- 10 Aug, 2009 4 commits
-
-
Trond Myklebust authored
-
Bartlomiej Zolnierkiewicz authored
Subject: [PATCH] nfs: remove superfluous BUG_ON()s Remove duplicated BUG_ON()s from nfs[4]_create_server() (we make the same checks earlier in both functions). This takes care of the following entries from Dan's list: fs/nfs/client.c +1078 nfs_create_server(47) warning: variable derefenced before check 'server->nfs_client' fs/nfs/client.c +1079 nfs_create_server(48) warning: variable derefenced before check 'server->nfs_client->rpc_ops' fs/nfs/client.c +1363 nfs4_create_server(43) warning: variable derefenced before check 'server->nfs_client' fs/nfs/client.c +1364 nfs4_create_server(44) warning: variable derefenced before check 'server->nfs_ Reported-by: Dan Carpenter <error27@gmail.com> Cc: corbet@lwn.net Cc: eteo@redhat.com Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Peter Staubach authored
Hi. I have a proposal for possibly resolving this issue. I believe that this situation occurs due to the way that the Linux NFS client handles writes which modify partial pages. The Linux NFS client handles partial page modifications by allocating a page from the page cache, copying the data from the user level into the page, and then keeping track of the offset and length of the modified portions of the page. The page is not marked as up to date because there are portions of the page which do not contain valid file contents. When a read call comes in for a portion of the page, the contents of the page must be read in the from the server. However, since the page may already contain some modified data, that modified data must be written to the server before the file contents can be read back in the from server. And, since the writing and reading can not be done atomically, the data must be written and committed to stable storage on the server for safety purposes. This means either a FILE_SYNC WRITE or a UNSTABLE WRITE followed by a COMMIT. This has been discussed at length previously. This algorithm could be described as modify-write-read. It is most efficient when the application only updates pages and does not read them. My proposed solution is to add a heuristic to decide whether to do this modify-write-read algorithm or switch to a read- modify-write algorithm when initially allocating the page in the write system call path. The heuristic uses the modes that the file was opened with, the offset in the page to read from, and the size of the region to read. If the file was opened for reading in addition to writing and the page would not be filled completely with data from the user level, then read in the old contents of the page and mark it as Uptodate before copying in the new data. If the page would be completely filled with data from the user level, then there would be no reason to read in the old contents because they would just be copied over. This would optimize for applications which randomly access and update portions of files. The linkage editor for the C compiler is an example of such a thing. I tested the attached patch by using rpmbuild to build the current Fedora rawhide kernel. The kernel without the patch generated about 269,500 WRITE requests. The modified kernel containing the patch generated about 261,000 WRITE requests. Thus, about 8,500 fewer WRITE requests were generated. I suspect that many of these additional WRITE requests were probably FILE_SYNC requests to WRITE a single page, but I didn't test this theory. The difference between this patch and the previous one was to remove the unneeded PageDirty() test. I then retested to ensure that the resulting system continued to behave as desired. Thanx... ps Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Make NFS a bit more friendly to NUMA and memory hot removal... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 09 Aug, 2009 30 commits
-
-
Chuck Lever authored
Clean up: provide documenting comments for the functions in net/sunrpc/timer.c. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
After a bind completes, update the transport instance's address strings so debugging messages display the current port the transport is connected to. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
At some point, I recall that rpc_pipe_fs used RPC_DISPLAY_ALL. Currently there are no uses of RPC_DISPLAY_ALL outside the transport modules themselves, so we can safely get rid of it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Give the "addr" and "port" field less ambiguous names. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Replace PROC macro with open coded C99 structure initializers to improve readability. The rpcbind v4 GETVERSADDR procedure is never sent by the current implementation, so it is not copied to the new structures. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Replace the open-coded decode logic for PMAP_GETPORT/RPCB_GETADDR with an xdr_stream-based implementation, similar to what NFSv4 uses, to protect against buffer overflows. The new implementation also checks that the incoming port number is reasonable. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Replace the open-coded decode logic for rpcbind UNSET results with an xdr_stream-based implementation, similar to what NFSv4 uses, to protect against buffer overflows. The new function is unused for the moment. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Replace the open-coded encode logic for rpcbind arguments with an xdr_stream-based implementation, similar to what NFSv4 uses, to better protect against buffer overflows. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
