Fix breakage added in the IDE devel tree.

Add header, then fix

drivers/ide/ppc/pmac.c: In function `pmac_ide_setup_dma':
drivers/ide/ppc/pmac.c:2044: warning: assignment from incompatible pointer type
drivers/ide/ppc/pmac.c: In function `pmac_ide_dma_host_on':
drivers/ide/ppc/pmac.c:1989: warning: control reaches end of non-void function
include/linux/pci.h: In function `pmac_ide_init':
drivers/ide/ppc/pmac.c:1563: warning: ignoring return value of `pci_register_driver', declared with attribute warn_unused_result

Then add some apparently-long-missing error handling.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment.
Signed-off-by: Magnus Damm <damm@opensource.se>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The function ide_get_best_pio_mode() fails to return the correct IORDY setting
for the explicitly specified modes -- fix this along with the heading comment,
and also remove the long commented out code.

Also, while at it, correct the misliading comment about the PIO cycle time in
<linux/ide.h> -- it actually consists of only the active and recovery periods,
with only some chips also including the address setup time into equation...

[ bart: sl82c105 seems to be currently the only driver affected by this fix ]
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The tuneproc() method in both these drivers failed to set the drive's own speed.
Fix this by renaming the function and "wrapping around it" the new tuneproc()
method.  Switch back to calling tuneproc() in the PIO fallback code.
While at it, also convert the rest of the PIO timing code into proper C. :-)

Has been kind of tested on SLC90E66.  I'm too lazy to reboot my box and test
on ICH4... :-)

[ bart: I quickly tested it on ICH4. ]
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

eighty_ninty_three() had word 93 validitity check but not the 80c bit
test itself (bit 13).  This increases the chance of incorrect wire
detection especially because host side cable detection is often
unreliable and we sometimes soley depend on drive side cable
detection.  Fix it.

[ bart: fix off-by-1 bit name in the patch description ]
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The driver's tuneproc() method fails to set the drive's own speed -- fix this
by renaming the function to cmd64x_tune_pio(), making it return the mode set,
and "wrapping" the new tuneproc() method around it; while at it, also get rid
of the non-working prefetch control code (filtering out related argument values
in the "wrapper"), remove redundant PIO5 mode limitation, make cmdprintk() give
more sensible mode info, and remove mention about the obsolete /proc/ interface.
Get rid of the broken config_chipset_for_pio() which always tried to set PIO4,
switch to always auto-tuning PIO instead.
Oh, and add the missing PIO5 support to the speedproc() method while at it. :-)

Warning: compile tested only -- getting to the real hardware isn't that easy...

On Tuesday 06 February 2007 22:11, Mikael Pettersson <mikpe@it.uu.se> wrote:
> 
> Worked fine on my SPARC Ultra5 with a CMD646 IDE controller.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The driver's tuneproc() method fails to set the drive's own speed -- fix this
by renaming the function to ali15x3_tune_pio() and "wrapping" the new tuneproc()
method around it and making it return the mode set, update the heading comment.

Also, setting PIO mode via the speedproc() method does not work due to passing 
to the tuneproc() method's a mode number not biased by XFER_PIO_0 -- fix this
along with a typo in the heading comment...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: add CONFIG_PM to libata core layer
  libata: add missing CONFIG_PM in LLDs
  libata: add missing PM callbacks
  pata_qdi: Fix initialisation
  [libata] pata_cmd64x: fix driver description in comments
  [libata] pata_{legacy,sc1200,sl82c105}: add missing hooks
  [libata] change master/slave IDENTIFY order
  libata-core: Fix simplex handling

Noticed by Doug Nazar (via David Miller).
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The information contained within platform_data should be self-contained.
Replace the pointer to a MAC address with the actual MAC address in
struct mv643xx_eth_platform_data.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Commit 908b637f removed ETH_DMA_ALIGN
but missed a usage of it in a macro, which broke the build.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This missing line caused transmit errors on the Qlogic 4032 chip.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch adds a "-ko" tag to the driver version.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Fix copyright and license ("regents" should not have ever been used).
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

No need to stop tc35815 before resetting the board.  This fixes the
build of tc35815 as a module.  This also means there is no caller of
tc35815_killall left, so remove that function also.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Conditionalize all PM related stuff in libata core layer using
CONFIG_PM.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add missing #ifdef CONFIG_PM conditionals around all PM related parts
in libata LLDs.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Some LLDs were missing scsi device PM callbacks while having host/port
suspend support.  Add missing ones.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Based upon a report by Andrew Walrond.
Signed-off-by: David S. Miller <davem@davemloft.net>

If you'll recall, over a year ago, I pointed out that the current
Radeon driver erroneously returns -EINVAL for valid blanking codes,
here is a link to that thread:

	http://lkml.org/lkml/2006/1/28/6

No other driver does this, and it confuses the X server into thinking
that the device does not support blanking properly.

I looked again and there is simply no reason for the Radeon driver to
return -EINVAL for FB_BLANK_NORMAL.  It claims it wants to do this in
order to convince fbcon to blank in software, right here:

			if (fb_blank(info, blank))
				fbcon_generic_blank(vc, info, blank);

to software blank the screen.  But it only causes that to happen
in the FB_BLANK_NORMAL case.

