- 23 Sep, 2009 40 commits
-
-
Florian Tobias Schandinat authored
Fix the range check for panning. The current code fails to detect some invalid values (very high ones that can occur if an app tries to move further up/left than 0,0) as the check uses the unknown values for calculation so that an overflow can occur. To fix this it is sufficient to move the calculation to the right side to use only trusted values. Kai Jiang detected this problem and proposed an initial patch. Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Kai Jiang <b18973@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Julia Lawall authored
Check that the result of kmalloc is not NULL before passing it to other functions. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> [akpm@linux-foundation.org: convert to kstrdup() as well] Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by:
-
Roel Kluin authored
It reads linetable[] before checking bounds of index, and ARRAY_SIZE is required because linetable[] are unsigned shorts. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Harald Welte authored
Signed-off-by:
Harald Welte <HaraldWelte@viatech.com> Signed-off-by:
-
Harald Welte authored
Signed-off-by:
-
Florian Tobias Schandinat authored
Enable 2D hardware acceleration on VX855 for copyarea, imageblit and fillrect by selecting the correct engine which is the same as in VX800. Signed-off-by:
-
Harald Welte authored
Add support for a new VIA integrated graphics chipset, the VX855. Signed-off-by:
-
Florian Tobias Schandinat authored
viafb: use read-only mode parsing The previous method of mode parsing wrote to the strings resulting in truncated mode strings in the sysfs. Signed-off-by:
-
Harald Welte authored
Remove a structure member 'on_slot' in the chip_info structure which is completely unused. Signed-off-by:
-
Harald Welte authored
Signed-off-by:
-
Florian Tobias Schandinat authored
The main motivation of this patch was to merge the three initialization functions in one and clean it up. However as some changes in other code areas where needed to do it right some small other changes were made. Changes to viafb_par: io_virt renamed as engine_mmio and moved to shared VQ_start renamed as vq_vram_addr and moved to shared VQ_end removed as it is easily recalculatable vq_vram_addr is not strictly needed but keep it to track where we allocated video memory. The memory allocated for the virtual queue was shrunk to VQ_SIZE as VQ_SIZE+CURSOR_SIZE looked like a bug to me. But to be honest I don't have the faintest idea what virtual queues are for in the graphic hardware and whether the driver needs them in any way. I only know that they aren't directly accessed by the driver and so the only potential current use would be as hardware internal buffers. For now keep them to avoid regressions and only remove the double cursor allocation. The most changes were caused by renames and the mentioned structure changes so the chance of regressions is pretty low. The meaning of viafb_accel changed slightly as previously it was changed back and forth in the code and allowed to enable the hardware acceleration by software if previously disabled. The new behaviour is that viafb_accel=0 always prevents hardware acceleration. With viafb_accel!=0 the acceleration can be freely choosen by set_var. This means viafb_accel is a diagnostic tool and if someone has to use viafb_accel=0 the driver needs to be fixed. As this is mostly a code cleanup no regressions beside the slightly change of viafb_accel is expected. Signed-off-by:
-
Florian Tobias Schandinat authored
Split the pitch handling up and replaces the calculation from virtual xres and bpp with fix.line_length which already contains the pitch and does not add any constrains for the virtual resolution. Also add a bit to the second pitch which the documentation mentions but which was ignored by the driver. Although it is a bit unclear what the right pitch for some LCD modes is this patch should have no negative runtime impact. Signed-off-by:
-
Florian Tobias Schandinat authored
Clean the hardware cursor handling up. The most notable change is that it no longer buffers the values in viacursor but uses the ones in cursor instead as they are guaranteed to be always valid. Furthermore it uses local instead global variables where possible, moves the cursor variable in shared as only one hardware cursor is supported and returns an error if memory allocation fails. Last but not least it fixes a too small buffer (as u32 has only 4 and not 32 bytes) but this did not produce any known problems. This is mostly a code cleanup, no negative runtime changes are expected. Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
-
Florian Tobias Schandinat authored
