* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits)
  uwb: wrong sizeof argument in mac address compare
  uwb: don't use printk_ratelimit() so often
  uwb: use kcalloc where appropriate
  uwb: use time_after() when purging stale beacons
  uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems
  uwb: add entries in the MAINTAINERS file
  uwb: depend on EXPERIMENTAL
  wusb: wusb-cbaf (CBA driver) sysfs ABI simplification
  uwb: document UWB and WUSB sysfs files
  uwb: add symlinks in sysfs between radio controllers and PALs
  uwb: dont tranmit identification IEs
  uwb: i1480/GUWA100U: fix firmware download issues
  uwb: i1480: remove MAC/PHY information checking function
  uwb: add Intel i1480 HWA to the UWB RC quirk table
  uwb: disable command/event filtering for D-Link DUB-1210
  uwb: initialize the debug sub-system
  uwb: Fix handling IEs with empty IE data in uwb_est_get_size()
  wusb: fix bmRequestType for Abort RPipe request
  wusb: fix error path for wusb_set_dev_addr()
  wusb: add HWA host controller driver
  ...

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: check for platform_get_irq() return value in sm501
  mfd: use pci_ioremap_bar() in sm501
  mfd: Don't store volatile bits in WM8350 register cache
  mfd: don't export wm3850 static functions
  mfd: twl4030-gpio driver
  mfd: rtc-twl4030 driver
  mfd: twl4030 IRQ handling update

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
  IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
  IPoIB: Set netdev offload features properly for child (VLAN) interfaces
  IPoIB: Clean up ethtool support
  mlx4_core: Add Ethernet PCI device IDs
  mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC
  mlx4_core: Multiple port type support
  mlx4_core: Ethernet MAC/VLAN management
  mlx4_core: Get ethernet MTU and default address from firmware
  mlx4_core: Support multiple pre-reserved QP regions
  Update NetEffect maintainer emails to Intel emails
  RDMA/cxgb3: Remove cmid reference on tid allocation failures
  IB/mad: Use krealloc() to resize snoop table
  IPoIB: Always initialize poll_timer to avoid crash on unload
  IB/ehca: Don't allow creating UC QP with SRQ
  mlx4_core: Add QP range reservation support
  RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_via: load DEVICE register when CTL changes
  libata: set device class to NONE if phys_offline
  libata-eh: fix slave link EH action mask handling
  libata: transfer EHI control flags to slave ehc.i
  libata-sff: fix ata_sff_post_internal_cmd()
  libata: initialize port_task when !CONFIG_ATA_SFF

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] clps711x: add sparsemem definitions
  [ARM] 5315/1: Fix section mismatch warning (sa1111)
  [ARM] Orion: activate workaround for 88f6183 SPI clock erratum
  [ARM] Orion: instantiate the dsa switch driver
  [ARM] mv78xx0: force link speed/duplex on eth2/eth3
  [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c
  [ARM] balance parenthesis in header file
  [ARM] pxa: fix trizeps PCMCIA build
  [ARM] pxa: fix trizeps defconfig
  [ARM] dmabounce requires ZONE_DMA
  [ARM] 5303/1: period_cycles should be greater than 1
  [ARM] 5310/1: Fix cache flush functions for ARMv4
  [ARM] pxa: fix 3bca103a
  [ARM] pxa: fix redefinition of NR_IRQS
  [ARM] S3C24XX: Fix redefine of DEFINE_TIMER() in s3c24xx pwm-clock.c
  [ARM] S3C2443: Fix HCLK rate
  [ARM] S3C24XX: Serial driver debug depends on DEBUG_LL
  [ARM] S3C24XX: pwm-clock set_parent mask fix

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (41 commits)
  [IA64] Fix annoying IA64_TR_ALLOC_MAX message.
  [IA64] kill sys32_pipe
  [IA64] remove sys32_pause
  [IA64] Add Variable Page Size and IA64 Support in Intel IOMMU
  ia64/pv_ops: paravirtualized instruction checker.
  ia64/xen: a recipe for using xen/ia64 with pv_ops.
  ia64/pv_ops: update Kconfig for paravirtualized guest and xen.
  ia64/xen: preliminary support for save/restore.
  ia64/xen: define xen machine vector for domU.
  ia64/pv_ops/xen: implement xen pv_time_ops.
  ia64/pv_ops/xen: implement xen pv_irq_ops.
  ia64/pv_ops/xen: define the nubmer of irqs which xen needs.
  ia64/pv_ops/xen: implement xen pv_iosapic_ops.
  ia64/pv_ops/xen: paravirtualize entry.S for ia64/xen.
  ia64/pv_ops/xen: paravirtualize ivt.S for xen.
  ia64/pv_ops/xen: paravirtualize DO_SAVE_MIN for xen.
  ia64/pv_ops/xen: define xen paravirtualized instructions for hand written assembly code
  ia64/pv_ops/xen: define xen pv_cpu_ops.
  ia64/pv_ops/xen: define xen pv_init_ops for various xen initialization.
  ia64/pv_ops/xen: elf note based xen startup.
  ...

