TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TBS_6920
The card tested by me (Igor).
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Tested-by: Hámorszky Balázs <balihb@freepop.hu>
Signed-off-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The name of the pvrusb2 module is not likely to ever change, and there
are plenty of other places where the name is directly coded, so there
is little utility in using a macro to infer the module name here.  In
addition, using that macro complicates other uses of the driver
involving older kernels where this macro works differently.  Yes I
know for many places we don't have to worry about that.  But my
alternative is that I have to build special logic in the pvrusb2
standalone driver to special-case what is otherwise costmetic and that
is just plain nuts for something as trivial as this, especially since
this change does not at all have any compile time or run time impact
on the driver.  I'm just removing a nicety that didn't have a lot of
value here to begin with.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

It appears that various v4l-dvb drivers are changing to require
explicit initialization before use.  This change to the pvrusb2 driver
implements an automatic issuance of VIDIOC_INT_INIT when a module is
bound to the driver, thus conforming to the new behavior.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Clock (XCLK) Cleanup
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Add v4l2_i2c_tuner_addrs() to obtain the various I2C tuner addresses.
This will be used in several drivers, so make this a common function
as we do not want to have these I2C addresses all over the place.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Register v4l2_device and switch to v4l2_subdev to access the i2c modules.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch adds support for Philips webcam snapshot button as an
event input device, for consistency with other webcam drivers.
Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Previous v4l-dvb changeset id 4cc8ed11e2e0 changed the pvrusb2-hdw
internal API regarding i2c chip debug register access.  However that
change failed to also update the corresponding function comment
describing the API.  As driver maintained I never saw a request for an
ack on that change; there probably should have been one especially
since the manner in which this API operates was changed - its
interface is now entangled with a v4l specific struct and I would have
preferred to keep this API clear of moving-target v4l-isms such as
this one if at all possible which is why I had done it the way I did
before.  But whatever.  This commit at least fixes the comment issue.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Use the new pvrusb2 internal API to grab the device identifier, rather
than generating it directly.  This unifies some code and make possible
use of that identifier in places other than sysfs.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Implement a new internal function to create a string device
identifier.  This ID stays with the specific device, making it useful
to user space to identify specific devices.  We use the serial number
if available; otherwise we give up and just spit out a unit/instance ID.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The saa6752hs module needs this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch adds the capability of selecting between 4 different inputs
on vivi driver. Input 0 is the normal color bar, while inputs 1-3 are
modified color bars.

This allows testing input selection on userspace applications and
serves as an implementation model for other drivers.

The current approach allows a maximum of 10 different inputs, since the
input name generator assumes that we need just one digit to present the
input. It shouldn't be hard to modify it to present a bigger name of
inputs, but, in fact, it doesn't make much sense of doing it for this
test driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Merge branch 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip

* 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  bzip2/lzma: don't ask for compression mode for the default initramfs
  bzip2/lzma: consistently capitalize LZMA in Kconfig
  bzip2/lzma: clarify the meaning of the CONFIG_RD_ options
  bzip2/lzma: move CONFIG_RD_* options under CONFIG_EMBEDDED

<linux/irq.h> relies on <linux/gfp.h> and <linux/topology.h> having been
included previous.  If not, the errors like below will result.

    CC      arch/mips/mti-malta/malta-int.o
  In file included from arch/mips/mti-malta/malta-int.c:25:
  include/linux/irq.h: In function ‘init_alloc_desc_masks’:
  include/linux/irq.h:444: error: implicit declaration of function ‘cpu_to_node’
  include/linux/irq.h:446: error: ‘GFP_ATOMIC’ undeclared (first use in this function)
  include/linux/irq.h:446: error: (Each undeclared identifier is reported only once
  include/linux/irq.h:446: error: for each function it appears in.)
  make[3]: *** [arch/mips/mti-malta/malta-int.o] Error 1
  make[2]: *** [arch/mips/mti-malta] Error 2
  make[1]: *** [sub-make] Error 2

Fixed by including the two missing headers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc errors in sched.c:  the structs don't have
kernel-doc notation and the short function description needs to
be one line only.

