we cannot set the sampling rate of the device, but can only read it
from the board, so we don't need the member for it.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

the rmh bus is not used asynchronously, so it is safe to remove the
specific code pieces.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Simplify snd_pcm_drain() implementation and avoid unneeded array-
allocation for waitqueues.  Instead, one waitqueue is used for the
first draining stream, and wait until all streams finished.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* fix/hda:
  ALSA: hda - Fix MSI GX620 mixer
  ALSA: hda - Fix Dell S14 pin setup
  ALSA: hda - Fix IDT92HD83* codec setup
  ALSA: hda - Add support for HP dv6
  ALSA: hda - Fix HP/line-out initialization with IDT/STAC codecs
  ALSA: hda - Set default GPIO for IDT92HD71bxx
  ALSA: hda - Set default GPIO for STAC/IDT codecs
  ALSA: hda - Add missing model=auto entry for ALC269

* fix/asoc:
  ASoC: remove unused #include <linux/version.h>
  ASoC: S3C lrsync function made to work with IRQs disabled.
  ASoC: Fix display of stream name in DAPM debugfs
  ASoC: Clean up error handling in MPC5200 DMA setup

The headphone and speaker mixer elements aren't properly set for
MSI GX620 with targa-8ch-dig quirk.
Also fixed the speaker volume control for other ALC883-targa quirks,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove unused #include <linux/version.h>('s) in
  sound/soc/codecs/ad1836.c
  sound/soc/codecs/ad1938.c
  sound/soc/codecs/wm8974.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

s3c2412_snd_lrsync() maybe reached with IRQs disabled and if LRCLK
is dead due to improper initialization of CPU or CODEC, the system
gets stuck in the loop because jiffies may never get updated.
Implemented counter based wait mechanism for atleast the same
timeout period.
Signed-off-by: Jassi <jassi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The pin setup for Dell S14 quirk is rather wrong for the latest driver.
Fixed pin 0x0a, 0x0b, 0x0d and 0x0f.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove unnecessary (and buggy) init sequences left for IDT92HD83*
codecs in the previous fixes.  The DACs are now dynamically connected,
thus shouldn't be set statically in init verbs.  Also, the mono_nid
is detected dynamically, thus shouldn't be set staticaly, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Also display streams all the time while we're here.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Add the quirk entry for HP dv6.  Also add a workaround for the headphone
detection by setting hp_detect=1 beforehand.  Without this, the driver
won't do auto-muting because BIOS doesn't give any HP pin but only a
line-out pin.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It's possible that hp_detect is set even though no headphone pin is
detected.  The driver issues, however, an unsol event only to hp_pins[0],
which can be invalid.

This patch adds the check of the valid pin to send an unsol event
at initialization and resume callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A smiliar fix for IDT 92HD71Bxx codecs like the previous commit for
other IDT/STAC codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

IDT92HD73xx and STAC927x codecs use GPIO0 bit as EAPD on many machines.
However, currently we don't set it unless the model is specified just
for safety reason.  But, most machines do need this bit, so this safety
handling is rather annoying.

This patch enables GPIO0 setup as default for them.  Many HP / Dell
laptops should work even without model override with this change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Error handling code following a kzalloc should free the allocated data.
Error handling code following an ioremap should iounmap the allocated data.

The semantic match that finds the first problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

* topic/ymfpci:
  sound: ymfpci: increase timer resolution to 96 kHz

* topic/usb-audio:
  ALSA: usb-audio - Fix types taken in min()
  sound: usb-audio: do not make URBs longer than sync packet interval
  sound: usb-audio: add MIDI drain callback
  sound: usb-audio: use multiple output URBs
  sound: usb-audio: use multiple input URBs
  sound: usb-audio: Xonar U1 digital output support

* topic/tlv-minmax:
  ALSA: usb-audio - Correct bogus volume dB information
  ALSA: usb-audio - Use the new TLV_DB_MINMAX type
  ALSA: Add new TLV types for dBwith min/max

* topic/soundcore-preclaim:
  sound: make OSS device number claiming optional and schedule its removal
  sound: request char-major-* module aliases for missing OSS devices
  chrdev: implement __[un]register_chrdev()

* topic/snd-printk:
  ALSA: Fixed a typo of printk()
  ALSA: Add debug module option
  ALSA: core - strip too long file names in snd_print*()

* topic/pcm-estrpipe-in-pm:
  ALSA: pcm - Tell user that stream to be rewound is suspended

* topic/pcm-drain-nonblock:
  ALSA: pcm - Increase protocol version
  ALSA: pcm - Fix drain behavior in non-blocking mode

* topic/oxygen:
  sound: oxygen: work around MCE when changing volume

* topic/oss:
  ALSA: allocation may fail in	snd_pcm_oss_change_params()
  sound: vwsnd: Fix setting of cfgval and ctlval in li_setup_dma()
  sound: fix OSS MIDI output data loss

