- 18 Mar, 2007 3 commits
-
-
Linus Torvalds authored
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] hda-intel - Fix HDA buffer alignment [ALSA] hda-codec - Add model for HP Compaq d5750 [ALSA] hda-codec - Add support for MacBook Pro 1st generation [ALSA] version 1.0.14rc3 [ALSA] hda-codec - Add model for HP Compaq d5700 [ALSA] intel8x0 - Fix Oops at kdump crash kernel [ALSA] hda-codec - Fix speaker output on MacPro [ALSA] hda-codec - more systems for Analog Devices [ALSA] hda-intel - Fix codec probe with ATI contorllers [ALSA] hda-codec - Add suppoprt for Asus M2N-SLI motherboard [ALSA] intel8x0 - Fix speaker output after S2RAM [ALSA] ac97 - fix AD shared shared jack control logic [ALSA] soc - Fix dependencies in Kconfig files
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Use Kconfig.preempt
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config options ide: don't allow DMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO=n scc_pata: dependency fix jmicron: make ide jmicron driver play nice with libata ones ide: remove static prototypes from include/asm-mips/mach-au1x00/au1xxx_ide.h ide: au1xxx: fix use of mixed declarations and code cmd64x: fix recovery time calculation (take 3)
-
- 17 Mar, 2007 37 commits
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86: Export _proxy_pda for gcc 4.2 [PATCH] i386: Don't use the TSC in sched_clock if unstable [PATCH] x86-64: fix section mismatch warnings [PATCH] i386: Enforce GPLness of VMI ROM [PATCH] x86-64: wire up compat sched_rr_get_interval(2) [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig
-
David S. Miller authored
Signed-off-by:David S. Miller <davem@davemloft.net>
-
Bartlomiej Zolnierkiewicz authored
All modern distributions have been setting these options to "y" for ages. (additionally "n" cases have been obsoleted for few years). Therefore use DMA by default and remove CONFIG_IDEDMA_{ICS,PCI}_AUTO (also remove no longer needed CONFIG_IDEDMA_AUTO). This fixes DMA support for rare configurations where CONFIG_IDEDMA_{ICS,PCI}_AUTO was set to "n" but "hdparm -d 1" was used to enable DMA support and which were forced to PIO mode by "ide: don't allow DMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO=n" patch. There is no functionality loss because "ide=nodma" kernel option is still available. Cc: Patrick Horn <phrh@yahoo.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
For CONFIG_IDEDMA_{ICS,PCI}_AUTO=n and/or "ide=nodma" option the host/device are not programmed for DMA and it is also explicitly disabled by ide_set_dma() (->ide_dma_check returns "-1"). However the code responsible for manually enabling DMA ("hdparm -d 1") has a bug which results in DMA being erroneously enabled - ide_set_dma() incorrectly passes "0" return value to set_using_dma(). This may work if BIOS/firmware configured the host/device for DMA and chipset allows independent configuration of DMA/PIO modes but won't work after suspend and is generally unsafe on many chipsets (possibly including data corruption if the same registers are used for DMA/PIO timings). This patch fixes kernel bugzilla bug #8169 (piix host driver fixes for setting PIO mode exposed the problem described above). The side-effect of the fix is that some rare configuration may be forced to PIO mode when DMA mode was previously used - this is addressed by the next patch which removes CONFIG_IDEDMA_{PCI,ICS}_AUTO config option completely. Thanks goes out to Patrick Horn for reporting the issue, narrowing it down to the specific commit and testing the fix. Also thanks to Sergei Shtylyov for help in debugging the problem. Cc: Patrick Horn <phrh@yahoo.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: -
Kou Ishizaki authored
This patch fixes: * the dependency of scc_pata on BLK_DEV_IDEDMA_PCI * incorrect link to ide-core * move scc_pata from ide/ppc to ide/pci Signed-off-by:
Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by:
Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Al Viro <viro@ftp.linux.org.uk>, Signed-off-by:
-
Tejun Heo authored
When libata is configured, the device is configured such that SATA and PATA ports live in separate functions with different programming interfaces. pata_jmicron and ide jmicron drivers can drive only the PATA part. This patch makes jmicron match PCI class code such that it doesn't attach itself to the SATA part preventing the proper ahci driver from attaching. This change is suggested by Bartlomiej. Signed-off-by:
Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: justin@jmicron.com Signed-off-by:
-
Daniel Mack authored
This patch removes the static prototypes from the au1xxx_ide.h, some of them were not even implemented. Also, they caused build breakage since they differed from the functions actually implemented in drivers/ide/mips/au1xxx-ide.c. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Ralf Baechle authored
drivers/ide/mips/au1xxx-ide.c:684: warning: ISO C90 forbids mixed declarations and code Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Sergei Shtylyov authored
The driver wrongly takes the address setup time into account when calculating the PIO recovery time -- this leads to slight overclocking of the PIO modes 0 and 1 (so, the prayers failed to help, as usual :-). Rework the code to be calculating recovery clock count as a difference between the total cycle count and the active count (we don't need to calculate the recovery time itself since it's not specified for the PIO modes 0 to 2, and for modes 3 and 4 this formula gives enough recovery time anyway in the chip's supported PCI frequency range). This patch has been inspired by reading the datasheets and looking at what the libata driver does; it has been compile-tested only (as usual :-) but anyway, the new code gives the same or longer recovery times than the old one... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Thomas Gleixner authored
I finally found a dual core box, which survives suspend/resume without crashing in the middle of nowhere. Sigh, I never figured out from the code and the bug reports what's going on. The observed hangs are caused by a stale state transition of the clock event devices, which keeps the RCU synchronization away from completion, when the non boot CPU is brought back up. The suspend/resume in oneshot mode needs the similar care as the periodic mode during suspend to RAM. My assumption that the state transitions during the different shutdown/bringups of s2disk would go through the periodic boot phase and then switch over to highres resp. nohz mode were simply wrong. Add the appropriate suspend / resume handling for the non periodic modes. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV6]: ipv6_fl_socklist is inadvertently shared. [TCP]: Fix tcp_mem[] initialization. [NET]: Copy mac_len in skb_clone() as well [IPV4]: Do not disable preemption in trie_leaf_remove().
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Get DEBUG_PAGEALLOC working again.
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Kconfig: Move missplaced NR_CPUS default from SMTC to VSMP. [MIPS] Lockdep: Fix recursion bug. [MIPS] RTLX: Handle copy_*_user return values. [MIPS] RTLX: Protect rtlx_{read,write} with mutex. [MIPS] RTLX: Harden against compiler reordering and optimization. [MIPS] RTLX: Don't use volatile; it's fragile. [MIPS] Lasat: Downgrade 64-bit kernel from experimental to broken. [MIPS] Compat: Fix build if CONFIG_SYSVIPC is disabled. [CHAR] lcd: Fix two warnings. [MIPS] FPU ownership management & preemption fixes [MIPS] Check FCSR for pending interrupts, alternative version [MIPS] IP27, IP35: Fix warnings.
-
Thomas Gleixner authored
The maximum seconds value we can handle on 32bit is LONG_MAX. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Jeremy Fitzhardinge authored
Fix typo in sync_constant_test_bit()'s name, so sync_bitops.h is consistent with bitops.h Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Arnaud Patard (Rtp authored
The set_cs field of struct s3c24xx_spi is declared as returning a int but the value returned but set_cs is never fixed. Moreover, the default function for set_cs and the set_cs defintion in the platform data are returning void. I'm proposing to change the prototype to void (*set_cs)(...). By doing this, I'm also fixing 2 build warnings: drivers/spi/spi_s3c24xx.c: In function 's3c24xx_spi_probe': drivers/spi/spi_s3c24xx.c:330: warning: assignment from incompatible pointer type drivers/spi/spi_s3c24xx.c:335: warning: assignment from incompatible pointer type Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
James Bottomley authored
