Allows booting from USB drive.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds documentation for OMAP.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP needs I2C early during boot.
Signed-off-by: Tony Lindgren <tony@atomide.com>

JFFS2 fixes.
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Makes low-level printk work.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds defconfigs.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Linker compile fix for gcc-3.3.4.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds function to get clock usecount.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Include device header for dma-mapping.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Boots 730 without a bootloader
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for running 32KHz timer at 100HZ using modulo code.

Signed-off-by: Tuukka Tikkanen <>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for integrated DSP on OMAP processors.
Signed-off-by: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Boots 730 without bootloader.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for GPIO switch
Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for boot reason.
Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for board specific tag ATAG_BOARD.
Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for OMAP dual mode timer.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enables dynamic tick timer for OMAP.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds ARM generic support for dynamic tick timer.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Adds cpufreq support for OMAP.
Does not yet include changing memory timings.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates to low-level USB initialization.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. PM updates to make deep sleep work.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Improves the locking for pin multiplexing.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Fixes for clock framework,
DSP related updates, and optional polling read and write.

DSP updates by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
Polling read and write by Nishant Menon <x0nishan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Adds wake-up functionality to GPIO interrupts.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates DMA code to check for active
LCD transfers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates clock framework to reset unused clocks
with a late_initcall.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Splits OMAP1 specific low-level init file
common.c into smaller files, and moves them into omap1 subdirectory.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Moves OMAP1 specific board files
to omap1 subdirectory.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Moves OMAP1 specific core files, such
as irq.c, time.c and fpga.c to omap1 subdirectory.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Move OMAP1 specific files to omap1
subdirectory to allow sharing code with upcoming OMAP2 boards.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates from various OMAP developers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This fixes some x86_64 bugs -

- maybe_map returns -1 on error instead of 0, which is interpreted as
  physical address 0

- removed an include of ipc.h, which isn't needed

- fixed the calculation of signal frame location

- the signal delivery code is now immune to the stack expansion check

- added a missing include
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

tt-mode closes switch_pipes in exit_thread_tt and kills processes in
switch_to_tt, if the exit_state is EXIT_DEAD or EXIT_ZOMBIE.

In very rare cases the exiting process can be scheduled out after having set
exit_state and closed switch_pipes (from release_task it calls proc_pid_flush,
which might sleep).  If this process is to be restarted, UML failes in
switch_to_tt with:

   write of switch_pipe failed, err = 9

We fix this by closing switch_pipes not in exit_thread_tt, but later in
release_thread_tt.  Additionally, we set switch_pipe[0] = 0 after closing.
switch_to_tt must not kill "from" process depending on its exit_state, but
must kill it after release_thread was processed only, so it examines
switch_pipe[0] for its decision.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Only x86 and x86_64 use arch_align_stack(), all other subarches have:

 #define arch_align_stack(x) (x)

So, if this definition is found, UML's own arch_align_stack() should be
skipped.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

tt/mem.c still uses hardcoded TOP for i386 instead of CONFIG_TOP_ADDR provided
by subarch's Kconfig_XXXX, which would be right.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

So, there I was, looking at my own code, wondering what the magic setjmp
return values did.  This patch turns the constants that are used to make
requests of the initial thread into meaningful symbols.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This eliminates some stuff from arch/um/kernel/Makefile which refers to a
file which has long since been deleted.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Eliminate the non-inline version of switch_mm, which can't be used,
considering the inline version in asm/mmu_context.h
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>