This patch is a completly rewritten 2D engine. The engine is no longer in a default state but reinitialized every time to allow usage for both framebuffers regardless of their settings. The whole engine handling is concentrated in a big function which takes 16 parameters. Although the number of parameters is worryingly it is good to have a single funtion to deal with this stuff as it allows to easily support different engines and avoids some code duplication. On the way support for the new 2D engine in VX800 was added. As the with less code duplication but it is probably better to duplicate the code as this way is easier to walk if VIA ever decides to release a new engine which changes anything the driver touches. The engine support for VX800 gives a notable boost in speed. There are no known regressions but as this patch changes paths I do neither have the hardware nor documentation to check and has the possibility to put the system in a critical state heavy testing is appreciated. Signed-off-by:
-
Florian Tobias Schandinat authored
This patch introduces viafb_shared and is the beginning of a smooth transition to use it. viafb_shared should contain all general, non-surface specific data that should be shared along all viafb framebuffers while viafb_par should only contain things that are specific to each surface or in other words extend fb_info. This change is intended to clean the dual/multi framebuffer handling up. This removes the annoyance that viafbinfo1->par points to a different structure than viaparinfo1. As the last change is fundamental it is difficult to ensure that all parts of the driver do not depend on the previous brokenness but the chance of regressions is very low. Signed-off-by:
-
Florian Tobias Schandinat authored
This removes the completly useless io variable as well as the temporary used variables mmio_base and mmio_len in favor to use directly the fb_info variables. This is a code cleanup only, no runtime change expected. Signed-off-by:
-
Florian Tobias Schandinat authored
At least for VX800 this initialization is not very good as some parts of the register are written with reserved values. This makes the display go white in some configurations and not usable until the framebuffer is removed. It's better to not initialize it as it allows to use a previously (by BIOS) correctly configured display. This patch makes some displays work but might cause problems on others. This is bad but can not be easily avoided. If this causes some regressions it's probably the best to fix it in the 'active' display setup code. Signed-off-by:
-
Florian Tobias Schandinat authored
Remove everything related to video devices from the driver as it did not influence the driver operation. This patch does change the userspace behaviour as it removes two IOCTLs and one module parameter. But this is good as it removes useless stuff and helps the user to figure out the options that do affect the driver behaviour (which are still too many). Signed-off-by:
-
Florian Tobias Schandinat authored
Clean the handling of ioremapped video memory up. The following changes were made: info->screen_base - viafb_FB_MM (VRAM offset calculation) was replaced by info->fix.smem_start - viafbinfo->fix.smem_start which is essentially the same calculation but done with physical instead virtual addresses. *->fbmem_virt was replaced by viafbinfo->screen_base This is true for viafbinfo and viafbinfo1 as the par pointers are equal. An early initialization of viafbinfo1->fix.smem* was removed as done later in viafb_setup_fixinfo. This patch highlights that the only usage of the ioremapped video memory in the driver is for hardware cursor handling. Even if it has to hold the used virtual screen mapped for old-fashioned read/write calls (vs. mmap'ed) a lot virtual memory could be saved by only ioremapping on demand. Code cleanup, no runtime changes expected. Signed-off-by:
-
Florian Tobias Schandinat authored
Clean the duoview handling up by replacing the varible with the funtion in the only place where it is used. This is a code cleanup only, no runtime change expected. Signed-off-by:
-
Florian Tobias Schandinat authored
Remove the mode information from viafbdev.c and uses the one of viamode.c instead. This is possible because horizontal and vertical address are the same as horizontal and vertical resolution. The reduced blanking modes in the table are no problem because they have a higher index than the normal modes and therefore always the normal modes are selected just as the old behaviour. Signed-off-by:
-
Florian Tobias Schandinat authored
Remove unneeeded declarations from the header and makes it more maintainable by evaluating the array size in the file the array exist in and exporting it via variables. This removes the need to keep the array size in the header in sync with the real array size. Signed-off-by:
-
Florian Tobias Schandinat authored
Correct the returned error code for remapping the video framebuffer. Introduce error handling for remapping MMIO register address space to avoid a NULL pointer dereference. Disable hardware acceleration if remapping MMIO register address space failed as those registers are only used for hardware acceleration. Signed-off-by:
