- 20 Aug, 2009 40 commits
-
-
Michael Ellerman authored
Currently _edata does not include several data sections, this causes the kernel's report of memory usage at boot to not match reality, and also prevents kmemleak from working - because it scan between _sdata and _edata for pointers to allocated memory. This mirrors a similar change made recently to the x86 linker script. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Make it possible to enable GCOV code coverage measurement on powerpc. Lightly tested on 64-bit, seems to work as expected. Signed-off-by:
-
Roel Kluin authored
Check whether index is within bounds prior to calculating a possibly-invalid address. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Bernd Petrovitsch <bernd@firmix.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Christoph Hellwig authored
hardirq.h on powerpc defines a __last_jiffy_stamp field, but it's not actually used anywhere. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Michel Dänzer authored
Map the GART table uncached, so we don't always need to flush the CPU caches explicitly after updates. Signed-off-by:
Michel Dänzer <daenzer@vmware.com> Signed-off-by:
-
Michel Dänzer authored
Using the radeon KMS test functionality, I verified that the AGP bridge of the Intrepid2 chipset in my PowerBook supports aperture sizes up to 256M. So allow aperture sizes up to 256M on pre-U3 bridges as well, and bump the default size to 256M. It's possible that older revisions only support smaller sizes, but it'll be easy to verify that with the raden KMS test functionality. Also, there's only a problem on an actual attempt to access the aperture beyond the maximum size supported by the hardware, and non-KMS X still defaults to using only 32M. Also use ARRAY_SIZE for the aperture size arrays. Signed-off-by:
-
roel kluin authored
Check whether index is within bounds before grabbing the element. Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Geert Uytterhoeven authored
As <asm/iommu.h> doesn't contain any other hardware specific definitions but only interfaces. Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
roel kluin authored
Missing tests after ioremap() Signed-off-by:
-
Benjamin Krill authored
Evaluate mem kernel parameter for early memory allocations. If mem is set no allocation in the region above the given boundary is allowed. The current code doesn't take care about this and allocate memory above the given mem boundary. Signed-off-by:
Benjamin Krill <ben@codiert.org> Signed-off-by:
-
Stoyan Gaydarov authored
These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/Signed-off-by:
Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by:
-
Michael Ellerman authored
Very lightly tested, doesn't crash the kernel. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Julia Lawall authored
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by:
-
Martyn Welch authored
Add a byte length read and write interface compatible with the nvram_generic driver interface to the mmio driver. Signed-off-by:
Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by:
-
Christoph Hellwig authored
I wrote sputrace before generic tracing infrastrucure was available. Now that we have the generic event tracer we can convert it over and remove a lot of code: 8 files changed, 45 insertions(+), 285 deletions(-) To use it make sure CONFIG_EVENT_TRACING is enabled and then enable the spufs trace channel by echo 1 > /sys/kernel/debug/tracing/events/spufs/spufs_context/enable and then read the trace records using e.g. cat /sys/kernel/debug/tracing/trace Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Kumar Gala authored
Since the pte_lockptr is a spinlock it gets optimized away on uniprocessor builds so using spin_is_locked is not correct. We can use assert_spin_locked instead and get the proper behavior between UP and SMP builds. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Martyn Welch authored
Update GE Fanuc DTS to match the alterations suggested during the merge of the ppc9a DTS in commit 740d36aeSigned-off-by:
-
Martyn Welch authored
This patch enables the XMC (PCIe daughter card) site on the SBC310. STG enter the description for the patch above. Signed-off-by:
-
Martyn Welch authored
/proc/cpuinfo should be showing the boards revision and the revision of the FPGA fitted. The functions currently used to access this information as incorrect. Additionally the VME geographical address of the PPC9A and it's status as system contoller are available in the board registers. Show these in cpuinfo. Signed-off-by:
-
