- 10 Jul, 2006 40 commits
-
-
Jeff Dike authored
os_isatty can be made to disappear by moving maybe_sigio_broken from kernel to user code. This also lets write_sigio_workaround become static. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
The irq_spinlock is not needed from user code any more, so the irq_lock and irq_unlock wrappers can go away. This also changes the name of the lock to irq_lock. Signed-off-by:
-
Jeff Dike authored
Mark forward_interrupts as being tt-mode only. Signed-off-by:
-
Jeff Dike authored
uml_idle_timer is tt-mode only, so ifdef it as such to make it easier to spot when tt mode is killed. Signed-off-by:
-
Jeff Dike authored
Get rid of a user of timer_irq_inited (and first_tick) by observing that prev_ticks can be used to decide if this is the first call. Signed-off-by:
-
Jeff Dike authored
It turns out that init_new_thread_signals is always called with altstack == 1, so we can eliminate the parameter. Signed-off-by:
-
Jeff Dike authored
wall_to_monotonic isn't used in this file, so we can remove the declaration. Signed-off-by:
-
Jeff Dike authored
When UML is built as a static binary, it segfaults when run. The reason is that a memory hole that is present in dynamic binaries isn't there in static binaries, and it contains essential stuff. This fix removes the code which maps some anonymous memory into that hole and cleans up some related code. Signed-off-by:
-
Jeff Dike authored
Spotted by Al Viro - eliminate a couple useless exports. Signed-off-by:
-
Jeff Dike authored
This cleans up the mess that is the timer initialization. There used to be two timer handlers - one that basically ran during delay loop calibration and one that handled the timer afterwards. There were also two sets of timer initialization code - one that starts in user code and calls into the kernel side of the house, and one that starts in kernel code and calls user code. This eliminates one timer handler and consolidates the two sets of initialization code. [akpm@osdl.org: use new INTF_ flags] Signed-off-by:
-
Tyler authored
I was looking at the code of the UML and more precisely at the functions set_task_sizes_tt and set_task_sizes_skas. I noticed that these 2 functions take a paramater (arg) which is not used : the function is always called with the value 0. I suppose that this value might change in the future (or even can be configured), so I added a constant in mem_user.h file. Also, I rounded CONFIG_HOST_TASk_SIZE to a 4M. Signed-off-by:
Tyler <tyler@agat.net> Signed-off-by:
-
Irwan Djajadi authored
It already has .owner. Signed-off-by:
Irwan Djajadi <irwan.djajadi@iname.com> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by:
-
Eric Sesterhenn authored
Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
-
Linus Torvalds authored
Do not panic a machine when swsusp signature can't be read. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Andrew Morton authored
kernel/power/swap.c: In function 'swsusp_write': kernel/power/swap.c:275: warning: 'start' may be used uninitialized in this function gcc isn't smart enough, so help it. Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Rafael J. Wysocki authored
swsusp should not use memcpy for snapshotting memory, because on some architectures memcpy may increase preempt_count (i386 does this when CONFIG_X86_USE_3DNOW is set). Then, as a result, wrong value of preempt_count is stored in the image. Replace memcpy in copy_data_pages with an open-coded loop. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Andrew Morton authored
rtc_lock is supposed to be irq-safe. Signed-off-by:
-
Adrian Bunk authored
Matthew Wilcox notified me that CONFIG_PM_STD_PARTITION="/dev/hda2" in the i386 defconfig wasn't a good idea (especially since it prevented booting for him due to another bug). This patch sets CONFIG_PM_STD_PARTITION="" in the i386 defconfig. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by:
-
David Howells authored
Introduce the use of asm-offsets into the FRV architecture. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Add coredump capability for the ELF-FDPIC binfmt. Signed-off-by:
-
David Howells authored
Move the roundup() macro from binfmt_elf.c into linux/kernel.h as it's generally useful. [akpm@osdl.org: nuke all the other implementations] Signed-off-by:
-
David Howells authored
Add definitions for SEEK_SET, SEEK_CUR and SEEK_END to the kernel header files. Signed-off-by:
-
David Howells authored
Adjust the ELF-FDPIC binfmt driver to conform much more to the CodingStyle, silly though it may be. Further changes: (*) Drop the casts to long for addresses in kdebug() statements (they're unsigned long already). (*) Use extra variables to avoid expressions longer than 80 chars by splitting the statement into multiple statements and letting the compiler optimise them back together. (*) Eliminate duplicate call of ksize() when working out how much space was actually allocated for the stack. (*) Discard the commented-out load_shlib prototype and op pointer as this will not be supported in ELF-FDPIC for the foreseeable future. Signed-off-by: -
David Howells authored
Fix execution through the FDPIC binfmt of programs stored on ramfs by preventing the ramfs mmap() returning successfully on a private mapping of a ramfs file. This causes NOMMU mmap to make a copy of the mapped portion of the file and map that instead. This could be improved by granting direct mapping access to read-only private mappings for which the data is stored on a contiguous run of pages. However, this is only likely to be the case if the file was extended with truncate before being written. ramfs is left to map the file directly for shared mappings so that SYSV IPC and POSIX shared memory both still work. Signed-off-by:
-
David Howells authored
