- 25 Dec, 2009 6 commits
-
-
Dmitry Torokhov authored
Do not try to free iforce device when we closing input device; disconnect is the only place where it should be deleted. Reported-by: Johannes Ebke <johannes.ebke@physik.uni-muenchen.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Jari Vanhala authored
This adds simple direction calculation when combining effects. It's useful to decide motor direction for rumble (vibrator). Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
The commit 9e68177e changed 'gain' from signed to unsigned to fix an issue with rumble effect calculation, however it introduced problems when calculating constant effects. Having 'gain' being unsigned int was an unfortunate choice since it dominates all implicit type conversions causing everything to be treated as unsigned int. Let's change it back to signed int and simply add proper casts to rumble effect calculations. Reported-by: Gary Stein <lordcnidarian@gmail.com> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Jari Vanhala authored
Instead of waiting for the next timer tick to start playing an effect do it immediately. This mostly helps systems using low HZ setting. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
We used to make kseriod freezable to prevent unnecessary attempts at resuming keyboard and mouse before taking hibernation image when suspend and hibernation were sharing PM operations. Now that they are separated and we don't risk resuming during 'thaw' we don't need to freeze kseriod anymore. This will allow us to start resetting mouse and keyboard a bit earlier, before rest of the userspace comes back up. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Instead of doing full-blown reset while suspending or shutting down the box use lighter form of reset that should take less time. Tested-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 16 Dec, 2009 2 commits
-
-
Sebastian Kapfer authored
Properly handle version of the protocol where standard PS/2 packets from trackpoint are stuffed into middle (byte 3-6) of the standard ALPS packets when both the touchpad and trackpoint are used together. The patch is based on work done by Matthew Chapman and additional research done by David Kubicek and Erik Osterholm: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610 Many thanks to David Kubicek for his efforts in researching fine points of this new version of the protocol, especially interaction between pad and stick in these models. Signed-off-by: Sebastian Kapfer <sebastian_kapfer@gmx.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
The commit 66d2a595 introduces a bug: for every beep requested, a bell is also generated. Reported-by: Paul Martin <pm@debian.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 15 Dec, 2009 11 commits
-
-
Roel Kluin authored
ps2if->irq is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Sascha Hauer authored
This driver provides support for the touchscreen interface integrated into the Freescale MC13783. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
H Hartley Sweeten authored
This driver was merged before the ep93xx core support was added for the keypad clock and acquiring/releasing the necessary gpio's. Now that the proper support is in the ep93xx core this driver needs to be updated to work correctly. Summary of changes: 1) Remove some unused members from the platform data. 2) Remove the custom KEY macro and use the ones available in <linux/input/matrix_keypad.h> 3) Remove the keypad_{readl/writel} macros and just use __raw_{readl/writel} directly. 4) Update the clk_set_rate() call to work with the core support. 5) Cleanup the probe routine and remove some unneeded messages. 6) Use the ep93xx core functions to acquire and release the gpio's. 7) Fix the clk_get() call to get the keypad clock. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
-
Ping Cheng authored
Since Graphire/Bamboo devices report pen and expresskeys in the same data packet, we need to send a input_sync event to separate pen data from expresskeys for X11 driver to process them properly. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ping Cheng authored
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ping Cheng authored
This adds support for the foolowing Wacom devices: - 0x9F - a single touch only LCD tablet; - 0xE2 - a two finger touch only LCD tablet; - 0xE3 - a two finger touch, penabled LCD tablet. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ping Cheng authored
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ping Cheng authored
Call wacom_query_tablet_data() from wacom_resume() so the device will be switched to Wacom mode upon resume. Devices that require this are: regular tablets and two finger touch devices. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
We can't use msleep() while holding a spinlock, moreower serio's write() method is supposed to be useable from inettrupt context. Let's do what i8042 does and poll the status register every 50 us (with udelay). Reported-by: Marjan Fojkar <marjan@pajkc.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Gigabyte netbook model M1022M requires i8042.noloop, otherwise AUX port will not detected and the touchpad will not work. Unfortunately chassis type in DMI set to "Other" and thus generic laptop entry does not fire on it. Reported-by: Darryl Bond <dbond@nrggos.com.au> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 14 Dec, 2009 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: Avoid IO in udf_clear_inode udf: Try harder when looking for VAT inode udf: Fix compilation with UDFFS_DEBUG enabled
