This patch (as1052) enables USB-PERSIST for all devices by default.
The user won't have to remember to enable it explicitly for devices
containing mounted filesystems.

Eventually userspace tools like hal may be able to set the persist
attribute automatically when a filesystem is mounted on a USB device.
When that time comes this patch can be reverted, if people think it
matters.

This approach has the advantage of giving the user the ability to turn
off USB-PERSIST for devices with mounted filesystems, rather than
making the kernel always assume it should be on.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1048) extends the descriptor checking after a device is
reset.  Now the SerialNumber string descriptor is compared to its old
value, in addition to the device and configuration descriptors.

As a consequence, the kmalloc() call in usb_string() is now on the
error-handling pathway for usb-storage.  Hence its allocation type is
changed to GFO_NOIO.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1047) removes the USB_PERSIST Kconfig option, enabling
it permanently.  It also prevents the power/persist attribute from
being created for hub devices; there's no point in having it since
USB-PERSIST is always turned on for hubs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1046) makes USB-PERSIST work more in accordance with
the documentation.  Currently it takes effect only in cases where the
root hub has lost power or been reset, but it is supposed to operate
whenever a power session was dropped during a system sleep.

A new hub_restart() routine carries out the duties required during a
reset or a reset-resume.  It checks to see whether occupied ports are
still enabled, and if they aren't then it clears the enable-change and
connect-change features (to prevent interference by khubd) and sets
the child device's reset_resume flag.  It also checks ports that are
supposed to be unoccupied to verify that the firmware hasn't left the
port in an enabled state.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1045) reorganizes some code in the hub driver.
hub_port_status() is moved earlier in the file, and a new hub_stop()
routine is created to do the work currently in hub_preset() (i.e.,
disconnect all child devices and quiesce the hub).

There are no functional changes.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1044) causes EHCI port handover for non-high-speed
devices to occur during every root-hub resume, not just in cases where
the controller lost power or was reset.  This is necessary because:

	When some machines go into suspend, they remove power from
	on-board USB devices while retaining suspend current for USB
	controllers.

	The user might well unplug a USB device while the system is
	suspended and then plug it back in before resuming.

A corresponding change is made to the core resume routine; now
high-speed root hubs will always be resumed when the system wakes up,
even if they were suspended before the system went to sleep.  If this
weren't done then EHCI port handover wouldn't work, since it is called
when the EHCI root hub is resumed.

Finally, a comment is added to the hub driver explaining the khubd has
to be freezable; if it weren't frozen then it could interfere with
port handover.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add the HP hs2300 Broadband Wireless Module (relabeled MC8775) USB IDs
Signed-off-by: Stefan Seyfried <seife@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix the leak of the snap structure allocated in mon_stat_open().
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
  "make namespacecheck" fixes
  x86: fix compilation error in VisWS
  x86: voyager fix
  x86: Drop duplicate from setup.c
  intel-iommu.c: dma ops fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Stephen Rothwell noticed that:

Commit 2be62149 ("x86: dma-ops on highmem
fix") in Linus' tree introduced a new warning (noticed in the x86_64
allmodconfig build of linux-next):

drivers/pci/intel-iommu.c:2240: warning: initialization from incompatible pointer type

Which points at an instance of map_single that needs updating.

Fix it to the new prototype.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix typo in previous commit
  [CIFS] Fix define for new proxy cap to match documentation
  [CIFS] Fix UNC path prefix on QueryUnixPathInfo to have correct slash
  [CIFS] Reserve new proxy cap for WAFS
  [CIFS] Add various missing flags and defintions
  [CIFS] make cifs_dfs_automount_list_static
  [CIFS] Fix oops when slow oplock process races with unmount
  [CIFS] Fix acl length when very short ACL being modified by chmod
  [CIFS] Fix looping on reconnect to Samba when unexpected tree connect fail on reconnect
  [CIFS] minor update to change log

Fix a regression in the RXKAD security module introduced in:

	commit 91e916cf
	Author: Al Viro <viro@ftp.linux.org.uk>
	Date:   Sat Mar 29 03:08:38 2008 +0000

	net/rxrpc trivial annotations

A variable was declared as a 16-bit type rather than a 32-bit type.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-with-apologies-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>

This snuck in through 919ee677
("[SPARC64]: Add NUMA support")
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (80 commits)
  SUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request
  make nfs_automount_list static
  NFS: remove duplicate flags assignment from nfs_validate_mount_data
  NFS - fix potential NULL pointer dereference v2
  SUNRPC: Don't change the RPCSEC_GSS context on a credential that is in use
  SUNRPC: Fix a race in gss_refresh_upcall()
  SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requests
  SUNRPC: Remove the unused export of xprt_force_disconnect
  SUNRPC: remove XS_SENDMSG_RETRY
  SUNRPC: Protect creds against early garbage collection
  NFSv4: Attempt to use machine credentials in SETCLIENTID calls
  NFSv4: Reintroduce machine creds
  NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()
  nfs: fix printout of multiword bitfields
  nfs: return negative error value from nfs{,4}_stat_to_errno
  NLM/lockd: Ensure client locking calls use correct credentials
  NFS: Remove the buggy lock-if-signalled case from do_setlk()
  NLM/lockd: Fix a race when cancelling a blocking lock
  NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call
  NLM: Remove the signal masking in nlmclnt_proc/nlmclnt_cancel
  ...