  Error(kernel/sched.c:3197): cannot understand prototype: 'struct sd_lb_stats '
  Error(kernel/sched.c:3228): cannot understand prototype: 'struct sg_lb_stats '
  Error(kernel/sched.c:3375): duplicate section name 'Description'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc error in maple (it's not kernel-doc):

  Error(drivers/sh/maple/maple.c:782): cannot understand prototype: 'struct bus_type maple_bus_type = '
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: remove the pointer math from double_unlock_hb, fix
  futex: remove the pointer math from double_unlock_hb
  futex: clean up fault logic
  futex: unlock before returning -EFAULT
  futex: use current->time_slack_ns for rt tasks too
  futex: add double_unlock_hb()
  futex: additional (get|put)_futex_key() fixes
  futex: update futex commentary

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  smack: Add a new '-CIPSO' option to the network address label configuration
  netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections
  lsm: Remove the socket_post_accept() hook
  selinux: Remove the "compat_net" compatibility code
  netlabel: Label incoming TCP connections correctly in SELinux
  lsm: Relocate the IPv4 security_inet_conn_request() hooks
  TOMOYO: Fix a typo.
  smack: convert smack to standard linux lists

Annotate struct fs_struct's usage count to indicate the restrictions upon it.
It may not be incremented, except by clone(CLONE_FS), as this affects the
check in check_unsafe_exec() in fs/exec.c.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

check_unsafe_exec() also notes whether the fs_struct is being
shared by more threads than will get killed by the exec, and if so
sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid.
But /proc/<pid>/cwd and /proc/<pid>/root lookups make transient
use of get_fs_struct(), which also raises that sharing count.

This might occasionally cause a setuid program not to change euid,
in the same way as happened with files->count (check_unsafe_exec
also looks at sighand->count, but /proc doesn't raise that one).

We'd prefer exec not to unshare fs_struct: so fix this in procfs,
replacing get_fs_struct() by get_fs_path(), which does path_get
while still holding task_lock, instead of raising fs->count.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
___

 fs/proc/base.c |   50 +++++++++++++++--------------------------------
 1 file changed, 16 insertions(+), 34 deletions(-)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Joe Malicki reports that setuid sometimes doesn't: very rarely,
a setuid root program does not get root euid; and, by the way,
they have a health check running lsof every few minutes.

Right, check_unsafe_exec() notes whether the files_struct is being
shared by more threads than will get killed by the exec, and if so
sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid.
But /proc/<pid>/fd and /proc/<pid>/fdinfo lookups make transient
use of get_files_struct(), which also raises that sharing count.

There's a rather simple fix for this: exec's check on files->count
has been redundant ever since 2.6.1 made it unshare_files() (except
while compat_do_execve() omitted to do so) - just remove that check.

[Note to -stable: this patch will not apply before 2.6.29: earlier
releases should just remove the files->count line from unsafe_exec().]
Reported-by: Joe Malicki <jmalicki@metacarta.com>
Narrowed-down-by: Michael Itz <mitz@metacarta.com>
Tested-by: Joe Malicki <jmalicki@metacarta.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2.6.26's commit fd8328be
"sanitize handling of shared descriptor tables in failing execve()"
moved the unshare_files() from flush_old_exec() and several binfmts
to the head of do_execve(); but forgot to make the same change to
compat_do_execve(), leaving a CLONE_FILES files_struct shared across
exec from a 32-bit process on a 64-bit kernel.

It's arguable whether the files_struct really ought to be unshared
across exec; but 2.6.1 made that so to stop the loading binary's fd
leaking into other threads, and a 32-bit process on a 64-bit kernel
ought to behave in the same way as 32 on 32 and 64 on 64.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Impact: Kconfig noise reduction, documentation

The default initramfs is so small that it makes no sense to worry
about the additional memory taken by not double-compressing it.
Therefore, don't bug the user with it.

