Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fix compile for h3 MMC
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch removes old platform devices. Alsa should now
be using the ASoC driver. For boards not yet using ASoC,
please see sound/soc/omap/osk5912.c.

Add dummy aic23_power_up and aic23_power_down functions for 770
to keep things compiling.

Remove references to omap_gpio_switch, and unused h2_nand_dev_ready
function.

This patch is based on an earlier patch by Arun KS.

Cc: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch enables writing to McBSP Transmit Configuration Control
Register (XCCR) and Receive Configuration Control Register (RCCR)
for 2430/34xx platforms. It also adds XCCR, RCCR entries in McBSP
register configuration structure and bit definitions for both
registers.

If we enable the writing to CCR registers for 2430/34xx and don't
set the default values (setting 0 as a consequence) in ASoC driver,
the Transmit/Receive DMA mode gets disabled and the the
transmission/reception doesn't happen, ending with a
"write error: Input/Output error" when playing with 'aplay'.

Also define dummy CCR registers for omap1.

Cc: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adding I2C board info is required for tlvaic23 i2c chip driver.

Cc: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Removed duplicated #include's in arch/arm/mach-omap1/board-voiceblue.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Bug in existing code causes synchro control to be set +32 if request
line greater than 63 is used.

Also clean up the function a bit by removing extra parens and
clearing the bits at before write.

Reported by Wenbiao Wang.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

There are no wakeup registers on 15xx, and suspend_wakeup
does not exist in the struct gpio_bank.

Without this fix we'll get "arch/arm/plat-omap/gpio.c:1792:
error: 'struct gpio_bank' has no member named 'suspend_wakeup'"
as noted by Russell King.

Note that the ifdefs will be cleaned up once the omap gpio
code gets split into omap1 and omap2 specific parts.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Move twl4030 gpio init code to where it should be.
Also include twl4030.h.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix compile by removing remaining omap specific gpio
calls. Based on earlier patches by Jarkko Nikula.

Also remove old GPIO key code, there is already a patch
to do this with gpio_keys.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove old MMC platform init code accidentally
left behind.

Patches are welcome to the new style MMC init code.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Include irqs.h or cpu.h directly as needed to fix
omap builds.
Signed-off-by: Tony Lindgren <tony@atomide.com>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
  powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
  powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
  powerpc/e500mc: Doorbells need to be taken w/exceptions disabled
  powerpc: Enable PS3 options and QPACE in ppc64_defconfig
  powerpc/powermac: Fix occasional SMP boot failure
  powerpc/cacheinfo: Rename cache_dir per-cpu variable
  hvc_console: Use kzalloc() instead of kmalloc() + memset()
  hvc_console: Do not set low_latency when using interrupts
  hvc_console: Call free_irq() only if request_irq() was successful
  hvc_console: Change an mb() to smp_mb() and add some comments
  powerpc: Cleanup from l64 to ll64 change: drivers/net
  powerpc: Cleanup from l64 to ll64 change: drivers/char
  powerpc: Cleanup from l64 to ll64 change: arch code
  powerpc: Change u64/s64 to a long long integer type
  powerpc/kexec: Check crash_base for relocatable kernel
  powerpc: Make dummy section a valid note header
  Xilinx: SPI: updated driver for device tree
  drivers/of: Add the of_find_i2c_device_by_node function.
  powerpc/xsysace: add compatible string for non-ipcore instance
  powerpc/mpc52xx: remove dead code from GPIO driver
  ...

* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [CVE-2009-0029] s390 specific system call wrappers
  [CVE-2009-0029] System call wrappers part 33
  [CVE-2009-0029] System call wrappers part 32
  [CVE-2009-0029] System call wrappers part 31
  [CVE-2009-0029] System call wrappers part 30
  [CVE-2009-0029] System call wrappers part 29
  [CVE-2009-0029] System call wrappers part 28
  [CVE-2009-0029] System call wrappers part 27
  [CVE-2009-0029] System call wrappers part 26
  [CVE-2009-0029] System call wrappers part 25
  [CVE-2009-0029] System call wrappers part 24
  [CVE-2009-0029] System call wrappers part 23
  [CVE-2009-0029] System call wrappers part 22
  [CVE-2009-0029] System call wrappers part 21
  [CVE-2009-0029] System call wrappers part 20
  [CVE-2009-0029] System call wrappers part 19
  [CVE-2009-0029] System call wrappers part 18
  [CVE-2009-0029] System call wrappers part 17
  [CVE-2009-0029] System call wrappers part 16
  [CVE-2009-0029] System call wrappers part 15
  ...

Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adjust the arch overrides to the new names as well.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  [XFS] Update maintainers
  [XFS] use scalable vmap API
  [XFS] remove old vmap cache
  [XFS] make xfs_ino_t an unsigned long long
  [XFS] truncate readdir offsets to signed 32 bit values
  [XFS] fix compile of xfs_btree_readahead_lblock on m68k
  [XFS] Remove macro-to-function indirections in the mask code
  [XFS] Remove macro-to-function indirections in attr code
  [XFS] Remove several unused typedefs.
  [XFS] pass XFS_IGET_BULKSTAT to xfs_iget for handle operations

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  IDE: fix sparse signed-ness errors with host->host_busy
  ide: fix suspend regression
  tx4938ide: Fix build error due to read_sff_dma_status moving
  ide: remove unused CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
  sl82c105: remove dead code
  via82cxxx: fix cable warning message
  ide: can't use SSD/non-rotational queue flag for all CFA devices
  it821x.c: use dev->revision instead of pci_read_config_byte
  it821x: Add ultra_mask quirk for Vortex86SX
  ide: fix accidental LOCKDEP breakage caused by local_irq_set() removal

The host_busy field in struct ide_host defaults to a
signed-long, where most arch's test_and_set_bit_*
macros use an unsigned long.

Change to using an unsigned long, which on ARM removes
the following sparse errors:

drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8:    expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8:    got long volatile *<noident>
drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8:    expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Monday 12 January 2009, Simon Holm Thøgersen wrote:
> commit 295f0004 ("ide: don't execute the next queued command from the
> hard-IRQ context (v2)") breaks suspend to disk for me. On
> 'echo disk > /sys/power/state' the systems hangs, letting me switch
> virtual consoles, but not responding to Alt+SysRq

Restart the request queue early for REQ_TYPE_PM_RESUME requests
(though there is only one resume request for the whole resume
sequence it stays in the queue until is fully completed and now
depends on kblockd for processing consequential resume states).
Reported-and-bisected-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

CONFIG_LOPEC and CONFIG_SANDPOINT config options are gone.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove reference to the removed old-style kernel parameter.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Some rotating disks also present themselves as CFA devices.
Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Minor cleanup.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Shawn Lin <shawn@dmp.com.tw>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Vortex86SX with IDE controller revision 0x11 ultra DMA must be
disabled. This patch was tested by DMP and seems to work.

It is a cleaned up version of their older Kernel patch: 
 http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gzTested-by: Shawn Lin <shawn@dmp.com.tw>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

commit 54cc1428 ("ide: remove
local_irq_set() macro") accidentally replaced local_save_flags()
by local_irq_set() in ide_probe_port() and __ide_wait_stat()
which resulted in LOCKDEP breakage.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix the sparc build - we were including `up.o' on SMP builds, when
CONFIG_USE_GENERIC_SMP_HELPERS=n.
Tested-by: Robert Reif <reif@earthlink.net>
Fixed-by: Robert Reif <reif@earthlink.net>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This assertion is incorrect for lockless pagecache.  By definition if we
have an unpinned page that we are trying to take a speculative reference
to, it may become the tail of a compound page at any time (if it is
freed, then reallocated as a compound page).

It was still a valid assertion for the vmscan.c LRU isolation case, but
it doesn't seem incredibly helpful...  if somebody wants it, they can
put it back directly where it applies in the vmscan code.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>