- 16 Oct, 2007 40 commits
-
-
Clemens Ladisch authored
Add a snd_pcm_rate_to_rate_bit() function to factor out common code used by several drivers. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Merge the rates[] arrays from pcm_misc.c and pcm_native.c because they are both the same. Signed-off-by:
-
Clemens Ladisch authored
Set the SNDRV_PCM_INFO_SYNC_START flag and the substream's sync ID (only) if the substream actually can be linked to another one. Signed-off-by:
-
Takashi Iwai authored
Check ioremap error and handle properly at initialization. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
Add power_save_controller module option instead of define flag. Also, added descriptions of new module options in ALSA-Configuration.txt. Signed-off-by:
-
Tobin Davis authored
Tested against a couple of different systems (with different pin configs), but the others should also work. Also cleaned up some of the 9205 patch code. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Takashi Iwai authored
The controller power wasn't turned on properly at resume due to the power-saving patch. Now fixed. Signed-off-by:
-
Mariusz Kozlowski authored
isn't needed there. Upatched code uses: memset(info, 0, sizeof(info)); where 'info' is a pointer and therefore only first 4 bytes of 'info' gets cleared on a 32bit machine. Anyway looking at the code zeoring this memory region isn't needed at all because the snd_emu10k1_fx8010_info() function initializes all the 'info' fields on its own. So that's why this code works at all in its original form. This patch removes this redundant code. Also snd_emu10k1_fx8010_info() can't fail so lets save some bytes and change its return type to void. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
Update the documentation to reflect the last changes regarding the power-saving mode and register caches. Signed-off-by:
-
Takashi Iwai authored
Added CONFIG_SND_HDA_POWER_SAVE kconfig. It's an experimental option to achieve an aggressive power-saving. With this option, the driver will turn on/off the power of each codec and controller chip dynamically on demand. The patch introduces a new module option 'power_save'. It specifies the second of time-out for automatic power-down. As default, it's 10 seconds. Setting 0 means to suppress the power-saving feature. The codec may have analog-input loopbacks, which are usually represented by mixer elements such as 'Mic Playback Switch' or 'CD Playback Switch'. When these are on, we cannot turn off the mixer and the codec chip has to be kept on. For bookkeeping these states, a new codec-callback is introduced. For the bus-controller side, a new callback pm_notify is introduced, which can be used to turn on/off the contoller appropriately. Note that this power-saving might cause slight click-noise at power-on/off. Also, it might take some time to wake up the codec, and might even drop some tones at the very beginning. This seems to be the side-effect of turning off the controller chip. This turn-off of the controller can be disabled by undefining HDA_POWER_SAVE_RESET_CONTOLLER in hda_intel.c. Signed-off-by:
-
Takashi Iwai authored
We have already a generic bind-control helper, so let's clean up the codes using it. Signed-off-by:
-
Takashi Iwai authored
Added snd_hda_codec_amp_stereo() function that changes both of stereo channels with the same mask and value bits. It simplifies most of amp-handling codes. Signed-off-by:
-
Takashi Iwai authored
So far, the driver looked the table of snd_kcontrol_new used for creating mixer elements and forces to call each of its put callbacks in PM resume code. This is too ugly and hackish. Now, the resume is simplified using the codec amp and command register caches. The driver simply restores the values that have been written in the cache table. With this simplification, most codec support codes don't require any special resume callback. Signed-off-by:
-
Takashi Iwai authored
This patch adds the cache for codec command registers. snd_hda_codec_write_cache() and snd_hda_sequence_write_cache() do the write operations with caching, which values can be resumed via snd_hda_codec_resume_cache(). The patch introduces only the framework, and no codec code is using this cache yet. It'll be implemented in the following patch. Signed-off-by:
-
Takashi Iwai authored
Rewrite the code to handle amp cache and hash tables to be more generic. This routine will be used by the register caches in the next patch. Signed-off-by:
-
Takashi Iwai authored
Replace the direct calculation of jiffies with msecs_to_jiffies(). Signed-off-by:
-
Takashi Iwai authored
Add the quirk to support Advanced mode of Edirol UA-1EX. Signed-off-by:
-
Krzysztof Helt authored