This bug was seen on ppc64, but it could have occurred on any architecture with a page size of 64k or above. The problem is that in fs/binfmt_elf.c:randomize_stack_top() randomizes the stack to within 0x7ff pages. On 4k page machines, this is 8MB; on 64k page boxes, this is 128MB. The problem is that the new binary layout (selected in arch_pick_mmap_layout) places the mapping segment 128MB or the stack rlimit away from the top of the process memory, whichever is larger. If you chose an rlimit of less than 128MB (most defaults are in the 8Mb range) then you can end up having your entire stack randomized away. The fix is to make randomize_stack_top() only steal at most 8MB, which this patch does. However, I have to point out that even with this, your stack rlimit might not be exactly what you get if it's > 128MB, because you're still losing the random offset of up to 8MB. The true fix should be to leave an explicit gap for the randomization plus a buffer when determining mmap_base, but that would involve fixing all the architectures. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Zilvinas Valinskas authored
Fixes a bogus lockdep warning which causes lockdep to disable itself. Acked-by:
-
Ankita Garg authored
Looking at oom_kill.c, found that the intention to not kill the selected process if any of its children/siblings has OOM_DISABLE set, is not being met. Signed-off-by:
Ankita Garg <ankita@in.ibm.com> Acked-by:
Nick Piggin <npiggin@suse.de> Acked-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
-
Johannes Berg authored
Remove the misleading "Presently only useful on the IA-64 platform" text from the EFI partition Kconfig. EFI partitions are also used by Apple on their Intel-based machines and thus you need EFI partition support if you (for example) want to attach such a machine in target disk mode. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
Ingo Molnar authored
Testing of -rt by IBM uncovered a locking bug in wake_futex_pi(): the PI state needs to be locked before we access it. Signed-off-by:
-
Marcel Selhorst authored
Signed-off-by:
Marcel Selhorst <tpm@selhorst.net> Signed-off-by:
-
Bernhard Walle authored
Initialise the SAK member of the vc_cons variable on all virtual terminals, not only the first one. This prevents an oops when trying Sysrq-C on e.g. the second virtual terminal: kernel BUG at kernel/workqueue.c:212! invalid opcode: 0000 [1] SMP CPU 0 Modules linked in: i915 drm deflate zlib_deflate twofish twofish_common serpent blowfish des ce Pid: 0, comm: swapper Not tainted 2.6.21-rc3-default #15 RIP: 0010:[<ffffffff8028c955>] [<ffffffff8028c955>] queue_work+0x32/0x51 RSP: 0018:ffffffff805fada8 EFLAGS: 00010013 RAX: ffffffff80683f38 RBX: ffffffff804ae700 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff80683f30 RDI: ffff81000134a840 RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000002 R10: ffffffff805990e0 R11: ffff810037f4c0f0 R12: 000000000000006b R13: ffff81007aa23000 R14: 0000000000000001 R15: 0000000000000096 FS: 0000000000000000(0000) GS:ffffffff804d8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00002b72026e9000 CR3: 0000000079175000 CR4: 00000000000006e0 Process swapper (pid: 0, threadinfo ffffffff8059e000, task ffffffff80490840) Stack: 0000000000000096 ffffffff803635db ffffffff805fadf8 0000000000000001 ffff8100013c2e40 0000000000000025 ffff81007c931c00 ffff81007aa23000 0000000000000001 ffffffff8035e3ee 0000000000000092 ffff810037cc8000 Call Trace: <IRQ> [<ffffffff803635db>] __handle_sysrq+0x98/0x129 [<ffffffff8035e3ee>] kbd_event+0x32e/0x56a [<ffffffff8037d502>] input_event+0x422/0x44a [<ffffffff80381d71>] atkbd_interrupt+0x449/0x503 [<ffffffff8037a42d>] serio_interrupt+0x37/0x6f [<ffffffff8037affb>] i8042_interrupt+0x1f4/0x20a [<ffffffff8026bd20>] smp_send_timer_broadcast_ipi+0x2d/0x4e [<ffffffff8020eee5>] handle_IRQ_event+0x25/0x53 [<ffffffff802a924c>] handle_edge_irq+0xe4/0x128 [<ffffffff802562ac>] call_softirq+0x1c/0x28 [<ffffffff802632eb>] do_IRQ+0x6c/0xd3 [<ffffffff8024f4e7>] mwait_idle+0x0/0x45 [<ffffffff80255631>] ret_from_intr+0x0/0xa <EOI> [<ffffffff80248a4d>] datagram_poll+0x0/0xc8 [<ffffffff8024f529>] mwait_idle+0x42/0x45 [<ffffffff80242c05>] cpu_idle+0x8b/0xae [<ffffffff805a8779>] start_kernel+0x2b9/0x2c5 [<ffffffff805a815e>] _sinittext+0x15e/0x162 Code: 0f 0b eb fe 48 8b 07 48 63 d2 48 f7 d0 48 8b 3c d0 e8 13 ff RIP [<ffffffff8028c955>] queue_work+0x32/0x51 RSP <ffffffff805fada8> Kernel panic - not syncing: Aiee, killing interrupt handler! Signed-off-by:
Bernhard Walle <bwalle@suse.de> Acked-by:
Eric Biederman <ebiederm@xmission.com> Cc: <stable@kernel.org> Signed-off-by:
-
Stefano Brivio authored
We need vid_which_vrm and vid_from_reg in the w83793 module. Signed-off-by:
Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Trond Myklebust authored