Also, improve the description of the option, which was downright
incorrect.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Impact: message formatting

Consistently spell LZMA in all capitals, since it (unlike gzip or
bzip2) is an acronym.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Impact: Kconfig clarification

Make it clear that the CONFIG_RD_* options are about what formats are
supported, not about what formats are actually being used.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Impact: reduce Kconfig noise

Move the options that control possible initramfs/initrd compressions
underneath CONFIG_EMBEDDED.  The only impact of leaving these options
set to y is additional code in the init section of the kernel; there
is no reason to burden non-embedded users with these options.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-core: Some style cleanups
  i2c-piix4: Add support for the Broadcom HT1100 chipset
  i2c-piix4: Add support to SB800 SMBus changes
  i2c-pca-platform: Use defaults if no platform_data given
  i2c-algo-pca: Use timeout for checking the state machine
  i2c-algo-pca: Rework waiting for a free bus
  i2c-algo-pca: Add PCA9665 support
  i2c: Adapt debug macros for KERN_* constants
  i2c-davinci: Fix timeout handling
  i2c: Adapter timeout is in jiffies
  i2c: Set a default timeout value for all adapters
  i2c: Add missing KERN_* constants to printks
  i2c-algo-pcf: Handle timeout correctly
  i2c-algo-pcf: Style cleanups
  eeprom/at24: Remove EXPERIMENTAL
  i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79
  i2c: Clarify which clients are auto-removed
  i2c: Let checkpatch shout on users of the legacy model
  i2c: Document the different ways to instantiate i2c devices

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30:
  fastboot: remove duplicate unpack_to_rootfs()
  ide/net: flip the order of SATA and network init
  async: remove the temporary (2.6.29) "async is off by default" code

Fix up conflicts in init/initramfs.c manually

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: be less noisy when gets a gpio conflict after kernel has booted
  Blackfin arch: add RSI's definitions to bf514 and bf516
  Blackfin arch: add link-time asserts to make sure on-chip regions dont overflow
  Blackfin arch: sport spi needs 6 gpio pins
  Blackfin arch: add sport-spi related resource stuff to board file
  Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as well
  Blackfin arch: Privide BF537-STAMP platform data of ADP5520 Multifunction driver
  Blackfin arch: enable the platfrom PATA driver with CF Cards
  Blackfin arch: clean up sports header file
  Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x
  Blackfin arch: bf51x processors also have 8 timers
  Blackfin arch: add a check to make sure only Blackfin GPIOs may generate IRQs
  Blackfin arch: update default kernel configuration
  Blackfin arch: include linux headers that this one uses definitions from fro sport drivers

Merge branch 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits)
  percpu: fix spurious alignment WARN in legacy SMP percpu allocator
  percpu: generalize embedding first chunk setup helper
  percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()
  percpu: make x86 addr <-> pcpu ptr conversion macros generic
  linker script: define __per_cpu_load on all SMP capable archs
  x86: UV: remove uv_flush_tlb_others() WARN_ON
  percpu: finer grained locking to break deadlock and allow atomic free
  percpu: move fully free chunk reclamation into a work
  percpu: move chunk area map extension out of area allocation
  percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free()
  x86, percpu: setup reserved percpu area for x86_64
  percpu, module: implement reserved allocation and use it for module percpu variables
  percpu: add an indirection ptr for chunk page map access
  x86: make embedding percpu allocator return excessive free space
  percpu: use negative for auto for pcpu_setup_first_chunk() arguments
  percpu: improve first chunk initial area map handling
  percpu: cosmetic renames in pcpu_setup_first_chunk()
  percpu: clean up percpu constants
  x86: un-__init fill_pud/pmd/pte
  x86: remove vestigial fix_ioremap prototypes
  ...

Manually merge conflicts in arch/ia64/kernel/irq_ia64.c

Some lines over 80. 
The printk(KERN_ERR ... ) should be dev_err.
And some blankspace should be deleted.
Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Signed-off-by: Jean Delvare <khlai@linux-fr.org>

Add support for the Broadcom HT1100 LD chipset (SMBus function.)
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>