In write_failover_ip(), replace the sscanf() with a call to the common sunrpc.ko presentation address parser. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Use shared rpc_set_port() function instead of nlm_clear_port(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Use the common routine now provided in sunrpc.ko for parsing mount addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: In addition to using the new generic rpc_ntop() and rpc_get_port() functions, have the RPC client compute the presentation address buffer sizes dynamically using kstrdup(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
RPC universal address generation is currently done in several places: rpcb_clnt.c, nfs4proc.c xprtsock.c, and xprtrdma.c. Remove the redundant cases that convert a socket address to a universal address. The nfs4proc.c case takes a pre-formatted presentation address string, not a socket address, so we'll leave that one. Because the new uaddr constructor uses the recently introduced rpc_ntop(), it now supports proper "::" shorthanding for IPv6 addresses. This allows the kernel to register properly formed universal addresses with the local rpcbind service, in _all_ cases. The kernel can now also send properly formed universal addresses in RPCB_GETADDR requests, and support link-local properly when encoding and decoding IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Introduce a set of functions in the kernel's RPC implementation for converting between a socket address and either a standard presentation address string or an RPC universal address. The universal address functions will be used to encode and decode RPCB_FOO and NFSv4 SETCLIENTID arguments. The other functions are part of a previous promise to deliver shared functions that can be used by upper-layer protocols to display and manipulate IP addresses. The kernel's current address printf formatters were designed specifically for kernel to user-space APIs that require a particular string format for socket addresses, thus are somewhat limited for the purposes of sunrpc.ko. The formatter for IPv6 addresses, %pI6, does not support short-handing or scope IDs. Also, these printf formatters are unique per address family, so a separate formatter string is required for printing AF_INET and AF_INET6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: To make subsequent patches cleaner, move the XDR data type size macros to the top of the file (similar to nfs4xdr.c) first. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Replace the single-integer definition of RPCBIND_MAXUADDRLEN with a definition that is based on previously defined address string sizes, and document the way this maximum is calculated. Also provide a separate macro for the size of the port number extension. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Commit a14017db added support in the kernel's NFS mount client to decode the authentication flavor list returned by mountd. The NFS client can now use this list to determine whether the authentication flavor requested by the user is actually supported by the server. Note we don't actually negotiate the security flavor if none was specified by the user. Instead, we try to use AUTH_SYS, and fail if the server does not support it. This prevents us from negotiating an inappropriate security flavor (some servers list AUTH_NULL first). If the server does not support AUTH_SYS, the user must provide an appropriate security flavor by specifying the "sec=" mount option. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Previous logic in the NFS mount parsing code path assumed auth_flavor_len was set to zero for simple authentication flavors (like AUTH_UNIX), and 1 for compound flavors (like AUTH_GSS). At some earlier point (maybe even before the option parsers were merged?) specific checks for auth_flavor_len being zero were removed from the functions that validate the mount option that sets the mount point's authentication flavor. Since we are populating an array for authentication flavors, the auth_flavor_len should always be set to the number of flavors. Let's eliminate some cleverness here, and prepare for new logic that needs to know the number of flavors in the auth_flavors[] array. (auth_flavors[] is an array because at some point we want to allow a list of acceptable authentication flavors to be specified via the sec= mount option. For now it remains a single element array). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