Looks like we need a check in nfs_getattr() for a regular file. It makes no sense to call nfs_sync_mapping_range() on anything else. I think that should fix your problem: it will stop the NFS client from interfering with dirty pages on that inode's mapping. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by:
Olof Johansson <olof@lixom.net> Cc: <stable@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
The current NFS client congestion logic is severly broken, it marks the backing device congested during each nfs_writepages() call but doesn't mirror this in nfs_writepage() which makes for deadlocks. Also it implements its own waitqueue. Replace this by a more regular congestion implementation that puts a cap on the number of active writeback pages and uses the bdi congestion waitqueue. Also always use an interruptible wait since it makes sense to be able to SIGKILL the process even for mounts without 'intr'. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
suzuki authored
The only error code which comes from the partition checkers is -1, when they finds an EIO. As per the discussion, ENOMEM values were ignored, as they might scare the users. So, with the current code, we end up returning -1 and not EIO for the ioctl() calls. Which doesn't give any clue to the user of what went wrong. Signed-off-by:
Suzuki K P <suzuki@in.ibm.com> Signed-off-by:
-
Andrew Johnson authored
When the console is in VT_AUTO+KD_GRAPHICS mode, switching to the SUSPEND_CONSOLE fails, resulting in vt_waitactive() waiting indefinitely or until the task is interrupted. This patch tests if a console switch can occur in set_console() and returns early if a console switch is not possible. [akpm@linux-foundation.org: cleanup] Signed-off-by:
Andrew Johnson <ajohnson@intrinsyc.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Vasily Averin authored
smbfs allocates rq_trans2buffer to handle server's multi transaction2 response messages. As struct smb_request may be reused, rq_trans2buffer is freed before each new request. However if last servers's response is not multi but single trans2 message then new rq_trans2buffer is not allocated but last smb_rput still tries to free it again. To prevent this issue rq_trans2buffer pointer should be set to NULL after kfree. Signed-off-by:
Vasily Averin <vvs@sw.ru> Signed-off-by:
-
Geert Uytterhoeven authored
Frame buffer device drivers that cannot be built as modules must depend on `FB = y'. Correct the 3 remaining offenders. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Michael Halcrow authored
ecryptfs_d_release() first dereferences a pointer (via ecryptfs_dentry_to_lower()) and then afterwards checks to see if the pointer it just dereferenced is NULL (via ecryptfs_dentry_to_private()). This patch moves all of the work done on the dereferenced pointer inside a block governed by the condition that the pointer is non-NULL. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Thomas Gleixner authored
commit f4304ab2 (HZ free NTP) moved the access to wall_to_monotonic in hrtimer_get_softirq_time() out of the xtime_lock protection. Move it back into the seq_lock section. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Atsushi Nemoto authored
Prevents a potential oops with CONFIG_SPI_DEBUG given flakey hardware or incorrect configuration. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Thomas Gleixner authored
hrtimer_forward() does not check for the possible overflow of timer->expires. This can happen on 64 bit machines with large interval values and results currently in an endless loop in the softirq because the expiry value becomes negative and therefor the timer is expired all the time. Check for this condition and set the expiry value to the max. expiry time in the future. The fix should be applied to stable kernel series as well. Signed-off-by:
-
Antonino A. Daplas authored
SavagePrintRegs() requires struct savagefb_par. Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Antonino A. Daplas authored
This is a hack that seems to kick start the 2D engine of the Savage IX in some Toshiba laptops. Without this, the laptop starts with a black screen and occasionally crashes X. Signed-off-by:
-
Ondrej Zajicek authored
Pixclock setting in sstfb didn't work with my Voodoo 2 card with ICS 5342 DAC (this DAC requires two consecutive writes to one of its registers to program pixclock - maybe first write merged with second). Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by:
-
