- 15 Oct, 2008 23 commits
-
-
David S. Miller authored
Use offsetof() instead of home-brewed version. Based upon initial patch by Steven Whitehouse and suggestions by Ben Hutchings. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pedro Ribeiro authored
Problem observed: In IPv6, in the presence of multiple routers candidates to default gateway in one segment, each sending a different value of preference, the Linux hosts connected to the segment weren't selecting the right one in all the combinations possible of LOW/MEDIUM/HIGH preference. This patch changes two files: include/linux/icmpv6.h Get the "router_pref" bitfield in the right place (as RFC4191 says), named the bit left with this fix as "home_agent" (RFC3775 say that's his function) net/ipv6/ndisc.c Corrects the binary logic behind the updating of the router preference in the flags of the routing table Result: With this two fixes applied, the default route used by the system was to consistent with the rules mentioned in RFC4191 in case of changes in the value of preference in router advertisements Signed-off-by: Pedro Ribeiro <pribeiro@net.ipl.pt> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Katiyar authored
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Felix Fietkau authored
The hw_key pointer is used (and obviously NULL) after skb->cb is memset to 0. This patch grabs the iv_len before the memset call. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Florent Fourcot authored
The Belkin F5D7050rev5000de (id 050d:705e) has the Realtek RTL8187B chip and works with the 2.6.27 driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
This patch updates p54usb's device list. It adds the ID for SMC 2862W-G v2 and marks the "Spinnaker Proto board" as a first generation device. Reported-by: <jafg666@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Randy Dunlap authored
Fix kernel-doc warnings in mac80211.h. Fields need real explanations added to them. Warning(lin2627-g3-kdocfixes//include/net/mac80211.h:659): No description found for parameter 'icv_len' Warning(lin2627-g3-kdocfixes//include/net/mac80211.h:659): No description found for parameter 'iv_len' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
As I've reported, ath9k currently fails utterly when fragmentation is enabled. This makes ath9k "support" hardware fragmentation by not supporting fragmentation at all to avoid the double-free issue. The patch also changes mac80211 to report errors from the driver operation to userspace. That hack in ath9k should be removed once the rate control algorithm it has is fixed, and we can at that time consider removing the hw fragmentation support entirely since it's not used by any driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Manish Katiyar authored
Below patch removes the following warning during compilation. drivers/net/wireless/libertas/cmd.c:826: warning: unused variable 'old_channel' Signed-off-by : Manish Katiyar <mkatiyar@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jouni Malinen authored
ieee80211_bss_info_update() can return NULL. Verify that this is not the case before calling ieee802111_rx_bss_put() which would trigger an oops in interrupt context in atomic_dec_and_lock(). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
A similar problem was highlighted in the orinoco_cs driver by lockdep. This patch fixes the spectrum_cs driver. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Andrey Borzenkov authored
[ 6972.562035] ================================= [ 6972.562040] [ INFO: inconsistent lock state ] [ 6972.562048] 2.6.27-1avb #17 [ 6972.562053] --------------------------------- [ 6972.562060] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. [ 6972.562068] pm-suspend/17062 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 6972.562076] (&priv->lock){++..}, at: [<dfd4f05b>] orinoco_cs_resume+0x5b/0xd0 [orinoco_cs] [ 6972.562122] {in-hardirq-W} state was registered at: [ 6972.562128] [<c013ea6b>] __lock_acquire+0x6cb/0x1640 [ 6972.562171] [<c013fa3c>] lock_acquire+0x5c/0x80 [ 6972.562181] [<c02f6e39>] _spin_lock_irqsave+0x49/0x80 [ 6972.562210] [<dfd6425d>] orinoco_interrupt+0x4d/0x16d0 [orinoco] [ 6972.562257] [<c015a2b1>] handle_IRQ_event+0x31/0x60 [ 6972.562278] [<c015b73e>] handle_level_irq+0x6e/0xe0 [ 6972.562291] [<c0104b20>] do_IRQ+0xb0/0x130 [ 6972.562313] [<ffffffff>] 0xffffffff Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
If something goes wrong creating the debugfs dir or when debugfs is not compiled in, the current code might lead to trouble; make it more robust. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
If, for some reason, a netdev has no debugfs dir, we shouldn't try to rename that dir. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Robin Holt <holt@sgi.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch fixes ct kill configuration for 5350. Temperature units that HW expects are in Celsius not in kelvins. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
There's no checking that the HT IEs are of the right length which can be used by an attacker to cause an out-of-bounds access by sending a too short HT information/capability IE. Fix it by simply pretending those IEs didn't exist when too short. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
The commit entitled "p54: Fix sparse warnings" introduced a compile error on PPC architecture. Thanks to Johannes Berg <johannes@sipsolutions.net> for reporting this problem. Signed-off-by: <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When debugfs_create_dir fails, sta_info_debugfs_add_work will not terminate because it will find the same station again and again. This is possible whenever debugfs fails for whatever reason; one reason is a race condition in mac80211, unfortunately we cannot do much about it, so just document it, it just means some station may be missing from debugfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Robin Holt <holt@sgi.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rami Rosen authored
