- 26 Apr, 2007 40 commits
-
-
Arnaldo Carvalho de Melo authored
For the cases where the transport header is being set to a offset from skb->data. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can later turn skb->h.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple cases: skb->h.raw = skb->data; skb->h.raw = {skb_push|[__]skb_pull}() The next ones will handle the slightly more "complex" cases. Signed-off-by: -
Arnaldo Carvalho de Melo authored
Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: -
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Stephen Hemminger authored
Use logic operations rather than memcmp() to compare destination address with link local multicast addresses. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the common sequence "skb->nh.iph->ihl * 4", removing a good number of open coded skb->nh.iph uses, now to go after the rest... Just out of curiosity, here are the idioms found to get the same result: skb->nh.iph->ihl << 2 skb->nh.iph->ihl<<2 skb->nh.iph->ihl * 4 skb->nh.iph->ihl*4 (skb->nh.iph)->ihl * sizeof(u32) Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We can't access skb->nh.raw directly anymore, it will become an offset. Signed-off-by:
-
Stephen Hemminger authored
Show what protocols are bound to what packet types in /proc/net/ptype Uses kallsyms to decode function pointers if possible. Example: Type Device Function ALL eth1 packet_rcv_spkt+0x0 0800 ip_rcv+0x0 0806 arp_rcv+0x0 86dd :ipv6:ipv6_rcv+0x0 Signed-off-by:
-
Stephen Hemminger authored
The seq_file operations stuff can be marked constant to get it out of dirty cache. Signed-off-by:
-
Stephen Hemminger authored
For Eric, mark packet type and network device watermarks as read mostly. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the cases where the network header is being set to a offset from skb->data. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the quite common 'skb->nh.raw - skb->data' sequence. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Setting it to skb->h.raw, which is valid, in the (to become) old pointer based world order and in the new world of offset based layer headers. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Now related to this form: skb->nh.ipv6h = (struct ipv6hdr *)skb_put(skb, length); That, as the others, is done when skb->tail is still equal to skb->data, making the conversion to skb_reset_network_header possible. Also one more case equivalent to skb->nh.raw = skb->data, of this form: iph = (struct ipv6hdr *)skb->data; <SNIP> skb->nh.ipv6h = iph; Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Some more cases where skb->nh.iph was being set that were converted to using skb_reset_network_header. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
boot_pkt->iph is the first member, that is at skb->data, so just use skb_reset_network_header(). Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
This time of the type: skb->nh.iph = (struct iphdr *)skb->data; That is completely equivalent to: skb->nh.raw = skb->data; Wonder why people love casts... :-) Signed-off-by:
-
Arnaldo Carvalho de Melo authored
It returns skb->data, so we can just use skb_reset_network_header after it. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
But only in the cases where its a newly allocated skb, i.e. one where skb->tail is equal to skb->data, or just after skb_reserve, where this requirement is maintained. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
skb_push updates and returns skb->data, so we can just call skb_reset_network_header after the call to skb_push. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
nh.ipv6h is there exactly for this reason! Use it while it exists ;-) Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For consistency with all the other skb->nh.raw accessors. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For consistency with all the other skb->nh.raw accessors. Also do some really obvious simplifications in pppoe_recvmsg, well the kfree_skb one is not so obvious, but free() and kfree() have the same behaviour (hint :-) ). Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We'll have skb_reset_network_header soon. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the places where we need a pointer to the mac header, it is still legal to touch skb->mac.raw directly if just adding to, subtracting from or setting it to another layer header. This one also converts some more cases to skb_reset_mac_header() that my regex missed as it had no spaces before nor after '=', ugh. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
That is equal to skb->head before skb_reserve, to help in the layer header changes. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the cases where we want to set skb->mac.raw to an offset from skb->data. Simple cases first, the memmove ones and specially pktgen will be left for later. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
skb_push updates and returns skb->data, so we can just call skb_reset_mac_header after the call to skb_push. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
skb->head is equal to skb->data after alloc_skb, so reset the mac header while this is true, i.e. before skb_reserve. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by:
-
