- 10 Nov, 2009 13 commits
-
-
Chuck Ebbert authored
revert commit 58a09b38 ("[libata] ahci: Restore SB600 SATA controller 64 bit DMA") Upstream commit 58a09b38 does nearly the same thing but this patch is simplified for 2.6.31 Disables 64-bit DMA for _all_ boards, unlike 2.6.32 which adds a whitelist. (The whitelist function requires a fairly large patch that touches unrelated code.) Doesn't revert the DMI part as other backported patches might need the exported symbol. Applies to 2.6.31.4 Signed-off-by:
Chuck Ebbert <cebbert@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Thomas Gleixner authored
commit 11df6ddd upstream. The requeue_pi path doesn't use unqueue_me() (and the racy lock_ptr == NULL test) nor does it use the wake_list of futex_wake() which where the reason for commit 41890f24 (futex: Handle spurious wake up) See debugging discussing on LKML Message-ID: <4AD4080C.20703@us.ibm.com> The changes in this fix to the wait_requeue_pi path were considered to be a likely unecessary, but harmless safety net. But it turns out that due to the fact that for unknown $@#!*( reasons EWOULDBLOCK is defined as EAGAIN we built an endless loop in the code path which returns correctly EWOULDBLOCK. Spurious wakeups in wait_requeue_pi code path are unlikely so we do the easy solution and return EWOULDBLOCK^WEAGAIN to user space and let it deal with the spurious wakeup. Cc: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> LKML-Reference: <4AE23C74.1090502@us.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Darren Hart authored
commit 89061d3d upstream. When requeuing tasks from one futex to another, the reference held by the requeued task to the original futex location needs to be dropped eventually. Dropping the reference may ultimately lead to a call to "iput_final" and subsequently call into filesystem- specific code - which may be non-atomic. It is therefore safer to defer this drop operation until after the futex_hash_bucket spinlock has been dropped. Originally-From: Helge Bahmann <hcb@chaoticmind.net> Signed-off-by:
Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> Cc: Sven-Thorsten Dietrich <sdietrich@novell.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <4AD7A298.5040802@us.ibm.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Darren Hart authored
commit 2bc87203 upstream. If userspace tries to perform a requeue_pi on a non-requeue_pi waiter, it will find the futex_q->requeue_pi_key to be NULL and OOPS. Check for NULL in match_futex() instead of doing explicit NULL pointer checks on all call sites. While match_futex(NULL, NULL) returning false is a little odd, it's still correct as we expect valid key references. Signed-off-by:
-
Thomas Gleixner authored
commit d58e6576 upstream. The futex code does not handle spurious wake up in futex_wait and futex_wait_requeue_pi. The code assumes that any wake up which was not caused by futex_wake / requeue or by a timeout was caused by a signal wake up and returns one of the syscall restart error codes. In case of a spurious wake up the signal delivery code which deals with the restart error codes is not invoked and we return that error code to user space. That causes applications which actually check the return codes to fail. Blaise reported that on preempt-rt a python test program run into a exception trap. -rt exposed that due to a built in spurious wake up accelerator :) Solve this by checking signal_pending(current) in the wake up path and handle the spurious wake up case w/o returning to user space. Reported-by:
Blaise Gassend <blaise@willowgarage.com> Debugged-by:
-
Andre Przywara authored
commit 1fdbd48c upstream. If the Linux kernel detects an C1E capable AMD processor (K8 RevF and higher), it will access a certain MSR on every attempt to go to halt. Explicitly handle this read and return 0 to let KVM run a Linux guest with the native AMD host CPU propagated to the guest. Signed-off-by:
Andre Przywara <andre.przywara@amd.com> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
commit ace15464 upstream. hrtimer->base can be temporarily NULL due to racing hrtimer_start. See switch_hrtimer_base/lock_hrtimer_base. Use hrtimer_get_remaining which is robust against it. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Yinghai Lu authored
commit 4223a4a1 upstream. Fix a (small) memory leak in one of the error paths of the NFS mount options parsing code. Regression introduced in 2.6.30 by commit a67d18f8 (NFS: load the rpc/rdma transport module automatically). Reported-by:
Yinghai Lu <yinghai@kernel.org> Reported-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tejun Heo authored
