- 09 Apr, 2010 22 commits
-
-
Dave Airlie authored
* 'nouveau/for-airlied' of ../drm-nouveau-next: (21 commits) drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers drm/nv50: implement gpio set/get routines drm/nv50: parse/use some more de-magiced parts of gpio table entries drm/nouveau: store raw gpio table entry in bios gpio structs drm/nv40: Init some tiling-related PGRAPH state. drm/nv50: Add NVA3 support in ctxprog/ctxvals generator. drm/nv50: another dodgy DP hack drm/nv50: punt hotplug irq handling out to workqueue drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders drm/nv50: Allow using the NVA3 new compute class. drm/nv50: cleanup properly if PDISPLAY init fails drm/nouveau: fixup the init failure paths some more drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark drm/nv40: add LVDS table quirk for Dell Latitude D620 drm/nv40: rework lvds table parsing drm/nouveau: detect vram amount once, and save the value drm/nouveau: remove some unused members from drm_nouveau_private drm/nouveau: Make use of TTM busy_placements. drm/nv50: add more 0x100c80 flushy magic drm/nv50: fix fbcon when framebuffer above 4GiB mark ...
-
Ben Skeggs authored
There's one known case where we never stop recieving DEFER, and loop here forever. Lets not do that.. Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
And use our own version of the GPIO table for the INIT_GPIO opcode. Signed-off-by: -
Francisco Jerez authored
Fixes garbled 3D on an nv46 card. Reported-by:
Francesco Marella <francesco.marella@gmail.com> Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Signed-off-by:
-
Marcin Kościelnicki authored
Signed-off-by:
Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by:
-
Ben Skeggs authored
Allows *some* DP cards to keep working in some corner cases that most people shouldn't hit. I hit it all the time with development, so this can stay for now. Signed-off-by: -
Ben Skeggs authored
On DP outputs we'll likely end up running vbios init tables here, which may sleep. Signed-off-by: -
Ben Skeggs authored
This value interacts with some registers we don't currently know how to program properly ourselves. The default of 5 that we were using matches what the VBIOS on early DP cards do, but later ones use 6, which would cause nouveau to program an incorrect mode on these chips. Signed-off-by: -
Marcin Kościelnicki authored
Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Should fix: https://bugzilla.redhat.com/show_bug.cgi?id=505132 https://bugzilla.redhat.com/show_bug.cgi?id=543091 https://bugzilla.redhat.com/show_bug.cgi?id=530425 https://bugs.edge.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/ +bug/539730 Signed-off-by:
-
Ben Skeggs authored
All indications seem to be that the version 0x30 table should be handled the same way as 0x40 (as used on G80), at least for the parts that we currently try use. This commit cleans up the parsing to make it clearer about what we're actually trying to achieve, and unifies the 0x30/0x40 parsing. Signed-off-by: -
Ben Skeggs authored
As opposed to repeatedly reading the amount back from the GPU every time we need to know the VRAM size. We should now fail to load gracefully on detecting no VRAM, rather than something potentially messy happening. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Francisco Jerez authored
Previously we were filling it the same as "placements", but in some cases there're valid alternatives that we were ignoring completely. Keeping a back-up memory type helps on several low-mem situations. Signed-off-by:
-
Ben Skeggs authored
Fixes the !vbo_fifo path in the 3D driver on certain chipsets. Still not really any good idea of what exactly the magic achieves, but it makes things work. While we're at it, in the PCIEGART path, flush on unbinding also. Signed-off-by: -
Ben Skeggs authored
This can't actually happen right now, but lets fix it anyway. Signed-off-by: -
Marcin Kościelnicki authored
Signed-off-by:
-
- 07 Apr, 2010 5 commits
-
-
Alex Deucher authored
Some vbios dac_adj tables are all zeros. Check for that case and use the default table if so. Should fix fdo bug 27478. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
- make sure legacy dac1 has an enc priv - remove unused num var - no need for extra tv_dac var in atom dac functions Signed-off-by:
-
Alex Deucher authored
- fix formatting - clean up tv_dac_cntl handling for tv Signed-off-by:
-
Dan Carpenter authored
This is an unlikely memory leak, but we may as well fix it. It's easy to fix and every static checker will complain if we don't. Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Adam Jackson authored
Claims 1280x1024 preferred, physically 1600x1200 cf. http://bugzilla.redhat.com/530399Signed-off-by:
Adam Jackson <ajax@redhat.com> Cc: stable@kernel.org Signed-off-by:
-
- 06 Apr, 2010 1 commit
-
-
Alex Deucher authored
bad cast was overwriting the tvdac adj values Fixes fdo bug 27478 Signed-off-by:
-
- 05 Apr, 2010 2 commits
-
-
Alex Deucher authored
The GPIO_I2C_INFO table does not always have ATOM_MAX_SUPPORTED_DEVICE entries. Limit the number of indices to the size of the table. Should fix Novell bug 589022. v2: fix typo Signed-off-by:
-
Michel Dänzer authored
Gleaned from the Mesa code. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27355 . Signed-off-by:
Michel Dänzer <daenzer@vmware.com> Cc: stable@kernel.org Signed-off-by:
-
- 01 Apr, 2010 4 commits
-
-
Dave Airlie authored
Some GPUs have an APM/ACPI PM mode selection switch and some BIOSes set this to APM. We really want this in ACPI mode for Linux. Signed-off-by: -
Dave Airlie authored
These GPUs should be setting these registers up also. Signed-off-by: -
Dave Airlie authored
If we resume in a bad way, we'll get 0xffffffff in wptr, and then oops with no console. This just adds a sanity check so that we can avoid the oops and hopefully get more details out of people's systems. Signed-off-by: -
Alex Deucher authored
Need to enable the VID stream after link training Signed-off-by:
-
- 31 Mar, 2010 6 commits
-
-
Alex Deucher authored
Turn off hw i2c by default except for mm i2c which is hw only until we sort out the remaining prescale issues on older chips. hw i2c can be enabled with hw_i2c=1. Signed-off-by:
-
Alex Deucher authored
This allows us to remove the internal bit algo bus used by the radeon i2c algo. We now register a radeon algo adapter if the gpio line is hw capable and the hw inplementation is available, otherwise we register a bit algo adapter. Signed-off-by:
-
Dave Airlie authored
-
Alex Deucher authored
Doesn't seem to work reliably and the pci quirks don't always work. Signed-off-by:
-
Alex Deucher authored
- Add module option to force the display priority 0 = auto, 1 = normal, 2 = high - Default to high on r3xx/r4xx/rv515 chips Fixes flickering problems during heavy acceleration due to underflow to the display controllers - Fill in minimal support for RS600 v2 - update display priority when bandwidth is updated so the user can change the parameter at runtime and it will take affect on the next modeset. Signed-off-by:
-
Alex Deucher authored
Seems to have gotten lost in the evergreen merge. Signed-off-by:
-