That makes no sense because the Radeon code does this:

		val |= CRTC_DISPLAY_DIS;

in the FB_BLANK_NORMAL case so should be blanking the hardware, and
there is therefore no reason to SW blank by returning -EINVAL.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Antonino Daplas <adaplas@gmail.com>

Another powerpc compatibility item, this will allow us to share
more code with them.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Just leave them as zero if we couldn't calculate it.
Signed-off-by: David S. Miller <davem@davemloft.net>

We mistakedly modify 'bus' in the innermost loop.  What
should happen is that at each register index iteration,
we start with the same 'bus'.

So preserve it's value at the top level, and use a loop
local variable 'dbus' for iteration.

This bug causes registers other than the first to be
decoded improperly.
Signed-off-by: David S. Miller <davem@davemloft.net>

The QDI init code contains some bugs which mean it only works if you have
a test setup that causes both a successful and failed probe. Fix this

Found by Philip Guo

(Who found it working on code analysis tools not running VLB IDE
controllers)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Trivial comment fix, taken out of a larger Alan Cox patch.
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Alan Cox noticed several hooks in pata_* drivers were missing, when
he authored his ->cable_detect hook patches.  This patch extracts
just those fixes from Alan's patches, adding the necessary hooks
(usually ->freeze, ->thaw, and ->post_internal_cmd) to the drivers.
Signed-off-by: Jeff Garzik <jeff@garzik.org>

2.6.21-rc has horrible problems with libata and PATA cable types (and
thus speeds). This occurs because Tejun fixed a pile of other bugs and
we now do cable detect enforcement for drive side detection properly.

Unfortunately we don't do the process around cable detection right. Tejun
identified the problem and pointed to the right Annex in the spec, this patch
implements the needed changes.

The basic requirement is that we have to identify the slave before the
master.

The patch switches the identify order so that we can do the drive side
detection correctly.

[NOTE: patch and description extracted from a larger work written
and signed-off-by Alan Cox]
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The initial simplex handling code is fooled if you suspend and resume.
This also causes problems with some single channel controllers which
claim to be simplex.

The fix is fairly simple, instead of keeping a flag to remember if we
gave away the simplex channel we remember the actual owner. As the owner
is always part of the host_set we don't even need a refcount.

Knowing the owner also means we can reassign simplex DMA channels in
future hotplug code etc if we need to
Signed-off-by: Alan Cox <alan@redhat.com>
(and a signed-off for the patch I sent before while I remember)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: improve spurious SDB FIS handling
  ahci/pata_jmicron: match class not function number
  jmicron ATA: reimplement jmicron ATA quirk
  pata_jmicron: drop unnecessary device programming in [re]init
  libata: blacklist FUJITSU MHT2060BH for NCQ
  sata_sil24: kill unused local variable idx in sil24_fill_sg()
  libata: clear drvdata in ata_host_release(), take#2

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle button
  HID: add git tree information to MAINTAINERS
  HID: fix broken Logitech S510 keyboard report descriptor; make extra keys work
  HID: fix possible double-free on error path in hid parser
  HID: hid-debug.c should #include <linux/hid-debug.h>
  HID: fix bug in zeroing the last field byte in output reports
  USB HID: use CONFIG_HID_DEBUG for outputting report descriptor
  USB HID: Fix USB vendor and product IDs endianness for USB HID devices

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix parport_pc build.
  [SPARC64]: Update defconfig.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: Fix minisock tcp_create_openreq_child() typo.
  [TCP]: Document several sysctls.
  [NET]: Fix kfree(skb)
  [NET]: Handle disabled preemption in gfp_any()
  [BRIDGE]: Fix locking of set path cost.
  [IPV6]: /proc/net/anycast6 unbalanced inet6_dev refcnt
  [IPX]: Remove ancient changelog
  [IPX]: Remove outdated information from Kconfig
  [NET]: Revert socket.h/stat.h ifdef hacks.
  [IPV6]: anycast refcnt fix
  [XFRM] xfrm_user: Fix return values of xfrm_add_sa_expire.

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5305): Mark VIDIOC_DBG_S/G_REGISTER as experimental
  V4L/DVB (5271): Add VIDIOC_TRY_ENCODER_CMD and VIDIOC_ENCODER_CMD ioctls.
  V4L/DVB (5270): Add VIDIOC_G_ENC_INDEX ioctl
  V4L/DVB (5276): Cxusb: fix firmware patch for big endian systems
  V4L/DVB (5258): Cafe_ccic: fix compiler warning
  V4L/DVB (5295): Digitv: open nxt6000 i2c_gate for TDED4 tuner handling
  V4L/DVB (5304): Improve chip matching in v4l2_register
  V4L/DVB (5255): Fix cx25840 firmware loading.

B0rkage introduced by dfa87c82.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Spurious SDB FIS during NCQ might not contain spurious completions.
It could be spurious TF update or invalid async notification.  Treat
as HSM violation iff a spurious SDB FIS contains spurious completions;
otherwise, just whine once about it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Make jmiron_ata quirk update pdev->class after programming the device
and update ahci and pata_jmicron such that they match class code
instead of checking function number manually.  For ahci, it matches
for vendor and class.  For pata_jmicron, it matches vendor, device and
class as IDE class isn't as well defined as AHCI class.

This makes jmicron device matching more conventional and script
friendly.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>