- 10 Oct, 2007 40 commits
-
-
Holger Schurig authored
... and LBS_DEB_CMD for command execution. Also tidies misc comments to give a consistent output. Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Holger Schurig authored
... and LBS_DEB_CMD for command execution. Also tidies misc comments to give a consistent output. Signed-off-by:
-
Holger Schurig authored
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions. They contains the same info: the firmware command opcode and, when the firmware sends back a result, the command opcode ORed with 0x8000. Having the same data twice in the source code is redundant and can lead to errors (e.g. if you update or delete only one instance). This patch removed all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro. Signed-off-by:
-
Holger Schurig authored
Currently, when you define LBS_DEB_HEX, you get every hex dump in the whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This patch makes sure that you only get the hexdump that you're interested in. Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX() macros. Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes. As lbs_deb_hex() now prints the ":" after the prompt by itself, removed the misc colons in the various *.c files. lbs_deb_XXX() now print the debug category as well. As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the category, I removed various "11D:" prefixes in 11d.c as well. Signed-off-by:
-
Luis Carlos Cobo authored
echo 0 > /sys/class/net/mshX/autostart_enabled This is supported from Marvell firmware version 5.110.16.p0 (to be released). Signed-off-by:
Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by:
-
Holger Schurig authored
There is nowhere any place that set's this variable. Signed-off-by:
-
Holger Schurig authored
This changes the output of hardware related info from: libertas: GET_HW_SPEC: FWReleaseVersion- 5.0.11.p0 libertas: GET_HW_SPEC: Permanent addr- 0:16:41:72:f6:a8 libertas: GET_HW_SPEC: hwifversion=0x2 version=0x213 to: libertas: GET_HW_SPEC: FWReleaseVersion: 5.0.11.p0 libertas: GET_HW_SPEC: Permanent addr: 00:16:41:72:f6:a8 libertas: GET_HW_SPEC: hwifversion: 0x2, version: 0x213 Signed-off-by:
-
Holger Schurig authored
The CF/SDIO firmware doesn't support Mesh, so priv->mesh_dev is NULL there. Protect all accesses. Signed-off-by:
-
Holger Schurig authored
Usually constants defined by #define are in ALL_UPPERCASE. This patch fixes this. I also shuffled the bits around so that they match the bit positions in the host-interrupt-state register of the CF/SDIO card :-) Signed-off-by:
-
Holger Schurig authored
Some functions where declared in header files, but used only once. They are now static functions. After doing this, I found out that some functions weren't used at all. I removed this dead code. Signed-off-by:
-
Holger Schurig authored
adhoc_rates_b is only used locally, so make it static Signed-off-by:
-
Holger Schurig authored
Firmware download is quite different for different hardware. The SDIO and CF cards have two flat files that need to be downloaded, whereas the USB driver needs only one file, but with an internal structure. The code that handles this (USB only) structured file is currently in fw.c. This patch moves this code into if_usb.c. The remaining functions in fw.c have not much to do with firmware, they are various card- and network-stack initialisation functions. I've moved them into main.c. Signed-off-by:
-
Dan Williams authored
Remove unused/duplicated fields and consolidate static data rate arrays, for example the libertas_supported_rates[] and datarates[] arrays in the bss_descriptor structure, and the libertas_supported_rates field in the wlan_adapter structure. Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index functions and use them everywhere firmware requires a rate index rather than a rate array. The firmware requires the 4 basic rates to have the MSB set, but most other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB on basic rates when pushing rate arrays to firmware instead of doing a ton of (rate & 0x7f) everywhere. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
It's not USB specific, so move it out of the USB interface code. Signed-off-by:
-
Dan Williams authored
Mistakently introduced by a previous patch to upper-case all command constants. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Support for new mesh control knobs on firmware 5.220.11.p4: Signed-off-by:
-
Dan Williams authored
Remove the thread.h abstractions and opencode kthread stuff to make it clearer. Signed-off-by:
-
Dan Williams authored
Missed when fixing mixed-case structure field names. Signed-off-by:
-
Dan Williams authored
