- 16 Feb, 2007 10 commits
-
-
Ingo Molnar authored
There are loads of fat functions hidden in jiffies.h. Uninline them. No code changes. [jeremy@goop.org: export fix] Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
john stultz authored
Distangle the NTP update from HZ. This is necessary for dynamic tick enabled kernels. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Thomas Gleixner authored
Provide funtions to: - check, whether an interrupt can set the affinity - pin the interrupt to a given cpu Necessary for the ability to setup clocksources more flexible (e.g. use the different HPET channels per CPU) [akpm@osdl.org: alpha build fix] Signed-off-by:
-
Thomas Gleixner authored
Add a flag so we can prevent the irq balancing of an interrupt. Move the bits, so we have room for more :) Necessary for the ability to setup clocksources more flexible (e.g. use the different HPET channels per CPU) Signed-off-by:
-
Andrew Morton authored
arch/i386/kernel/built-in.o: In function `vmi_stop_hz_timer': : undefined reference to `next_timer_interrupt' If CONFIG_NO_HZ, next_timer_interrupt() doesn't exist (and presumably doesn't make sense). Perhaps VMI shouildn't be playing with timer internals at this level. Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Adrian Bunk authored
Advanced Mathematics, lesson 1: 101 != 105 ;-) Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Jeff Dike authored
A previous cleanup misused need_poll, which had a fairly broken interface. It implemented a growable array, changing the used elements count itself, but leaving it up to the caller to fill in the actual elements, including the entire array if the array had to be reallocated. This worked because the previous users were switching between two such structures, and the elements were copied from the inactive array to the active array after making sure the active array had enough room. maybe_sigio_broken was made to use need_poll, but it was operating on a single array, so when the buffer was reallocated, the previous contents were lost. This patch makes need_poll implement more sane semantics. It merely assures that the array is of the proper size and that the contents are preserved. It is up to the caller to adjust the used elements count and to ensure that the proper elements are resent. This manifested itself as a hang in 2.6.20 as the uninitialized buffer convinced UML that one of its own file descriptors didn't support SIGIO and needed to be watched by poll in a separate thread. The result was an interrupt flood as control traffic over this descriptor sparked interrupts, which resulted in more control traffic, ad nauseum. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> Signed-off-by:
-
Dmitriy Monakhov authored
If prepare_write or commit_write return AOP_TRUNCATED_PAGE we jump to "retry" label and than if find_or_create_page() failed function return incorrect error code. Signed-off-by:
Dmitriy Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Frederik Deweerdt authored
It appears that the pcim_iomap_regions() function doesn't get the error handling right. It BUGs early at boot with a backtrace along the lines of: ahci_init pci_register_driver driver_register [...] ahci_init_one pcim_iomap_region pcim_iounmap The following patch allows me to boot. Only the if(mask..) continue; part fixes the problem actually, the gotos where changed so that we don't try to unmap something we couldn't map anyway. Signed-off-by:
Frederik Deweerdt <frederik.deweerdt@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
David Brownell authored
Small updates to the GPIO documentation, addressing feedback and fixing a few spelling errors. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
- 15 Feb, 2007 14 commits
-
-
Nate Dailey authored
This modifies drivers/ata/sata_vsc.c to only set the cache line size to 0x80 if the default value is zero. Apparently zero isn't allowed due to a bug in the chip, but I've found performance is much better with the (non-zero) default instead of 0x80. [note1: "default" means BIOS-programmed value, in this context -jgarzik] [note2: superfluous braces were removed from the patch -jg] Signed-off-by:
Nate Dailey <nate.dailey@stratus.com> Signed-off-by:
Jeremy Higdon <jeremy@sgi.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Robert Hancock authored
ADMA-capable controllers provide a bit in the status register that appears to indicate that the controller detected an SError condition. Update sata_nv to detect this and trigger error handling in order to handle the fault. Signed-off-by:
Robert Hancock <hancockr@shaw.ca> Signed-off-by:
-
Olaf Hering authored
The hald media changed polling does really confuse things. Noone knows why the delays are needed, but they give us access to the CD. An udelay(50) will give reliable access to the drive, but there is still one (or more) EH reset. The drive works without EH resets with udelay(100). Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Zhang, Yanmin authored
If an ATA drive uses legacy mode, ata driver will choose 14 and 15 as the fixed irq number. On ia64 platform, such numbers are GSI and should be converted to irq vector. Below patch against kernel 2.6.20 fixes it. Signed-off-by:
Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by:
-
Tejun Heo authored
Some devices chock if Feature is not clear when IDENTIFY is issued. Set ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE for IDENTIFY such that whole TF is cleared when reading ID data. Kudos to Art Haas for testing various futile patches over several months and Mark Lord for pointing out the fix. Signed-off-by:
Tejun Heo <htejun@gmail.com> Cc: Art Haas <ahaas@airmail.net> Cc: Mark Lord <mlord@pobox.com> Signed-off-by:
-
Alan Cox authored
This is the first preparation to doing the !IORDY cases properly. Further diffs will then add the needed logic to do it right. Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by:
-
Tejun Heo authored
The 80c wire bit is bit 13, not 14. Bit 14 is always 1 if word93 is implemented. This increases the chance of incorrect wire detection especially because host side cable detection is often unreliable and we sometimes soley depend on drive side cable detection. Fix the test and add word93 validity check. Signed-off-by:
-
Mikael Pettersson authored
This patch updates the sata_promise driver to use new-style libata error handling for 20619 (TX4000) chips. sata_promise already uses new EH for the other chips it supports, so the patch is quite simple: * remove ->phy_reset and ->eng_timeout ops from pdc_pata_ops, and instead bind ->freeze, ->thaw, ->error_handler, and ->post_internal_cmd to existing new EH functions * drop ATA_FLAG_SRST from board_20619's flags * remove now unused pdc_pata_phy_reset() and pdc_eng_timeout() Tested on a TX4000 with both modern working disks and old/quirky disks. Also used a CD-RW drive to test reading and writing CDs. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
-
Mikael Pettersson authored
This patch fixes an oversight which caused sata_promise to not perform cable detection on the TX2plus chips' PATA ports. Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (35 commits) sh: rts7751r2d board updates. sh: Kill off dead bigsur and ec3104 boards. sh: Fixup r7780rp pata_platform for devres conversion. sh: Revert TLB miss fast-path changes that broke PTEA parts. sh: Compile fix for heartbeat consolidation. sh: heartbeat consolidation for banked LEDs. sh: define dma noncoherent API functions. sh: Missing flush_dcache_all() proto in cacheflush.h. sh: Kill dead/unused ISA code from __ioremap(). sh: Add cpu-features header to asm/Kbuild. sh: Move __KERNEL__ up in asm/page.h. sh: Fix syscall numbering breakage. sh: dcache write-back for R7780RP PIO. sh: Switch to local TLB flush variants in additional callsites. sh: Local TLB flushing variants for SMP prep. sh: Fixup cpu_data references for the non-boot CPUs. sh: Use a per-cpu ASID cache. sh: add SH_CLK_MD Kconfig default. sh: Fixup SHMIN INTC register definitions. sh: SH-DMAC compile fixes ...
-
Nick Piggin authored
My mincore also forgot about crossing vmas. Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Nick Piggin authored
Paper bag time. Thanks to Randy for noticing that I didn't actually assign 'present' to anything. Unfortunately my original patch passed the few simple test cases I gave it, purely by coincidence. Signed-off-by:
-
Nick Piggin authored
Fix mincore-anon patch to compile with CONFIG_SWAP=n Signed-off-by:
-
Paul Mundt authored
This tidies up some of the rts7751r2d mess and gets it booting again. Update the defconfig, too. Signed-off-by:
Masayuki Hosokawa <hosokawa@ace-jp.com> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
- 14 Feb, 2007 16 commits
-
-
Linus Torvalds authored
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] version 1.0.14rc2 [ALSA] Fix a typo in __dev* changes in portman2x4.c [ALSA] Change AT91 PDC register defines for 2.6.20 kernel [ALSA] SoC codecs - fix Kconfig - depends -> depends on [ALSA] Fix __devinit and __devexit issues with sound drivers [ALSA] hda-codec - Patch for enabling LFE on more Dell laptops [ALSA] hda-codec - More fixes for Conexant HD Audio support [ALSA] usb-audio: add PCR-A PCM support [ALSA] emu10k1: fix typo [ALSA] usbaudio - remove urb->bandwidth reference [ALSA] ac97 - Fix silent output problem with Cx20551 codec [ALSA] hda-codec - Fix Oops with probing sigmatel codec chips
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (94 commits) [PATCH] x86-64: Remove mk_pte_phys() [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386 [PATCH] i386: fix 32-bit ioctls on x64_32 [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64 [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header. [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c [PATCH] i386: Move mce_disabled to asm/mce.h [PATCH] i386: paravirt unhandled fallthrough [PATCH] x86_64: Wire up compat epoll_pwait [PATCH] x86: Don't require the vDSO for handling a.out signals [PATCH] i386: Fix Cyrix MediaGX detection [PATCH] i386: Fix warning in cpu initialization [PATCH] i386: Fix warning in microcode.c [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo [PATCH] i386: Remove fastcall in paravirt.[ch] [PATCH] x86-64: Fix wrong gcc check in bitops.h [PATCH] x86-64: survive having no irq mapping for a vector [PATCH] i386: geode configuration fixes [PATCH] i386: add option to show more code in oops reports ...
