC42819 controller. It has an AHCI mode and so far works correctly with board_ahci. This chip is found on Promise's FastTrak TX2650 (2 port) and TX4650 (4 port) software-based RAID cards (for which there is a binary driver, t3sas) and can be found on some motherboards, for example the MSI K9A2 Platinum, which calls the chip a Promise T3 controller. Although this controller also supports SAS devices, its default bootup mode is AHCI and the binary driver has to do some magic to get the chip into the appropriate mode to drive SAS disks. Seeing as no documentation is provided by Promise, adding this entry to the ahci driver allows the controller to be useful to people as a SATA controller (with no ill effects on the system if a SAS disk is connected - probing of the port just times out with "link online but device misclassified"), without having to resort to using the binary driver. Users who require SAS or the proprietary software raid can get this functionality using the binary driver. Signed-off-by:
Mark Nelson <mdnelson8@gmail.com> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
- 27 Oct, 2008 5 commits
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: libata: fix NCQ devices behind port multipliers scsi: make sure that scsi_init_shared_tag_map() doesn't overwrite existing map
-
Jens Axboe authored
For devices behind sata port multipliers, we have to make sure that they share a tag map since all tags for that PMP must be unique. Signed-off-by:Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Right now callers have to check whether scsi_host->bqt is already set up, it's much cleaner to just have scsi_init_shared_tag_map() does this check on its own. Signed-off-by: -
Yinghai Lu authored
Impact: get correct page count in /proc/meminfo found page count in /proc/meminfo is nor correct on 1G system in VirtualBox 2.0.4 # cat /proc/meminfo MemTotal: 1017508 kB MemFree: 822700 kB Buffers: 1456 kB Cached: 26632 kB SwapCached: 0 kB ... Hugepagesize: 2048 kB DirectMap4k: 4032 kB DirectMap2M: 18446744073709549568 kB with this patch get: ... DirectMap4k: 4032 kB DirectMap2M: 1044480 kB which is consistent to kernel_page_tables ---[ Low Kernel Mapping ]--- 0xffff880000000000-0xffff880000001000 4K RW PCD GLB x pte 0xffff880000001000-0xffff88000009f000 632K RW GLB x pte 0xffff88000009f000-0xffff8800000a0000 4K RW PCD GLB x pte 0xffff8800000a0000-0xffff880000200000 1408K RW GLB x pte 0xffff880000200000-0xffff88003fe00000 1020M RW PSE GLB x pmd 0xffff88003fe00000-0xffff88003fff0000 1984K RW GLB NX pte 0xffff88003fff0000-0xffff880040000000 64K pte 0xffff880040000000-0xffff888000000000 511G pud 0xffff888000000000-0xffffc20000000000 58880G pgd Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Jiri Kosina authored
Impact: documentation fix sched-design-CFS.txt wrongly references sched_granularity_ns sysctl, as its name in fact is sched_min_granularity_ns. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