* 'for-linus' of git://linux-nfs.org/~bfields/linux: (52 commits)
  knfsd: clear both setuid and setgid whenever a chown is done
  knfsd: get rid of imode variable in nfsd_setattr
  SUNRPC: Use unsigned loop and array index in svc_init_buffer()
  SUNRPC: Use unsigned index when looping over arrays
  SUNRPC: Update RPC server's TCP record marker decoder
  SUNRPC: RPC server still uses 2.4 method for disabling TCP Nagle
  NLM: don't let lockd exit on unexpected svc_recv errors (try #2)
  NFS: don't let nfs_callback_svc exit on unexpected svc_recv errors (try #2)
  Use a zero sized array for raw field in struct fid
  nfsd: use static memory for callback program and stats
  SUNRPC: remove svc_create_thread()
  nfsd: fix comment
  lockd: Fix stale nlmsvc_unlink_block comment
  NFSD: Strip __KERNEL__ testing from unexported header files.
  sunrpc: make token header values less confusing
  gss_krb5: consistently use unsigned for seqnum
  NFSD: Remove NFSv4 dependency on NFSv3
  SUNRPC: Remove PROC_FS dependency
  NFSD: Use "depends on" for PROC_FS dependency
  nfsd: move most of fh_verify to separate function
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits)
  V4L/DVB (7731): tuner-xc2028: fix signal strength calculus
  V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares
  V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv
  V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken
  V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800
  V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support
  V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface
  V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2
  V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point
  V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure
  V4L/DVB (7719): pvrusb2: Implement input selection enforcement
  V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections
  V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx
  V4L/DVB (7716): pvrusb2: clean up global functions
  V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__
  V4L/DVB (7714): pvrusb2: Fix hang on module removal
  V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown
  V4L/DVB (7712): pvrusb2: Close connect/disconnect race
  V4L/DVB (7711): pvrusb2: Fix race on module unload
  V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices
  ...

RFC 2203 requires the server to drop the request if it believes the
RPCSEC_GSS context is out of sequence. The problem is that we have no way
on the client to know why the server dropped the request. In order to avoid
spinning forever trying to resend the request, the safe approach is
therefore to always invalidate the RPCSEC_GSS context on every major
timeout.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

There are different tables for MTS firmwares. This should be taken into
account while selecting the proper firmware.

While at tuner-xc2028.h, improve some comments.

Thanks to Edward J. Sheldrake <ejs1920@yahoo.co.uk> for helping to
diagnose such troubles with PAL/I standard.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Frank Bennett reported that ivtv was causing skype to crash. With help
from one of their developers he showed it was a kernel problem.
VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names
that are too long and does not truncate them so corrupts a few bytes of
the app data area.

Possibly the names also want trimming but for now this should fix the
corruption case.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

cx23885: Enable cx23417 support on the HVR1800
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

cx23885: Add generic cx23417 hardware encoder support.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Change how list of possible pvrusb2 inputs is generated to include
only those interfaces that make sense for the interface instance.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

These changes are required with the addition of digital television support
for the Hauppauge HVR1900 & HVR1950, the OnAir Creator and Sasem USB HDTV
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This patch contains the following cleanups:
- make the following needlessly global function static:
  - pvr2_hdw_set_cur_freq()
- #if 0 the following unused global functions:
  - pvr2_hdw_get_state_name()
  - pvr2_hdw_get_debug_info_unlocked()
  - pvr2_hdw_get_debug_info_locked()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Apparently the kernel developers no longer consider it proper
etiquette to use __FUNCTION__; everyone must instead use __func__
(even though it breaks with older compilers).  And worse still, actual
effort is being expended to sweep this change throughout the kernel
source tree.  Don't these people have better things to do?  So...
Completely clean out all use of __FUNCTION__ from the pvrusb2 driver
(it was just in the sysfs interface).  I'm not going to use __func__
either.  So there.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The pvrusb2 driver was getting had by this scenario:

1. Task A calls kthread_stop() for task B.
2. Before exiting, then Task B calls kthread_stop() for task C.

The problem is, kthread_stop() wants to allocate an internal resource
to itself (i.e. acquire a lock), which won't be released until
kthread_stop() returns.  But kthread_stop() won't return until task B
is dead.  But task B won't die until it finishes its call to
kthread_stop() for task C, and that will block waiting on the resource
already allocated inside task A.  Deadlock.

With the pvrusb2 driver, task A is the caller to pvr_exit(), task B is
the control thread run inside of pvrusb2-context.c, and task C is any
worker thread run inside of pvrusb2-hdw.c.

This problem got introduced by the previous threading setup change,
which was itself an attempt to fix a module tear-down race (which it
actually did fix).  The lesson here is that a task being waited on as
part of a kthread_stop() simply cannot be allow to also issue a
kthread_stop() - or we make sure not to issue the enclosing
kthread_stop() until we know that the inner kthread_stop() has
completed first.  The solution for the pvrusb2 driver is some hackish
code which changes the main control thread tear down into a two step
process.  This then makes it possible to delay issuing the
kthread_stop() on the control thread until after we know that
everything has been torn down first.  (And yes, we really need that
kthread_stop() because it's the only way to safely guarantee that a
module-referencing kernel thread has safely returned back out of the
module before we finally remove the module.)
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Earlier fix to handle DVB feed thread aborts was overly-aggressive.
We can take better advantage of what kthread_stop() can do.  This
change simplifies things.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>