For readability. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Move the only function in it to if_usb.c, which was its only user anyway. Signed-off-by:
-
Luis Carlos Cobo authored
With this patch, scanning with mshX interface will only return mesh networks. To differentiate them, a specific mesh IE in beacons/probe responses is used. This IE has been introduced in firmware release 5.110.14. Note: Even though there can be at most a single mesh per channel, this scan might return several networks in the same channel. If all nodes in a mesh network are associated to an AP, they won't produce beacons/probe responses, thus the network will not be listed. This will be fixed in future firmware releases. Scan on ethX interface is not filtered, so it will list both mesh and non-mesh networks. Signed-off-by:
-
Dan Williams authored
Remove struct IE_WPA and just use direct checking of the IE bytes like ipw. Remove WLAN_802_11_VARIABLE_IEs because it's unused. Kill ieeetypes_elementid enum and just use MFIE_* from ieee80211.h. Also use struct ieee80211_info_element for scan buffer processing to simplify pointer usage. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
It doesn't touch hardware and therefore doesn't need endian notations either. Signed-off-by:
-
Dan Williams authored
Use standard BSS capability field constants from ieee80211.h. Signed-off-by:
-
Yoann Padioleau authored
Replacing accesses to dev->priv to netdev_priv(dev). The replacment is safe when netdev_priv is used to access a private structure that is right next to the net_device structure in memory. Cf http://groups.google.com/group/comp.os.linux.development.system/browse_thread/thread/de19321bcd94dbb8/0d74a4adcd6177bd This is the case when the net_device structure was allocated with a call to alloc_netdev or one of its derivative. Signed-off-by:
Yoann Padioleau <padator@wanadoo.fr> Cc: mcgrof@gmail.com Cc: linux-wireless@vger.kernel.org Cc: akpm@linux-foundation.org Signed-off-by:
-
Mariusz Kozlowski authored
Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by:
Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by:
-
Matthias Kaehlcke authored
The Host AP driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by:
Satyam Sharma <satyam@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Bill Nottingham authored
Currently the modinfo looks like: description: Support for Cisco/Aironet 802.11 wireless ethernet cards. Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs. Arguably, it should be cut at the end of the first sentence. This at least makes it somewhat more legible. Signed-off-by:
Bill Nottingham <notting@redhat.com> Signed-off-by:
-
Faidon Liambotis authored
pcmcia-cs/cardmgr is deprecated and mentioning it in the help text is misleading. Signed-off-by:
Faidon Liambotis <paravoid@debian.org> Signed-off-by:
-
Faidon Liambotis authored
Reorder the Atmel options so that the menu appears saner. Before: < > Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) <*> Atmel at76c50x chipset 802.11b support < > Atmel at76c506 PCI cards (NEW) < > Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards < > Atmel at76c502/at76c504 PCMCIA cards (NEW) After: < > Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) <*> Atmel at76c50x chipset 802.11b support < > Atmel at76c506 PCI cards (NEW) < > Atmel at76c502/at76c504 PCMCIA cards (NEW) < > Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards Signed-off-by:
-
Ulrich Kunitz authored
While in monitor mode the zd1211rw received only a limited set of packets. This patch forwards now all packets the device receives. Notify that while monitoring no FCS checks are done; so strange packets might appear in the network sniffer of your choice. ATTENTION: Support for multiple interfaces on a single ZD1211 device is currently broken. So this code works only on the first interface. Here is an example to put the device in monitor mode. iwconfig wlan0 mode monitor ifconfig wlan0 up iwconfig wlan0 channel 10 [dsd@gentoo.org: backport to mainline] Signed-off-by:
Ulrich Kunitz <kune@deine-taler.de> Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Michael Wu authored
This patch adds a mac80211 wireless driver for ADMtek ADM8211 based wireless cards. Signed-off-by:
Michael Wu <flamingice@sourmilk.net> Signed-off-by:
-
Johannes Berg authored
There are a few TODO comments in the mac80211 sources regarding hardware offload for Michael MIC verification. Those items are, however, better handled in the driver instead of the stack, if any device requires such hand-holding. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomas Winkler authored
tx.mode must be set also for buffered frames. It is used in the tx hanlders Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