VIA controllers clear DEVICE register when IEN changes.  Make sure
DEVICE is updated along with CTL.

This change is separated from Joseph Chan's larger patch.

  http://thread.gmane.org/gmane.linux.kernel.commits.mm/40640Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Reset methods don't have access to phys link status for slave links
and may incorrectly indicate device presence causing unnecessary probe
failures for unoccupied links.  This patch clears device class to NONE
during post-reset processing if phys link is offline.

As on/offlineness semantics is strictly defined and used in multiple
places by the core layer, this won't change behavior for drivers which
don't use slave links.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Slave link action mask is transferred to master link and all the EH
actions are taken by the master link.  ata_eh_about_to_do() and
ata_eh_done() are called with ATA_EH_ALL_ACTIONS to clear the slave
link actions during transfer.  This always sets ATA_PFLAG_RECOVERED
flag causing spurious "EH complete" messages.

Don't set ATA_PFLAG_RECOVERED for slave link actions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used to control the behavior
of EH.  As only the master link is visible outside EH, these flags are
set only for the master link although they should also apply to the
slave link, which causes spurious EH messages during probe and
suspend/resume.

This patch transfers those two flags to slave ehc.i before performing
slave autopsy and reporting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ata_sff_post_internal_cmd() needs to grab port lock before calling
ata_bmdma_stop() and also need to clear hsm_task_state.  Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ap->port_task was not initialized if !CONFIG_ATA_SFF later triggering
lockdep warning.  Make sure it's initialized.

Reported by Larry Finger.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Since the ehca device driver does not support dynamic memory add and
remove operations, the driver must explicitly reject such requests in
order to prevent unpredictable behaviors related to existing memory
regions that cover all of memory being used by InfiniBand protocols in
the kernel.

The solution (for now at least) is to add a memory notifier to the
ehca device driver and if a request for dynamic memory add or remove
comes in, ehca will always reject it.  The user can add or remove
memory by hot-removing the ehca adapter, performing the memory
operation, and then hot-adding the ehca adapter back.
Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Because ehca adapters can differ in the maximum number of QPs and CQs
we have to save the maximum number of these ressources per adapter and
not globally per ehca driver. This fix introduces 2 new members to the
shca structure to store the maximum value for QPs and CQs per adapter.

The module parameters are now used as initial values for those
variables.  If a user selects an invalid number of CQs or QPs we don't
print an error any longer, instead we will inform the user with a
warning and set the values to the respective maximum supported by the
HW.
Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Child devices were created without any offload features set, fix this by
moving the code that computes the features into generic function which is
now called through non-child and child device creation.
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>

-- v1 has a bug where the 'result' flag in ipoib_vlan_add may be used uninitialized
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add a get_rx_csum method.  Remove the driver's own get_tso method, as
the ethtool kernel code uses the default one if nothing is provided.
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The Mellanox ConnectX can operate as an InfiniBand adapter, as an
Ethernet NIC, or as a Fibre Channel (FC) HBA.  The kernel has a
low-level driver, mlx4_core, which handles multiplexing access to the
device, and there is also already an InfiniBad driver, mlx4_ib.

This patch adds a new driver, mlx4_en, which implements a standard
Ethernet NIC driver.
Signed-off-by: Liran Liss <liranl@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Multi-protocol adapters support different port types.  Each consumer
of mlx4_core queries for supported port types; in particular mlx4_ib
can no longer assume that all physical ports belong to it.  Port type
is configured through a sysfs interface.  When the type of a port is
changed, all mlx4 interfaces are unregistered, and then registered
again with the new port types.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add support for managing MAC and VLAN filters for each port.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Get maximum ethernet MTU and default MAC address from the firmware
QUERY_DEV_CAP command.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

For ethernet support, we need to reserve QPs for the ethernet and
fibre channel driver.  The QPs are reserved at the end of the QP
table.  (This way we assure that they are aligned to their size)