When CONFIG_IWLWIFI_DEBUG is not set and CONFIG_IWLWIFI is set, we get this compilation warning: /wireless-next-2.6/drivers/net/wireless/iwlwifi/iwl-agn-rs.c: In function 'rs_free_sta': /wireless-next-2.6/drivers/net/wireless/iwlwifi/iwl-agn-rs.c:2425: warning: unused variable 'priv' This patch fixes it by adding __maybe_unused attribute. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Reported by zOOmER.gm@gmail.com to work here: http://bugzilla.kernel.org/show_bug.cgi?id=11728Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 14 Oct, 2008 17 commits
-
-
Randy Macleod authored
From: "Randy Macleod" <macleodr@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
This patch removes the module dependency between ctnetlink and nf_nat by means of an indirect call that is initialized when nf_nat is loaded. Now, nf_conntrack_netlink only requires nf_conntrack and nfnetlink. This patch puts nfnetlink_parse_nat_setup_hook into the nf_conntrack_core to avoid dependencies between ctnetlink, nf_conntrack_ipv4 and nf_conntrack_ipv6. This patch also introduces the function ctnetlink_change_nat that is only invoked from the creation path. Actually, the nat handling cannot be invoked from the update path since this is not allowed. By introducing this function, we remove the useless nat handling in the update path and we avoid deadlock-prone code. This patch also adds the required EAGAIN logic for nfnetlink. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Ingo Molnar reported a build error with ebtables: ERROR: "ebt_register_table" [net/bridge/netfilter/ebtable_filter.ko] undefined! ERROR: "ebt_do_table" [net/bridge/netfilter/ebtable_filter.ko] undefined! ERROR: "ebt_unregister_table" [net/bridge/netfilter/ebtable_filter.ko] undefined! ERROR: "ebt_register_table" [net/bridge/netfilter/ebtable_broute.ko] undefined! ERROR: "ebt_do_table" [net/bridge/netfilter/ebtable_broute.ko] undefined! ERROR: "ebt_unregister_table" [net/bridge/netfilter/ebtable_broute.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 This reason is a missing dependencies that got lost during Kconfig cleanups. Restore it. Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Nir Tzachar <nir.tzachar@gmail.com> reported a warning when sending fragments over loopback with NAT: [ 6658.338121] WARNING: at net/ipv4/netfilter/nf_nat_standalone.c:89 nf_nat_fn+0x33/0x155() The reason is that defragmentation is skipped for already tracked connections. This is wrong in combination with NAT and ip_conntrack actually had some ifdefs to avoid this behaviour when NAT is compiled in. The entire "optimization" may seem a bit silly, for now simply restoring the lost #ifdef is the easiest solution until we can come up with something better. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ron Mercer authored
This ASIC does support all page sizes. For 4k and 8k page size the TX control block needs an external scatter gather list. For page sizes larger than 8k the max frags is satisfied by the original TX control block. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Cox authored
Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
git commit 45cec1ba "dsa: Need to select PHYLIB." causes this build bug on s390: drivers/built-in.o: In function `phy_stop_interrupts': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:631: undefined reference to `free_irq' /home/heicarst/linux-2.6/drivers/net/phy/phy.c:646: undefined reference to `enable_irq' drivers/built-in.o: In function `phy_start_interrupts': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:601: undefined reference to `request_irq' drivers/built-in.o: In function `phy_interrupt': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:528: undefined reference to `disable_irq_nosync' drivers/built-in.o: In function `phy_change': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:674: undefined reference to `enable_irq' /home/heicarst/linux-2.6/drivers/net/phy/phy.c:692: undefined reference to `disable_irq' PHYLIB has alread a depend on !S390, however select PHYLIB at DSA overrides that unfortunately. So add a depend on !S390 to DSA as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
LD net/ipv6/ipv6.o WARNING: net/ipv6/ipv6.o(.text+0xd8): Section mismatch in reference from the function inet6_net_init() to the function .init.text:ipv6_init_mibs() Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Dreier authored
I don't think the enic driver has anything to do with Mark Everett (http://en.wikipedia.org/wiki/A_Man_Called_E). Fix the Kconfig description. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Langer authored
The de2104x returns sometimes a wrong MAC address. The wrong one is like the original one, but it comes with an one byte shift. I found this bug on an older alpha ev5 cpu. More details are available in Gentoo bugreport #240718. It seems the hardware is sometimes a little bit too slow for an immediate access. This patch solves the problem by introducing a small udelay. Signed-off-by: Martin Langer <martin-langer@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
This patch fixes the following build error caused by commit ed94493f (mv643xx_eth: convert to phylib): <-- snip --> ... Building modules, stage 2. MODPOST 1280 modules ERROR: "genphy_restart_aneg" [drivers/net/mv643xx_eth.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Divy Le Ray authored
Update copyright banner to 2008. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Divy Le Ray authored
Add a field to the driver versioning info. Update version to 1.1.0. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix kernel-doc warning, missing description: Warning(lin2627-g3-kdocfixes//drivers/net/phy/mdio_bus.c:63): No description found for parameter 'd' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
Seems that skb goes into void unless something magic happened in pskb_expand_head in case of failure. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
The checks for ensuring that the array indices are inside the range were flipped. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-