- 07 May, 2009 33 commits
-
-
Vladimir Barinov authored
Add NAND support for MX27ADS board Signed-off-by:
Vladimir Barinov <vbarinov@embeddedalley.com> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de>
-
Vladimir Barinov authored
Setup all pins at once in one table Signed-off-by:
-
Magnus Lilja authored
This patch adds the SMSC platform device to the Litekit board. Signed-off-by:
Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by:
-
Magnus Lilja authored
Several comments in board config files stated "mandatory for CONFIG_LL_DEBUG" but the correct name is CONFIG_DEBUG_LL. Signed-off-by:
-
Magnus Lilja authored
Signed-off-by:
-
Magnus Lilja authored
Signed-off-by:
-
Valentin Longchamp authored
This support both sdhc1 and sdhc2 with WP and CD for the marxbot and devboard mx31moboard baseboards. sdhc2 is present on both, but is not directly included in the mx31moboard file because a third baseboard (not supported yet) without sdhc2 is planned. Changes since v1: removed pin initialization from init/exit function and taken different comments into account Changes since v2: pin initialiation now is done in another patch for all current mx31moboard pins Signed-off-by:
Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by:
-
Valentin Longchamp authored
Changes since v1: all the pins needed for the drivers are claimed in another patch Signed-off-by:
-
Valentin Longchamp authored
As suggested by Sascha, here we setup all the pins that we are using in the current (and currently reviewed) drivers for mx31moboard system. changes since v1: changed I2C1 pin names Signed-off-by:
-
Valentin Longchamp authored
As suggested by Sascha, I regroup them in a single patch so that the other patches become more orthogonal. changes since v1: changed I2C1 pin names Signed-off-by:
-
Alan Carvalho de Assis authored
This hw-random driver add support to RNGA hardware found on some i.MX processors. Signed-off-by:
Alan Carvalho de Assis <acassis@gmail.com> Acked-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Valentin Longchamp authored
Various improvements (includes in alphabetical order, platform devices declaration order change, ...) The pins now are claimed in a single function call from a main table for every board for a better clarity and to adopt the current agreement for mx31 devices. Signed-off-by:
-
Fabio Estevam authored
This patch adds basic support to MX27PDK board http://www.freescale.com/imx27pdk ). Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Ivo Clarysse authored
Adds a defconfig file for the i.MX21 SoC, targeting the Freescale i.MX21ADS (M9328MX21ADSE) Application Development System. Signed-off-by:
Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by:
-
Holger Schurig authored
* Kconfig enables now HAVE_PWM (this enables in turn the selection of CONFIG_BACKLIGHT_PWM) * changes CONFIG_ARCH_MXyy to CONFIG_MACH_MXyy * fix some register names to match those of the reference manual * write a stub code so that the PWM can be used to program the LCD backlight * convert from #ifdef CONFIG_ARCH_MXxx to cpu_is_mxXX() * remove unneeded defines and fix 80-column "violations" of checkpatch.pl Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by:
-
Ivo Clarysse authored
[PATCH v6] MXC: mx21ads base support Base machine support for the Freescale i.MX21ADS (M9328MX21ADSE) Application Development System. Signed-off-by:
-
Guennadi Liakhovetski authored
Add support for a QVGA Sharp LCD on pcm037. Signed-off-by:
Guennadi Liakhovetski <lg@denx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
MXC GPIO controller does not support generation of interrupts on both edges. Emulate this mode in software by reconfiguring the irq trigger polarity on each interrupt. This follows an example of drivers/mfd/asic3.c. Signed-off-by:
-
Holger Schurig authored
Signed-off-by:
-
Sascha Hauer authored
arch-imx is superseeded by the MXC architecture support. This patch removes arch/arm/mach-imx from the kernel. Signed-off-by: -
Sascha Hauer authored
arch-imx is superseeded by the MXC architecture support. This patch removes arch-imx from the build system. Signed-off-by: -
Sascha Hauer authored
Currently we depend on hardcoded base addresses for the interrupt controller. This prevents us from compiling in more than one i.MX architecture at a time. This patch changes the base address to a runtime calculated one. Signed-off-by: -
Sascha Hauer authored
Currently we depend on hardcoded base addresses for the timer. This prevents us from compiling in more than one i.MX architecture at a time. This patch changes the base address to a runtime calculated one. Signed-off-by: -
Sascha Hauer authored
This allows us to have more mapping functions for more than one i.MX architecture in the kernel. As this is the earliest board specific hook we have, also use it to set the cpu type. Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
It is no longer present in newer cores. Unfortunately Freescale decided to put the bit which decides between automotive clock path and consumer clock path in the automotive clock path direction. With current code we cannot detect the core revision, so just remove automotive path completely. Signed-off-by: -
Sascha Hauer authored
The PCM043 is a i.MX35 based board from Phytec also known as the phyCORE-i.MX35. Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by: -
Sascha Hauer authored
Signed-off-by:
-
- 05 May, 2009 7 commits
-
-
Magnus Lilja authored
The i.MX31 ARM11 core is not a v6K core. Disable this option as it is incompatible with non v6K cores. Signed-off-by:
-
Sascha Hauer authored
Signed-off-by: -
Uwe Kleine-König authored
Before this patch I got the following line in my dmesg: [ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space VMALLOC_END is 0xf4000000 and there are the following other mappings defined for mx27ads: (0xa0500000,+0x00001000) maps to 0xffff0000 (0x10000000,+0x00100000) maps to 0xf4000000 (0x80000000,+0x00100000) maps to 0xf4100000 (0xd8000000,+0x00100000) maps to 0xf4200000 So map PBC to 0xf4300000. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Sascha Hauer authored
On i.MX31 I sometimes get spurious interrupts. There is no need to crash the whole system when this happens. Instead, silently ignore it. Signed-off-by: -
Valentin Longchamp authored
We want to have a mx31_defconfig file that builds a kernel that is able to boot on all support mx31 systems and thus also can be better tested by automatic build scripts. For these reasons, this config file is not needed anymore. Signed-off-by:
-
Guennadi Liakhovetski authored
All i.MX platforms support <linux/clk.h> calls and should select HAVE_CLK. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Martin Fuzzey authored
On MX2 platforms imx_dma_request() calls request_irq() which may sleep with interrupts disabled. Signed-off-by:
Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by:
-