After certain failure modes of an NFS mount, an NFS client should send a MOUNTPROC_UMNT request to remove the just-added mount entry from the server's mount table. While no-one should rely on the accuracy of the server's mount table, sending a UMNT is simply being a good internet neighbor. Since NFS mount processing is handled in the kernel now, we will need a function in the kernel's mountd client that can post a MOUNTRPC_UMNT request, in order to handle these failure modes. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
The new minorversion= mount option (commit 3fd5be9e) was merged at the same time as the recent sloppy parser fixes (commit a5a16bae), so minorversion= still uses the old value parsing logic. If the minorversion= option specifies a bogus value, it should fail with "bad value" not "bad option." Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Tighten up the validity checking in param_set_port: check for NULL pointers. Ensure that the option shows up on 'modinfo' output. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Parameters like the minimum reserved port, and the number of slot entries should really be module parameters rather than sysctls. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
We don't want to cause rpciod to hang... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
If the NFSv4 server doesn't support a POSIX attribute, the generic NFS code needs to know that, so that it don't keep trying to poll for it. However, by the same count, if the NFSv4 server does support that attribute, then we should ensure that the inode metadata is appropriately labelled as being untrusted. For instance, if we don't know the correct value of the file's uid, we should certainly not be caching ACLs or ACCESS results. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
If the server is broken, then retrying forever won't fix it. We should just give up after a while, and return an error to the user. We set the number of retries to 10 for now... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Roel Kluin authored
Ensure that index i remains within array mnt_errtbl[] and mnt3_errtbl[]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 Aug, 2009 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fix oops on disconnect in cdc-acm USB: storage: include Prolific Technology USB drive in unusual_devs list USB: ftdi_sio: add product_id for Marvell OpenRD Base, Client USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial converter cable USB: EHCI: fix counting of transaction error retries USB: EHCI: fix two new bugs related to Clear-TT-Buffer USB: usbfs: fix -ENOENT error code to be -ENODEV USB: musb: fix the nop registration for OMAP3EVM USB: devio: Properly do access_ok() checks USB: pl2303: New vendor and product id
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: rspiusb: Fix buffer overflow staging: add dependencies on PCI for drivers that require it Staging: rtl8192su: fix build error Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API Staging: rt2870: Add USB ID for Linksys, Planex Communications, Belkin
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits) drm/i915: Fix read outside array bounds in restoring the SWF10 range. drm/i915: Use our own workqueue to avoid wedging the system along with the GPU. drm/i915: Add support for dual-channel LVDS on 8xx. drm/i915: Return disconnected for SDVO DVI when there's no digital EDID. drm/i915: Choose real sdvo output according to result from detection drm/i915: Set preferred mode for integrated TV according to TV format drm/i915: fix 845G FIFO size & burst length drm/i915: fix VGA detect on IGDNG drm/i915: Add eDP support on IGDNG mobile chip drm/i915: enable DisplayPort support on IGDNG drm/i915: Fix channel ending action for DP aux transaction drm/i915: fix issue in display pipe setup on IGDNG drm/i915: disable VGA plane reliably drm/I915: Fix offset to DVO timings in LVDS data drm/i915: hdmi detection according by reading edid drm/i915: correct self-refresh calculation in "everything off" case drm/i915: handle FIFO oversubsription correctly drm/i915: FIFO watermark calculation fixes drm/i915: ignore lvds on AOpen Mini PC MP-915 drm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix balancing oops when invalidate_inode_pages2 returns EBUSY Btrfs: correct error-handling zlib error handling Btrfs: remove superfluous NULL pointer check in btrfs_rename() Btrfs: make sure the async caching thread advances the key Btrfs: fix btrfs_remove_from_free_space corner case
-
git://git.kernel.org/pub/scm/linux/kernel/git/hch/xfs-icache-racesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/hch/xfs-icache-races: xfs: fix freeing of inodes not yet added to the inode cache vfs: add __destroy_inode vfs: fix inode_init_always calling convention
-
- 07 Aug, 2009 1 commit
-
-
Roel Kluin authored
usb_buffer_map_sg() may return -1. This will result in a read from pdx->PixelUrb[frameInfo][-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-