This patch uses the Kconfig parameters SND_AD1848_LIB and SND_CS4231_LIB instead of mentioning each driver that requires the ad1848-lib or cs4231-lib separately in the Makefiles. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Clemens Ladisch authored
Check for a valid event type when encoding a system real-time message to prevent the bytes F9 or FD resulting in an empty sequencer message. Signed-off-by:
-
Clemens Ladisch authored
Reorganize the encoder logic to prevent status bytes that appear where data bytes are expected from being interpreted as data bytes. Signed-off-by:
-
Clemens Ladisch authored
Reset the event type after encoding a system message to prevent any following data bytes from being interpreted as data for a running status system message, which is not allowed in MIDI. Signed-off-by:
-
Clemens Ladisch authored
Create a new state ST_INVALID for the encoder to prevent data bytes at the beginning of a stream or after a sysex message being interpreted as note-off parameters. Signed-off-by:
-
Mark Hills authored
(bugtrack #2932). The interface is two USB devices in the same physical box. Note that this is the USB ScratchAmp v1 and not the later v2 (firewire) model. Signed-off-by:
Mark Hills <mark@pogo.org.uk> Signed-off-by:
-
Takashi Iwai authored
The recent OSS includes the support for 32bit and other formats, which we already have, too. Let's define and map them. Signed-off-by:
-
Takashi Iwai authored
Now the OSS emulation supports 3bytes format, too. Signed-off-by:
-
Takashi Iwai authored
Add the support of 3-bytes 24bit formats in PCM OSS emulation. Also removed snd_pcm_build_linear_format() function. It's exported just for OSS emulation, and now the code was changed without calling this function. Signed-off-by:
-
Takashi Iwai authored
Simplify the format conversion code in PCM OSS emulation. This patch also adds the support of 3bytes 24bit formats with linear and mulaw, but they are not enabled in pcm_plugin.c yet. Signed-off-by:
-
Takashi Iwai authored
Fix Makefile to compile files conditionally to CONFIG_SND_PCM_OSS_PLUGINS, and remove unneeded ifdefs in these files. Signed-off-by:
-
Takashi Iwai authored
Remove the bogus IRQF_DISBLAED together with IRQF_SHARED from the example code in the document. Signed-off-by:
-
Eugene Teo authored
This patch fixes: 1) a resource leak (CID: 1817) 2) various code cleanups Signed-off-by:
Eugene Teo <eugeneteo@kernel.sg> Signed-off-by:
-
Tobin Davis authored
This patch adds support for some Acer Aspire systems. Signed-off-by:
-
Tobin Davis authored
This patch adds support for Dell E520 and a couple of other 965 based systems. Signed-off-by:
-
Russ Cox authored
Following the suggestion in this thread: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/26683 the correct upper bound on desc[0] is 5 + num_ins not 6 + num_ins, because the index used later is 5+i, not 6+i. This change makes my Vosky Chatterbox speakerphone work. Apparently it also helps with the Minivox MV100. Signed-off-by:
Russ Cox <rsc@swtch.com> Signed-off-by:
-
Jesper Juhl authored
In sound/pci/au88x0/au88x0.c::snd_vortex_create() : The Coverity checker found that if we allocate storage for 'chip' but then leave via the regions_out: label, then we end up leaking the storage allocated for 'chip'. I believe simply freeing 'chip' before the 'return err;' line is all we need to fix this, but please double-check me :) Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Some functions in hda_codec.c are called from patch ops, which are kept in the codec instance even after initialization. Thus they shouldn't be marked as __devinit. Signed-off-by:
-
Michal Piotrowski authored
File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 82 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 103 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 241 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 310 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 334 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 344 Unknown CONFIG option! CONFIG_H3600_HAL File /home/devel/linux-rdc/sound/arm/sa11xx-uda1341.c line 357 Unknown CONFIG option! CONFIG_H3600_HAL Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Michal Piotrowski authored
Coding style fix Signed-off-by:
-
Takashi Iwai authored
Fix a typo in Kconfig help text for CONFIG_SND_HDA_HWDEP. Signed-off-by:
-
Rene Herman authored
As reported by Troy Heidner, the 'Gateway Solo 5150' laptop (for one) has an onboard ESS1879 that identifies itself through PNPBIOS as just that. He also confirmed that other than not knowing about it, snd-es18xx drives the chip fine, so this adds the ID to the driver. Signed-off-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
-
Scott Thompson authored
ioremap / iounmap balancing in sound/soc tree Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Signed-off-by:
-