Anton Vorontsov authored
Actually, the support is already there, but it requires newer U-Boots (to fill-in clock-frequency, and setup pin multiplexing). Though, it appears that on RDB boards USBB pins aren't multiplexed between USB and eSDHC (unlike MDS boards, where USB and eSDHC share pctl and pwrfault pins). So, for RDB boards we can safely setup pinmux and manually fill-in clock-frequency, thus making eSDHC work even with older u-boots. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Anton Vorontsov authored
This patch simply adds four eeprom nodes to MPC8548CDS' device tree. Signed-off-by:
-
Anton Vorontsov authored
MPC8377E-WLAN are basically RDB boards except: - RAM extended to 512 MB; - NAND flash removed, NOR flash extended to 64 MB; - Vitesse VSC7385 5-port switch removed, RTL8211B PHY added; - Power management MCU removed; - PCI slot removed, another mini-PCI slot added (IRQ routing changed); - USB3300 PHY's ID pin grounded, thus USB port is host-only. Signed-off-by:
-
Julia Lawall authored
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Julia Lawall authored
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
-
Heiko Schocher authored
- add I2C support - add FCC1 and FCC2 support - fix bogus gpio numbering in plattform code Signed-off-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
in case the interrupt controller was used in an earlier life then it is possible it is that some of its sources were used and are still unmask. If the (unmasked) device is active and is creating interrupts (or one interrupts was pending since the interrupts were disabled) then the boot process "ends" very soon. Once external interrupts are enabled, we land in -> do_IRQ -> call ppc_md.get_irq() -> ipic_read() gets the source number -> irq_linear_revmap(source) -> revmap[source] == NO_IRQ -> irq_find_mapping(source) returns NO_IRQ because no source is registered -> source is NO_IRQ, ppc_spurious_interrupts gets incremented, no further action. Signed-off-by:Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Julia Lawall authored
Check that the result of kmalloc/kzalloc is not NULL before dereferencing it. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by:
-
Roel Kluin authored
cam[tlbcam_index] is checked before tlbcam_index < ARRAY_SIZE(cam) Signed-off-by:
-
Kumar Gala authored
Added a device tree that should be similiar to mpc8536ds.dtb except the physical addresses for all IO are above the 4G boundary. Signed-off-by:
-
Kumar Gala authored
Change the top-level #address-cells and #size-cells to <2> so the mpc8536ds.dts is easier to deal with both a true 32-bit physical or 36-bit physical address space. Signed-off-by:
-
Stefan Roese authored
This patch adds support for the following devices to the Kilauea defconfig file: - PPC4xx NAND controller (NDFC) - I2C RTC (Dallas DS1338) - I2C HWMON (Dallas DS1775) Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Roese authored
This patch adds support for the following devices to the Canyonlands defconfig file: - NOR FLASH - PPC4xx NAND controller (NDFC) - I2C RTC (M41T80) Signed-off-by:
-
Stefan Roese authored
This patch adds support for the following devices to the Kilauea dts: - PPC4xx NAND controller (NDFC) - I2C RTC (Dallas DS1338) - I2C HWMON (Dallas DS1775) Additionally the partitioning of the NOR FLASH is changed. The dtb partition has been missing. Fixed in this patch. Signed-off-by:
-
Stefan Roese authored
Also some whitespace cleanup in the USB device nodes. Signed-off-by:
-
Stefan Roese authored
Signed-off-by:
-
Kumar Gala authored
Introduced a temporary variable into our iterating over the list cpus that are threads on the same core. For some reason Ben forgot how for loops work. Signed-off-by:
-
Benjamin Herrenschmidt authored
The mask used to encode the page table cache number in the batch when freeing page tables was too small for the new possible values of MMU page sizes. This increases it along with a comment explaining the constraints. Signed-off-by: -
Benjamin Herrenschmidt authored
This contains all the bits that didn't fit in previous patches :-) This includes the actual exception handlers assembly, the changes to the kernel entry, other misc bits and wiring it all up in Kconfig. Signed-off-by: -
Benjamin Herrenschmidt authored
The base TLB support didn't include support for SPARSEMEM_VMEMMAP, though we did carve out some virtual space for it, the necessary support code wasn't there. This implements it by using 16M pages for now, though the page size could easily be changed at runtime if necessary. Signed-off-by:
-