-
Florian Tobias Schandinat authored
Move individual start address setting to viafb_set_primary_address and viafb_set_secondary_address and make it more flexible to reuse it for panning. Using central functions makes it easier to follow HW manipulations. Remove crt locking as it should be only needed for timing manipulation. Move iga_path manipulation to via_pci_probe. Remove memset for screen cleaning as it is currently done only for the second screen. This is not needed for normal operation but has a little chance of causing unwanted display artifacts. This can be fixed later more consistent and more efficient (using viafb_fillrect) if needed. This is a code clenup, no notable runtime changes expected. Signed-off-by:
-
Florian Tobias Schandinat authored
Shrink and merge viafb_update_viafb_par. This removes a lot of duplicated data in viafb_par. Use the relevant data of fb_info instead. On the way it removes an inconsistency in handling a second framebuffer which only worked because viafbinfo1->par is modified to point to the same viafb_par as viafbinfo->par. Code cleanup only, no runtime change expected. Signed-off-by:
-
Florian Tobias Schandinat authored
Currently the start address is set to an initial value every time viafb_setmode is called. This is not done consistently along graphic cores and not even the whole address but often only parts of it. On top of that it seems useless as the real/final address will be set by viafb_set_start_addr a few lines later. Remove this superfluous initalization to shrink register initalization and as a start to decouple primary and secondary display. Code cleanup, no notable runtime change expected. Signed-off-by:
-
Florian Tobias Schandinat authored
The current code initializes the register for CX700 chips 2 times due to a missing break as discovered by Harald Welte. As CX700 and VX800 have exactly the same register initialization we can use one for both to avoid duplicated code. As this is a pure code cleanup no measurable runtime effects are expected. Signed-off-by:
-
Ryan Mallon authored
EP93xx video driver plus documentation. Signed-off-by:
Ryan Mallon <ryan@bluewatersys.com> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ryan Mallon authored
Signed-off-by:
-
Roel Kluin authored
If called with mode_idx = 1, rate = 68, a read occurs from sisfb_vrate[-1].refresh. Signed-off-by:
-
Sudhakar Rajashekhara authored
Since the previous version, return values in ioctl() function have been modified. [akpm@linux-foundation.org: simplify lcd_disable_raster()] Signed-off-by:
Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by:
Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by:
Steve Chen <schen@mvista.com> Acked-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Sudhakar Rajashekhara authored
Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture. LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a. LCDC on DA8xx consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. LIDD further supports character and graphic displays. This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on the DA830 based EVM. The EVM details can be found at: http://support.spectrumdigital.com/boards/dskda830/revc/. Signed-off-by:
-
Roel Kluin authored
Since `+' has a higher precedence than the trinary operator `?', this added `hres * (1 << color_mode)' to the boolean testing videomode and depth. Signed-off-by:
-
Pavel Machek authored
Add a framebuffer driver for Qualcomm MSM/QSD SoCs, tested on HTC Dream smartphone (aka T-Mobile G1, aka ADP1). Brian said: I did the original quick and dirty version for bringup. Rebecca took over and (re)wrote the bulk of the driver, getting things stable for production ship of Dream and Sapphire, and Dima is currently adding support for later Qualcomm chipsets (QSD8x50, etc). Signed-off-by:
Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Rebecca Schultz Zavin <rebecca@android.com> Cc: Dima Zavin <dima@android.com> Signed-off-by:
-
Ville Syrjala authored
Fix a bunch of coding style problems in atyfb_base.c. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Imre Deak authored
Fixes the following: warning: assignment discards qualifiers from pointer target type Signed-off-by:
Imre Deak <imre.deak@nokia.com> Acked-by:
-
Imre Deak authored
Also move the controller specific options up in the menu, to a more logical spot. Signed-off-by:
-
arun c authored
- use __iomem type attribute where appropriate - expand (a ? : b) to (a ? a : b) As suggested by Russel King <linux@arm.linux.org.uk> - remove a dead line from omapfb_main.c Signed-off-by:
Arun C <arunedarath@mistralsolutions.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Jouni Hogander authored
Check wether fbdev is NULL in suspend / resume functions. Fbdev is NULL, if there is no lcd or it is not enabled in configuration. Signed-off-by:
Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by:
-