We need to consider these reserved ranges in bitmap creation, so we
extend the mlx4 bitmap utility functions to allow reserved ranges at
both the bottom and the top of the range.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

sm501_devdata->irq is unsigned, while platform_get_irq() returns a
signed int.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

Use the newly introduced pci_ioremap_bar() function in drivers/mfd.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

This makes the contents of the cache clearer and fixes incorrect
initialisation of the cache for partially volatile registers.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

October 10th linux-next build (powerpc allyesconfig) failed like this:

drivers/mfd/wm8350-core.c:1131: error: __ksymtab_wm8350_create_cache causes a section type conflict

Caused by commit 89b4012b ("mfd: Core
support for the WM8350 AudioPlus PMIC"). wm8350_create_cache is not used
elsewhere, so remove the EXPORT_SYMBOL.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

This adds basic support for the GPIOs in the twl4030 power management
chip.  That includes two open drain LED drivers, and the use of GPIO-0
(and GPIO-1) as MMC/SD card detect switches which can control whether
the VMMC1 (and VMMC2) regulators are active.

This version of the code has a debounce call that will probably be
replaced before long, when a more generic interface exists.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

This adds a driver for the RTC inside the TWL4030 multi-function device.
It's a fairly basic RTC, with a wake-capable alarm.

Note that many of the pre-release Overo boards now in circulation can't
effectively use this RTC, because of a wiring error that puts its TWL
chip into "secure" mode.  (As in "secure yourself against tampering".)
This isn't an issue on other OMAP3 boards now supported in mainline,
such as Beagle and Labrador.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

- Move it into a separate file; clean and streamline it
 - Restructure the init code for reuse during secondary dispatch
 - Support both levels (primary, secondary) of IRQ dispatch
 - Use a workqueue for irq mask/unmask and trigger configuration

Code for two subchips currently share that secondary handler code.
One is the power subchip; its IRQs are now handled by this core,
courtesy of this patch.  The other is the GPIO module, which will
be supported through a later patch.

There are also minor changes to the header file, mostly related
to GPIO support; nothing yet in mainline cares about those.  A
few references to OMAP-specific symbols are disabled; when they
can all be removed, the TWL4030 support ceases being OMAP-specific.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

Fix the edb7211_defconfig build errors.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch fixes the section mismatch warning from
sa1111.o at buildtime.

  CC      arch/arm/common/sa1111.o
  LD      arch/arm/common/built-in.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x87f4): Section mismatch in reference from the function sa1111_probe() to the function .devinit.text:sa1110_mb_enable()
The function sa1111_probe() references
the function __devinit sa1110_mb_enable().
This is often because sa1111_probe lacks a __devinit
annotation or the annotation of sa1110_mb_enable is wrong.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit f06febc9 ("timers: fix itimer/
many thread hang") introduced a new task_cputime interface and
subsequently only converted binfmt_elf over to it.  This results in the
build for binfmt_elf_fdpic blowing up given that p->signal->{u,s}time
have disappeared from underneath us.

Apply the same trivial fix from binfmt_elf to binfmt_elf_fdpic.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Removed duplicated #include <linux/vmalloc.h> in mm/vmalloc.c and
"internal.h" in mm/memory.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We're trying to keep the !CONFIG_SHMEM tiny-shmem.c (using ramfs without
swap) in synch with CONFIG_SHMEM shmem.c (and mpm is preparing patches
to combine them).  I was glad to see EXPORT_SYMBOL_GPL(shmem_file_setup)
go into shmem.c, but why not support DRM-GEM when !CONFIG_SHMEM too?
But caution says still depend on MMU, since !CONFIG_MMU is.. different.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 9b7530cc ("i915: cleanup coding
horrors in i915_gem_gtt_pwrite()")

broke the i386 build for CONFIG_HIGHMEM=y.

Caught by automatic testing http://www.tglx.de/autoqa-logs/000137-0006-0001.logSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
[ My bad. It's the same patch I sent out earlier, nobody noticed then either.. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc doesn't use the generic WARN_ON infrastructure.  The newly
introduced WARN() as a result didn't print the message, this patch adds
the printk for this specific case.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes

  kernel/kexec.c: In function 'crash_save_vmcoreinfo_init':
  kernel/kexec.c:1374: error: 'vmlist' undeclared (first use in this function)
  kernel/kexec.c:1374: error: (Each undeclared identifier is reported only once
  kernel/kexec.c:1374: error: for each function it appears in.)
  kernel/kexec.c:1410: error: invalid use of undefined type 'struct vm_struct'
  make[1]: *** [kernel/kexec.o] Error 1
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>