commit 6489e326 upstream. prereset doesn't bring link online if hardreset is about to happen and nv_hardreset() may skip if conditions are not right so softreset may be entered with non-working link status if the system firmware didn't bring it up before entering OS code which can happen during resume. This patch makes nv_hardreset() to bring up the link if it's skipping reset. This bug was reported by frodone@gmail.com in the following bug entry. http://bugzilla.kernel.org/show_bug.cgi?id=14329Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit 4f7c2874 upstream. Commit 842faa6c fixed error handling during attach by not committing detected device class to dev->class while attaching a new device. However, this change missed the PMP class check in the configuration loop causing a new PMP device to go through ata_dev_configure() as if it were an ATA or ATAPI device. As PMP device doesn't have a regular IDENTIFY data, this makes ata_dev_configure() tries to configure a PMP device using an invalid data. For the most part, it wasn't too harmful and went unnoticed but this ends up clearing dev->flags which may have ATA_DFLAG_AN set by sata_pmp_attach(). This means that SATA_PMP_FEAT_NOTIFY ends up being disabled on PMPs and on PMPs which honor the flag breaks hotplug support. This problem was discovered and reported by Ethan Hsiao. Signed-off-by:
Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by:
-
Tejun Heo authored
commit f4b31db9 upstream. When an internal command fails, it should be failed directly without invoking EH. In the original implemetation, this was accomplished by letting internal command bypass failure handling in ata_qc_complete(). However, later changes added post-successful-completion handling to that code path and the success path is no longer adequate as internal command failure path. One of the visible problems is that internal command failure due to timeout or other freeze conditions would spuriously trigger WARN_ON_ONCE() in the success path. This patch updates failure path such that internal command failure handling is contained there. Signed-off-by:
-
Yinghai Lu authored
commit 15b812f1 upstream. As reported in http://bugzilla.kernel.org/show_bug.cgi?id=13940 on some system when acpi are enabled, acpi clears some BAR for some devices without reason, and kernel will need to allocate devices for them. It then apparently hits some undocumented resource conflict, resulting in non-working devices. Try to increase alignment to get more safe range for unassigned devices. Signed-off-by:
-
Earl Chew authored
commit ad396024 upstream. This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by:
Earl Chew <earl_chew@agilent.com> Signed-off-by:
-
- 22 Oct, 2009 27 commits
-
-
Greg Kroah-Hartman authored
Signed-off-by: -
Linus Torvalds authored
commit c8e33141 upstream. The locking logic in this function is extremely subtle, and it broke when we started doing potentially concurrent 'flush_to_ldisc()' calls in commit e043e42b ("pty: avoid forcing 'low_latency' tty flag"). The code in flush_to_ldisc() used to set 'tty->buf.head' to NULL, with the intention that this would then cause any other concurrent calls to not do anything (locking note: we have to drop the buf.lock over the call to ->receive_buf that can block, which is why we can have concurrency here at all in the first place). It also used to set the TTY_FLUSHING bit, which would then cause any concurrent 'tty_buffer_flush()' to not free all the tty buffers and clear 'tty->buf.tail'. And with 'buf.head' being NULL, and 'buf.tail' being non-NULL, new data would never touch 'buf.head'. Does that sound a bit too subtle? It was. If another concurrent call to 'flush_to_ldisc()' were to come in, the NULL buf.head would indeed cause it to not process the buffer list, but it would still clear TTY_FLUSHING afterwards, making the buffer protection against 'tty_buffer_flush()' no longer work. So this clears it all up. We depend purely on TTY_FLUSHING for handling re-entrancy, and stop playing games with the buffer list entirely. In fact, the buffer list handling is now robust enough that we could probably stop doing the whole "protect against 'tty_buffer_flush()'" thing entirely. However, Alan also points out that we would probably be better off simplifying the locking even further, and just take the tty ldisc_mutex around all the buffer flushing calls. That seems like a good idea, but in the meantime this is a conceptually minimal fix (with the patch itself being bigger than required just to clean the code up and make it readable). This fixes keyboard trouble under X: http://bugzilla.kernel.org/show_bug.cgi?id=14388Reported-and-tested-by:
Frédéric Meunier <fredlwm@gmail.com> Reported-and-tested-by:
Boyan <btanastasov@yahoo.co.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Johannes Berg authored
commit fbc44bf7 upstream. When receiving data frames, we can send them only to the interface they belong to based on transmitting station (this doesn't work for probe requests). Also, don't try to handle other frames for AP_VLAN at all since those interface should only receive data. Additionally, the transmit side must check that the station we're sending a frame to is actually on the interface we're transmitting on, and not transmit packets to functions that live on other interfaces, so validate that as well. Another bug fix is needed in sta_info.c where in the VLAN case when adding/removing stations we overwrite the sdata variable we still need. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Jay Sternberg authored