Fix some FRV arch compile errors, including: (*) Marking nr_kernel_pages as __meminitdata so that references to it end up being properly calculated rather than being assumed to be in the small data section (and thus calculated wrt the GP register). Not doing this causes the linker to emit errors as the offset is too big to fit into the load instruction. (*) Move pm_power_off into an unconditionally compiled .c file as it's now unconditionally accessed. (*) Declare frv_change_cmode() in a header file rather than in a .c file, and declare it asmlinkage. Signed-off-by: -
David Howells authored
Fix FDPIC compile errors. (akpm: we suspect it fixes a warning) Signed-off-by:
-
Zhang, Yanmin authored
Sometimes, applications need below call to be successful although "/mnt/hugepages/file1" doesn't exist. fd = open("/mnt/hugepages/file1", O_CREAT|O_RDWR, 0755); *addr = mmap(NULL, 0x1024*1024*256, PROT_NONE, 0, fd, 0); As for regular pages (or files), above call does work, but as for huge pages, above call would fail because hugetlbfs_file_mmap would fail if (!(vma->vm_flags & VM_WRITE) && len > inode->i_size). This capability on huge page is useful on ia64 when the process wants to protect one area on region 4, so other threads couldn't read/write this area. A famous JVM (Java Virtual Machine) implementation on IA64 needs the capability. Signed-off-by:Zhang Yanmin <yanmin.zhang@intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Hugh Dickins <hugh@veritas.com> [ Expand-on-mmap semantics again... this time matching normal fs's. wli ] Acked-by:
William Lee Irwin III <wli@holomorphy.com> Signed-off-by:
-
Alan Stern authored
We all failed to notice that Franck's recent update to usb-storage allowed an URB to complete after its context data was no longer valid. This patch (as746) makes the driver wait for the URB to complete whenever there's a timeout. Although timeouts in usb-storage are relatively uncommon, they do occur. Without this patch the code in 2.6.18-rc1 will fault within an interrupt handler, which is not nice at all. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Linas Vepstas authored
The pci channel state is currently uninitialized, thus there are two ways of indicating that "everything's OK": 0 and 1. This is a bit of a burden. If a devce driver wants to check if the pci channel is in a working or a disconnected state, the driver writer must perform checks similar to if((pdev->error_state != 0) && (pdev->error_state != pci_channel_io_normal)) { whatever(); } which is rather akward. The first check is needed because stuct pci_dev is inited to all-zeros. The scond is needed because the error recovery will set the state to pci_channel_io_normal (which is not zero). This patch fixes this awkwardness. Signed-off-by:Linas Vepstas <linas@austin.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Michael Hanselmann authored
This patch fixes several problems: - pmac_backlight_key() is called under interrupt context, and therefore can't use mutexes or semaphores, so defer the backlight level for later, as it's not critical (original code by Aristeu S. Rozanski F. <aris@valeta.org>). - Add exports for functions that might be called from modules - Fix Kconfig depdencies on PMAC_BACKLIGHT. - Fix locking issues on calls from inside the driver (reported by Aristeu S. Rozanski F., too) - Fix wrong calculation of backlight values in some of the drivers - Replace pmac_backlight_key_up/down by inline functions [akpm@osdl.org: fix function prototypes] Signed-off-by:
Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by:
Aristeu S. Rozanski F. <aris@valeta.org> Acked-by:
Rene Nussbaumer <linux-kernel@killerfox.forkbomb.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Segher Boessenkool authored
This patch fixes a bit of boundchecking in the new Open Firmware interrupt tree parsing code. It's important that it fails when things aren't correct in order to trigger fallback mecanisms that are necessary to make some machines work properly. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
The SMU driver tries to map an interrupt from the device-tree before the interrupt controllers in the machine have been enumerated. This doesn't work properly and cause machines like the Quad g5 to fail booting later on when some drivers waits endlessly for an SMU request to complete. This is the second problem preventing boot on the Quad g5. This fixes it and also makes the SMU driver a bit more resilient to not having an interrupt. Signed-off-by:
-
Benjamin Herrenschmidt authored
The quad g5 currently doesn't boot due to two problems. This patch fixes the first one: Apple new way of doing interrupt specifiers in OF for devices using the HT APIC isn't properly parsed by the new MPIC driver code. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by:
-
Johannes Berg authored
This patch adds the bass/treble controls to snd-aoa that snd-powermac always had for tas3004 based machines. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
The layout fabric gained support for all IDs when I extracted those from the OSX description file. But apparently I had forgotten to add them all as module aliases so the module will also load. This patch adds them. Signed-off-by:
-
Johannes Berg authored
This patch makes the DRC control visible again for TAS chips. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch fixes the initialisation and reset of the tas codec. The tas will often reset if the i2s clocks go away so it needs to be completely re-initialised when clocks come back. Also, this patch adds some code for DRC that will be exploited later to add a DRC control again, fixing a regression over snd-powermac. Signed-off-by:
-
Johannes Berg authored
This patch changes the PCM1 control name to PCM to make it play nice with the softvol plugin (which will then go away if it sees a proper PCM slider) Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch cleans up the printk's in the layout fabric and also makes it display which type of GPIO access it is going to use. Signed-off-by:
-