-
Eric W. Biederman authored
Since the security checks are applied on each read and write of a sysctl file, just like they are applied when calling sys_sysctl, they are redundant on the standard VFS constructs. Since it is difficult to compute the security labels on the standard VFS constructs we just mark the sysctl inodes in proc private so selinux won't even bother with them. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Stephen Smalley authored
Hmmm...turns out to not be quite enough, as the /proc/sys inodes aren't truly private to the fs, so we can run into them in a variety of security hooks beyond just the inode hooks, such as security_file_permission (when reading and writing them via the vfs helpers), security_sb_mount (when mounting other filesystems on directories in proc like binfmt_misc), and deeper within the security module itself (as in flush_unauthorized_files upon inheritance across execve). So I think we have to add an IS_PRIVATE() guard within SELinux, as below. Note however that the use of the private flag here could be confusing, as these inodes are _not_ private to the fs, are exposed to userspace, and security modules must implement the sysctl hook to get any access control over them. Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
-
Eric W. Biederman authored
I goofed and when reenabling the fine grained selinux labels for sysctls and forgot to add the "/sys" prefix before consulting the policy database. When computing the same path using proc_dir_entries we got the "/sys" for free as it was part of the tree, but it isn't true for clt_table trees. Signed-off-by:
-
Eric W. Biederman authored
It isn't needed anymore, all of the users are gone, and all of the ctl_table initializers have been converted to use explicit names of the fields they are initializing. [akpm@osdl.org: NTFS fix] Signed-off-by:
-
Eric W. Biederman authored
Add a parent entry into the ctl_table so you can walk the list of parents and find the entire path to a ctl_table entry. Signed-off-by:
-
Eric W. Biederman authored
With this change the sysctl inodes can be cached and nothing needs to be done when removing a sysctl table. For a cost of 2K code we will save about 4K of static tables (when we remove de from ctl_table) and 70K in proc_dir_entries that we will not allocate, or about half that on a 32bit arch. The speed feels about the same, even though we can now cache the sysctl dentries :( We get the core advantage that we don't need to have a 1 to 1 mapping between ctl table entries and proc files. Making it possible to have /proc/sys vary depending on the namespace you are in. The currently merged namespaces don't have an issue here but the network namespace under /proc/sys/net needs to have different directories depending on which network adapters are visible. By simply being a cache different directories being visible depending on who you are is trivial to implement. [akpm@osdl.org: fix uninitialised var] [akpm@osdl.org: fix ARM build] [bunk@stusta.de: make things static] Signed-off-by:
-
Eric W. Biederman authored
Signed-off-by:
-
Eric W. Biederman authored
The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by:
-
Eric W. Biederman authored
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Acked-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Eric W. Biederman authored
parse_table has support for calling a strategy routine when descending into a directory. To date no one has used this functionality and the /proc/sys interface has no analog to it. So no one is using this functionality kill it and make the binary sysctl code easier to follow. Signed-off-by:
-
Eric W. Biederman authored
There are currently no users in the kernel for CTL_ANY and it only has effect on the binary interface which is practically unused. So this complicates sysctl lookups for no good reason so just remove it. Signed-off-by:
-
Eric W. Biederman authored
binfmt_misc has a mount point in the middle of the sysctl and that mount point is created as a proc_generic directory. Doing it that way gets in the way of cleaning up the sysctl proc support as it continues the existence of a horrible hack. So instead simply create the directory as an ordinary sysctl directory. At least that removes the magic special case. [akpm@osdl.org: warning fix] Signed-off-by:
-
Eric W. Biederman authored
This is just a simple cleanup to keep kernel/sysctl.c from getting to crowded with special cases, and by keeping all of the ipc logic to together it makes the code a little more readable. [gcoady.lk@gmail.com: build fix] Signed-off-by:
Grant Coady <gcoady.lk@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
This is just a simple cleanup to keep kernel/sysctl.c from getting to crowded with special cases, and by keeping all of the utsname logic to together it makes the code a little more readable. Signed-off-by:
-