-
Jan Kara authored
It is not very good to do IO in udf_clear_inode. First, VFS does not really expect inode to become dirty there and thus we have to write it ourselves, second, memory reclaim gets blocked waiting for IO when it does not really expect it, third, the IO pattern (e.g. on umount) resulting from writes in udf_clear_inode is bad and it slows down writing a lot. The reason why UDF needed to do IO in udf_clear_inode is that UDF standard mandates extent length to exactly match inode size. But when we allocate extents to a file or directory, we don't really know what exactly the final file size will be and thus temporarily set it to block boundary and later truncate it to exact length in udf_clear_inode. Now, this is changed to truncate to final file size in udf_release_file for regular files. For directories and symlinks, we do the truncation at the moment when learn what the final file size will be. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Some disks do not contain VAT inode in the last recorded block as required by the standard but a few blocks earlier (or the number of recorded blocks is wrong). So look for the VAT inode a bit before the end of the media. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Signed-off-by: Jan Kara <jack@suse.cz>
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: Clean up thermal init by introducing intel_thermal_supported() x86, mce: Thermal monitoring depends on APIC being enabled x86: Gart: fix breakage due to IOMMU initialization cleanup x86: Move swiotlb initialization before dma32_free_bootmem x86: Fix build warning in arch/x86/mm/mmio-mod.c x86: Remove usedac in feature-removal-schedule.txt x86: Fix duplicated UV BAU interrupt vector nvram: Fix write beyond end condition; prove to gcc copy is safe mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe x86: Limit the number of processor bootup messages x86: Remove enabling x2apic message for every CPU doc: Add documentation for bootloader_{type,version} x86, msr: Add support for non-contiguous cpumasks x86: Use find_e820() instead of hard coded trampoline address x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: CodingStyle fixes pcmcia: remove unused IRQ_FIRST_SHARED
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf sched: Fix build failure on sparc perf bench: Add "all" pseudo subsystem and "all" pseudo suite perf tools: Introduce perf_session class perf symbols: Ditch dso->find_symbol perf symbols: Allow lookups by symbol name too perf symbols: Add missing "Variables" entry to map_type__name perf symbols: Add support for 'variable' symtabs perf symbols: Introduce ELF counterparts to symbol_type__is_a perf symbols: Introduce symbol_type__is_a perf symbols: Rename kthreads to kmaps, using another abstraction for it perf tools: Allow building for ARM hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value perf tools: Allow cross compiling tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING Trivial conflict due to different fixes to modify_user_hw_breakpoint() in include/linux/hw_breakpoint.h
-
David Howells authored
Global variable declarations must match the definitions in section attributes as the compiler is at liberty to vary the method it uses to access a variable, depending on the section it is in. When building the FRV arch, I now see: drivers/built-in.o: In function `pci_apply_final_quirks': drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o because the declaration of pci_dfl_cache_line_size in linux/pci.h does not match the definition in drivers/pci/pci.c. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
If there is no hardware breakpoint support, modify_user_hw_breakpoint() tries to return a NULL pointer through as an 'int' return value: In file included from kernel/exit.c:53: include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint': include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast Return 0 instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits) microblaze: Remove rt_sigsuspend wrapper microblaze: nommu: Don't clobber R11 on syscalls microblaze: Remove show_tmem function microblaze: Support for WB cache microblaze: Add PVR for Microblaze v7.30.a microblaze: Remove ancient and fake microblaze version from cpu_ver table microblaze: Remove panic_timeout init value microblaze: Do not count system calls in default microblaze: Enable DTC compilation microblaze: Core oprofile configs and hooks microblaze: Fix level interrupt ACKing microblaze: Enable futimesat syscall microblaze: Checking DTS against PVR for write-back cache microblaze: Remove duplicity from pgalloc.h microblaze: Futex support microblaze: Adding dev_arch_data functions microblaze: Fix the heartbeat gpio to be more robust microblaze: Simple __copy_tofrom_user for noMMU microblaze: Export memory_start for modules microblaze: Use lowest-common-denominator default CPU settings ...