commit 2facba76 upstream. The address stored in the next link address is a word address but when reading the OTP blocks, a byte address is used. Also if the blocks are full and the last link pointer is not zero, then none of the blocks are valid so return an error. The algorithm is simply valid blocks have a next address and that address's contents is zero. Using the wrong address for the next link address gets arbitrary data, obviously. In cases seen, the first block is considered valid when it is not. If the block has in fact been invalidated there may be old data or there may be no data, bad data, or partial data, there is no way of telling. Without this patch it is possible that a device with valid OTP data is unable to work. Signed-off-by:
Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit b8430e1b upstream. usb-storage: Workaround devices with bogus sense size Some devices, such as Huawei E169, advertise more than the standard amount of sense data, causing us to set US_FL_SANE_SENSE, assuming they support it. However, they subsequently fail the request sense with that size. This works around it generically. When a sense request fails due to a device returning an error, US_FL_SANE_SENSE was set, and that sense request used a larger sense size, we retry with a smaller size before giving up. Based on an original patch by Ben Efros <ben@pc-doctor.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Darren Salt authored
commit 0af49167 upstream. This fixes a panic which is triggered when the hardware "disappears" from beneath the driver, i.e. when wireless is toggled off via Fn-F2 on various EeePC models. Ref. bug report http://bugzilla.kernel.org/show_bug.cgi?id=13390 panic http://bugzilla.kernel.org/attachment.cgi?id=21928Signed-off-by:
Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by:
-
Neil Brown authored
commit 83db93f4 upstream. sysfs_notify_dirent is a simple atomic operation that can be used to alert user-space that new data can be read from a sysfs attribute. Unfortunately it cannot currently be called from non-process context because of its use of spin_lock which is sometimes taken with interrupts enabled. So change all lockers of sysfs_open_dirent_lock to disable interrupts, thus making sysfs_notify_dirent safe to be called from non-process context (as drivers/md does in md_safemode_timeout). sysfs_get_open_dirent is (documented as being) only called from process context, so it uses spin_lock_irq. Other places use spin_lock_irqsave. The usage for sysfs_notify_dirent in md_safemode_timeout was introduced in 2.6.28, so this patch is suitable for that and more recent kernels. Reported-by:
Joel Andres Granados <jgranado@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Michal Schmidt authored
commit d8e180dc upstream. When process accounting is enabled, every exiting process writes a log to the account file. In addition, every once in a while one of the exiting processes checks whether there's enough free space for the log. SELinux policy may or may not allow the exiting process to stat the fs. So unsuspecting processes start generating AVC denials just because someone enabled process accounting. For these filesystem operations, the exiting process's credentials should be temporarily switched to that of the process which enabled accounting, because it's really that process which wanted to have the accounting information logged. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
James Morris <jmorris@namei.org> Signed-off-by:
-
Takashi Iwai authored
commit 18c40784 upstream. The client->driver pointer can be NULL when i2c-device probing fails in i2c_new_device(). This patch adds the NULL checks for client->driver and return the error instead of blind assumption of driver availability. Reported-by:
Tim Shepard <shep@alum.mit.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jean Delvare authored
commit 18669eab upstream. When an ACPI resource conflict is detected, error messages are already printed by ACPI. There's no point in causing the driver core to print more error messages, so return one of the error codes for which no message is printed. This fixes bug #14293: http://bugzilla.kernel.org/show_bug.cgi?id=14293Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
commit 6f6b35e1 upstream. If i2c device probing fails, then there is no driver to dereference after calling i2c_new_device(). Stop assuming that probing will always succeed, to avoid NULL pointer dereferences. We have an easier access to the driver anyway. Signed-off-by:
-
Jean Delvare authored
commit 05576a1e upstream. Signed-off-by:
Riku Voipio <riku.voipio@iki.fi> Signed-off-by:
-
Alexander Duyck authored
commit a825e00c upstream. There appears to have been a mixup in the max supported jumbo frame size between 82574 and 82583 which ended up disabling jumbo frames on the 82574 as a result. This patch swaps the two so that this issue is resolved. This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=14261Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Philipp Reisner authored