* topic/misc:
  ALSA: Remove unneeded ifdef from sound/core.h
  ALSA: Remove struct snd_monitor_file from public sound/core.h
  ALSA: Release v1.0.21

* topic/midi:
  sound: rawmidi: disable active-sensing-on-close by default
  sound: seq_oss_midi: remove magic numbers
  sound: seq_midi: do not send MIDI reset when closing
  seq-midi: always log message on output overrun

* topic/ice1724-pm:
  ALSA: ice1724 - Fix section mismatch
  ALSA: ice1724 - Patch for suspend/resume for Audiotrak Prodigy HD2

* topic/hdsp:
  ALSA: hdsp - allow proc reporting with disconnected io box

* topic/hda: (92 commits)
  ALSA: hda - Use auto model for HP laptops with ALC268 codec
  ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital
  ALSA: hda - Add support of Alienware M17x laptop
  ALSA: hda - Remove dead codes from patch_sigmatel.c
  ALSA: hda - Fix input source selection of IDT92HD73xx
  ALSA: hda - Fix obsolete CONFIG_SND_DEBUG_DETECT
  ALSA: hda - Unmute docking line-out as default with AD1984A codec
  ALSA: hda - Add another entry for Nvidia HDMI device
  ALSA: hda - Add missing GPIO initialization for AD1984A laptop model
  ALSA: hda - Add support of docking auto-mute/mic for AD1984A laptop model
  ALSA: hda - Fix ALC268/ALC269 headphone pin routing
  ALSA: hda - Create "Digital Mic Capture Volume" correctly for IDT codecs
  ALSA: hda - Add more quirk for HP laptops with AD1984A
  ALSA: hda - Add / fix model entries for HD-audio driver
  ALSA: hda - Add full audio support on Acer Aspire 7730G notebook
  ALSA: hda - Improve auto-cfg mixer name for ALC662
  ALSA: hda - Improve auto-cfg mixer name for ALC861-VD
  ALSA: hda - Improve auto-cfg mixer name for ALC262
  ALSA: hda - Improve auto-cfg mixer name for ALC260
  ALSA: hda - Improve auto-cfg mixer name for ALC880
  ...

* topic/dummy:
  ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
  ALSA: dummy - Add debug proc file
  ALSA: Add const prefix to proc helper functions
  ALSA: Re-export snd_pcm_format_name() function
  ALSA: dummy - Fake buffer allocations
  ALSA: dummy - Fix the timer calculation in systimer mode
  ALSA: dummy - Add more description
  ALSA: dummy - Better jiffies handling
  ALSA: dummy - Support high-res timer mode

* topic/dma-sgbuf:
  ALSA: Fix SG-buffer DMA with non-coherent architectures

* topic/ctxfi:
  ALSA: ctxfi - Simple code clean up
  ALSA: ctxfi - Native timer support for emu20k2

* topic/ctl-add-remove-fixes:
  sound: snd_ctl_remove_user_ctl: prevent removal of kernel controls
  sound: snd_ctl_remove_unlocked_id: simplify user control counting
  sound: snd_ctl_remove_unlocked_id: simplify error paths
  sound: snd_ctl_elem_add: fix value count check

* topic/cs46xx:
  ALSA: cs46xx - Fix minimum period size

* topic/cmi8330:
  ALSA: cmi8330: Allow MPU-401-less operation
  ALSA: cmi8330: find OPL3 port automatically
  cmi8330: Add basic CMI8329 support
  ALSA: cmi8330: revert comments about AD1848 back

* topic/cleanup:
  ALSA: info - Use krealloc()

* topic/azt3328:
  ALSA: azt3328: fix previous breakage, improve suspend, cleanups
  ALSA: azt3328: large codec cleanup, add I2S port etc.
  ALSA: azt3328: fix Kconfig entry

* topic/asoc: (226 commits)
  ASoC: au1x: PSC-AC97 bugfixes
  ASoC: Fix WM835x Out4 capture enumeration
  ASoC: Remove unuused hw_read_t
  ASoC: fix pxa2xx-ac97.c breakage
  ASoC: Fully specify DC servo bits to update in wm_hubs
  ASoC: Debugged improper setting of PLL fields in WM8580 driver
  ASoC: new board driver to connect bfin-5xx with ad1836 codec
  ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI
  ASoC: davinci: i2c device creation moved into board files
  ASoC: Don't reconfigure WM8350 FLL if not needed
  ASoC: Fix s3c-i2s-v2 build
  ASoC: Make platform data optional for TLV320AIC3x
  ASoC: Add S3C24xx dependencies for Simtec machines
  ASoC: SDP3430: Fix TWL GPIO6 pin mux request
  ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time
  ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop
  ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI
  OMAP: McBSP: Use textual values in DMA operating mode sysfs files
  ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510
  ASoC: Select core DMA when building for S3C64xx
  ...