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: (27 commits) md: add 'recovery_start' per-device sysfs attribute md: rcu_read_lock() walk of mddev->disks in md_do_sync() md: integrate spares into array at earliest opportunity. md: move compat_ioctl handling into md.c md: revise Kconfig help for MD_MULTIPATH md: add MODULE_DESCRIPTION for all md related modules. raid: improve MD/raid10 handling of correctable read errors. md/raid10: print more useful messages on device failure. md/bitmap: update dirty flag when bitmap bits are explicitly set. md: Support write-intent bitmaps with externally managed metadata. md/bitmap: move setting of daemon_lastrun out of bitmap_read_sb md: support updating bitmap parameters via sysfs. md: factor out parsing of fixed-point numbers md: support bitmap offset appropriate for external-metadata arrays. md: remove needless setting of thread->timeout in raid10_quiesce md: change daemon_sleep to be in 'jiffies' rather than 'seconds'. md: move offset, daemon_sleep and chunksize out of bitmap structure md: collect bitmap-specific fields into one structure. md/raid1: add takeover support for raid5->raid1 md: add honouring of suspend_{lo,hi} to raid1. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits) mfd: Add twl6030 regulator subdevices regulator: Add support for twl6030 regulators rtc: Add twl6030 RTC support mfd: Add support for twl6030 irq framework mfd: Rename twl4030_ routines in twl-regulator.c mfd: Rename twl4030_ routines in rtc-twl.c mfd: Rename all twl4030_i2c* mfd: Rename twl4030* driver files to enable re-use mfd: Clarify twl4030 return value for read and write mfd: Add all twl4030 regulators to the twl4030 mfd driver mfd: Don't set mc13783 ADREFMODE for touch conversions mfd: Remove ezx-pcap defines for custom led gpio encoding mfd: Near complete mc13783 rewrite mfd: Remove build time warning for WM835x register default tables mfd: Force I2C to be built in when building WM831x mfd: Don't allow wm831x to be built as a module mfd: Fix incorrect error check for wm8350-core mfd: Fix twl4030 warning gpiolib: Implement gpio_to_irq() for wm831x mfd: Remove default selection of AB4500 ...
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: fix lh7a40x build ARM: fix sa1100 build ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq [ARM] pxa/zeus: default configuration for Arcom Zeus SBC. [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus [ARM] pxa/zeus: basic support for Arcom Zeus SBC [ARM] pxa/em-x270: fix usb hub power up/reset sequence PCMCIA: fix pxa2xx_lubbock modular build error ARM: RealView: Fix typo in the RealView/PBX Kconfig entry ARM: Do not allow the probing of the local timer ARM: Add an earlyprintk debug console
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (75 commits) NFS: Fix nfs_migrate_page() rpc: remove unneeded function parameter in gss_add_msg() nfs41: Invoke RECLAIM_COMPLETE on all new client ids SUNRPC: IS_ERR/PTR_ERR confusion NFSv41: Fix a potential state leakage when restarting nfs4_close_prepare nfs41: Handle NFSv4.1 session errors in the delegation recall code nfs41: Retry delegation return if it failed with session error nfs41: Handle session errors during delegation return nfs41: Mark stateids in need of reclaim if state manager gets stale clientid NFS: Fix up the declaration of nfs4_restart_rpc when NFSv4 not configured nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTID nfs41: nfs41_setup_state_renewal NFSv41: More cleanups NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING code NFSv41: Clean up slot table management NFSv41: Fix nfs4_proc_create_session nfs41: Invoke RECLAIM_COMPLETE nfs41: RECLAIM_COMPLETE functionality nfs41: RECLAIM_COMPLETE XDR functionality Cleanup some NFSv4 XDR decode comments ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
-
William Allen Simpson authored
In recent months, two different network projects erroneously strayed down the rw_lock path. Update the Documentation based upon comments by Eric Dumazet and Paul E. McKenney in those threads. Further updates await somebody else with more expertise. Changes: - Merged with extensive content by Stephen Hemminger. - Fix one of the comments by Linus Torvalds. Signed-off-by: William.Allen.Simpson@gmail.com Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hidetoshi Seto authored
It looks better to have a common function. No change in functionality. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <4B25FDDC.407@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Cyrill Gorcunov <gorcunov@openvz.org>
-
Cyrill Gorcunov authored
Add check if APIC is not disabled since thermal monitoring depends on it. As only apic gets disabled we should not try to install "thermal monitor" vector, print out that thermal monitoring is enabled and etc... Note that "Intel Correct Machine Check Interrupts" already has such a check. Also I decided to not add cpu_has_apic check into mcheck_intel_therm_init since even if it'll call apic_read on disabled apic -- it's safe here and allow us to save a few code bytes. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> LKML-Reference: <4B25FDC2.3020401@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
David Miller authored
Here, tvec->tv_usec is "unsigned int" not "unsigned long". Since the type is different on every platform, it's probably best to just use long printf formats and cast. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091213.235622.53363059.davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
This fixes the following breakage of the commit 75f1cdf1: - GART systems that don't AGP with broken BIOS and more than 4GB memory are forced to use swiotlb. They can allocate aperture by hand and use GART. - GART systems without GAP must disable GART on shutdown. - swiotlb usage is forced by the boot option, gart_iommu_hole_init() is not called, so we disable GART early_gart_iommu_check(). Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> LKML-Reference: <1260759135-6450-3-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-