(cherry picked from commit 30efa3f76813b17445bc5a2e443ae9731518566b) Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
-
Philipp Reisner authored
(cherry picked from commit 0179065b13b354cc0b940e7a632a65ec0448beff) Signed-off-by:
-
Philipp Reisner authored
(cherry picked from commit dbbb3431228784612848a1ec6061c78b4b708b5c) Signed-off-by:
-
Philipp Reisner authored
(cherry picked from commit 93136335f9ad7a98b92eacda1b43dccbf063cd07) Signed-off-by:
-
Philipp Reisner authored
(cherry picked from commit f4b5129f5e838942f759c2637967441cf4a98c20) Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Philipp Reisner authored
commit 7069331d upstream Signed-off-by:
-
Philipp Reisner authored
(cherry picked from commit 5491c43845dae6c68cb4edbcf2e2dde9a32a863d) Signed-off-by:
-
Marcel Holtmann authored
commit edad6388 upstream. The core exports the hci_conn_hold_device() and hci_conn_put_device() functions for device reference of connections. Use this to ensure that the uevents from the parent are send after the child ones. Based on a report by Brian Rogers <brian@xyzw.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Marcel Holtmann authored
commit 9eba32b8 upstream. The device model itself has no real usable reference counting at the moment and this causes problems if parents are deleted before their children. The device model itself handles the memory details of this correctly, but the uevent order is not consistent. This causes various problems for systems like HAL or even X. So until device_put() does a proper cleanup, the device for Bluetooth connection will be protected with an extra reference counting to ensure the correct order of uevents when connections are terminated. This is not an automatic feature. Higher Bluetooth layers like HIDP or BNEP should grab this new reference to ensure that their uevents are send before the ones from the parent device. Based on a report by Brian Rogers <brian@xyzw.org> Signed-off-by:
-
Marcel Holtmann authored
commit 364f6351 upstream. Currently the HID subsystem will create HIDRAW devices for the transport driver, but it will not disconnect them. Until the HID subsytem gets fixed, ensure that HIDRAW and HIDDEV devices are disconnected when the Bluetooth HID device gets removed. Based on a patch from Brian Rogers <brian@xyzw.org> Signed-off-by:
-
Rajiv Andrade authored
commit 15d031c3 upstream. The previously sent patch: http://marc.info/?l=tpmdd-devel&m=125208945007834&w=2 Had its first hunk cropped when merged, submitting only this first hunk again. Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Debora Velarde <debora@linux.vnet.ibm.com> Cc: Marcel Selhorst <m.selhorst@sirrix.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
Rajiv Andrade <srajiv@linux.vnet.ibm.com> Acked-by:
Mimi Zohar <zohar@us.ibm.com> Tested-by:
-
Jason Gunthorpe authored
commit 0afd9056 upstream. Signed-off-by:
-
Darren Hart authored
commit 0729e196 upstream. PI futexes do not use the same plist_node_empty() test for wakeup. It was possible for the waiter (in futex_wait_requeue_pi()) to set TASK_INTERRUPTIBLE after the waker assigned the rtmutex to the waiter. The waiter would then note the plist was not empty and call schedule(). The task would not be found by any subsequeuent futex wakeups, resulting in a userspace hang. By moving the setting of TASK_INTERRUPTIBLE to before the call to queue_me(), the race with the waker is eliminated. Since we no longer call get_user() from within queue_me(), there is no need to delay the setting of TASK_INTERRUPTIBLE until after the call to queue_me(). The FUTEX_LOCK_PI operation is not affected as futex_lock_pi() relies entirely on the rtmutex code to handle schedule() and wakeup. The requeue PI code is affected because the waiter starts as a non-PI waiter and is woken on a PI futex. Remove the crusty old comment about holding spinlocks() across get_user() as we no longer do that. Correct the locking statement with a description of why the test is performed. Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090922053038.8717.97838.stgit@Aeon> Signed-off-by:
-
Darren Hart authored
commit 84bc4af5 upstream. There is currently no check to ensure that userspace uses the same futex requeue target (uaddr2) in futex_requeue() that the waiter used in futex_wait_requeue_pi(). A mismatch here could very unexpected results as the waiter assumes it either wakes on uaddr1 or uaddr2. We could detect this on wakeup in the waiter, but the cleanup is more intense after the improper requeue has occured. This patch stores the waiter's expected requeue target in a new requeue_pi_key pointer in the futex_q which futex_requeue() checks prior to attempting to do a proxy lock acquistion or a requeue when requeue_pi=1. If they don't match, return -EINVAL from futex_requeue, aborting the requeue of any remaining waiters. Signed-off-by:
-
