- 12 Nov, 2005 14 commits
-
-
Richard Purdie authored
Patch from Richard Purdie Add the core machine support for the Sharp SL-C1000 (Akita) and enable the Kconfig selection for it. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
We don't want to reset the DMA state machine while the other channel is in use. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Restore smp.c back to how it used to be. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
We must _never_ _ever_ on pain of death enable IDE DMA on SL82C105 chipsets where the southbridge revision is <= 5, otherwise data corruption will occur. Strangely this used to work, but something has changed in the upper echelons of the IDE layer to break the hosts decision to deny DMA. Let's make it crystal clear to the IDE layer that we know best. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Unfortunately, all these machines got broken when the PFN memory setup changes happened. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Torvalds authored
As per the new release rules: two weeks of merging, and then an -rc1 and calming down for the next release.
-
Linus Torvalds authored
-
Linus Torvalds authored
-
-
-
Neil Horman authored
Also introduces a sysctl option to configure the receive buffer accounting policy to be either at socket or association level. Default is all the associations on the same socket share the receive buffer. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Yasevich authored
On ia64, it is possible to get NaT Consumption Fault and a kernel panic when initializing sctp sideeffect commands arguments. The union sctp_arg_t contains different sized elements and when loading a smaller sized element (32 or 16 bits), it is possible for a speculative load to fail and result in a NaT bit set which causes a kernel crash. The easy way to get around it is to load the largerst member of the union. Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Yasevich authored
The socket level timeout values are maintained in sctp_sock and association level timeouts are in sctp_association. So there is no need for ep->timeouts. Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Yasevich authored
It is possible to get to sctp_v4_get_saddr() without a valid association. This happens when processing OOTB packets and the cached route entry is no longer valid. However, when responding to OOTB packets we already properly set the source address based on the information in the OOTB packet. So, if we we get to sctp_v4_get_saddr() without an association we can simply return. Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Nov, 2005 26 commits
-
-
David S. Miller authored
Based mostly upon a patch from Olaf Kirch <okir@suse.de> When initialization fails in inet6_init(), we should unregister the PF_INET6 socket ops. Also, check sock_register()'s return value for errors. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike Christie authored
scsi_wait_req does not exist any more in the SCSI layer. This patch makes it so libata can compile again. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
After the last merge of the new unified 'powerpc' architecture, ppc64 no longer compiles cleanly as a standalone architecture. Some bits and pieces still exist as files under the old ppc64 hierarchy, but the old "ARCH=ppc64" is dead. So if "uname" says ppc64, that now implies that the default architecture should be "powerpc". Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Update the ixp2000 defconfigs to 2.6.14-git13. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
David S. Miller authored
Noticed by Tom 'spot' Callaway. Even on uniprocessor we always reported the number of physical cpus in the system via /proc/cpuinfo. But when this got changed to use num_possible_cpus() it always reads as "1" on uniprocessor. This change was unintentional. So scan the firmware device tree and count the number of cpu nodes, and report that, as we always did. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Caulfield authored
Currently recvmsg generates SIGPIPE whereas sendmsg does not; for the other stacks it seems to be the other way round! It also fixes the bug where reading from a socket whose peer has shutdown returned -EINVAL rather than 0. Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Maule authored
Fix default VGA console on SN platforms. Since SN firmware does not pass enough ACPI information to identify VGA cards and the associated legacy IO/MEM addresses, we rely on the EFI PCDP table. Since the linux pcdp driver is optional (and overridden if console= directives are used) SN duplicates a portion of the pcdp scan code to identify if there is a usable console VGA adapter. Additionally, dup necessary pcdp related structs to avoid dragging drivers/pcdp.h into a more public location. Signed-off-by: Mark Maule <maule@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Robin Holt authored
This patch introduces 4-level page tables to ia64. I have run some benchmarks and found nothing interesting. Performance has consistently fallen within the noise range. It also introduces a config option (setting the default to 3 levels). The config option prevents having 4 level page tables with 64k base page size. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Hironobu Ishii authored
Part of a patch was accidentally reverted, this corrects an inconsistent spinlock use in the IPMI message handler. Signed-off-by: Hironobu Ishii <hishii@soft.fujitsu.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Jeff Garzik authored
Recent TCP changes broke the build. Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ralf Baechle authored
As part of the ISO C9x conversion gcc deprecates concatenation with __FUNCTION__ because __FUNCTION__ is not a preprocessor macro. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Pete Popov authored
The following patch support the SMC9111 present on DB1200 boards. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ralf Baechle authored
o Try to work around some of the undocumented "features" of the SAA9730 o Use netdev_priv() instead of the previous broken mechanism to allocate the private data structure. o Try to make sure we don't leak resources on exit. o No more need to call SET_MODULE_OWNER in 2.6. o Use pci_free_consistent instead of homegrown architecture-specific allocation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 531 +++++++++++++++++++++++--------------------------- 1 files changed, 249 insertions(+), 282 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ralf Baechle authored
Kill trailing whitespace, replace leading whitespace with tabs. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 98 +++++++++++++++++++++++++------------------------- 1 files changed, 49 insertions(+), 49 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-