The usage of the external oscillator is handled already by
sleep_block and doesn't require any extra checking.
Incidentally this fixes a bug where N800 wouldn't enter retention
the first time the display would blank.
Signed-off-by: Klaus Pedersen <klaus.k.pedersen@nokia.com>
Signed-off-by: Igor Stoppa <igor.stoppa@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The current OMAP2 clock management code uses a magic number, 0xff, to
indicate that the clock's parent will handle enabling and disabling the
clock.  Move the magic number into a symbolic constant for readability.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The *_CONTROL_STATUS defines in include/asm-arm/arch-omap/omap24xx.h
are shared between 2420 and 2430, so merge and rename those
defines to reflect that.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Some of the .rate_offset lines in clock.h have whitespace problems;
fix them.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

A few of the clock definitions in mach-omap2/clock.h list the
.enable_bit member before .enable_reg.  This fixes those to conform
with the order used in the rest of the file.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds platform device for use of existing OMAP2 driver.  Also, fixes up
GPMC defines which are different between 2420 and 2430.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix warning

drivers/video/omap/lcdc.c:878: warning: initialization from
incompatible pointer type
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

mach-omap2/clock.c contains a suspicious assignment that
almost certainly should be a equality test, in omap2_get_clksel().
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

- Enable Blizzard, EAC and TSC2301 drivers
- Disable support for omap_generic boards
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Omap2430 has additional support for high-speed I2C.

This patch moves I2C speed parameter (from module) to platform data.
Also added basic High Speed support based on I2C bus speed.
Signed-off-by: Syed Mohammed Khasim  <x0khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add omap2430 watchdog IO mapping
Signed-off-by: Nishanth Menon <menon.nishanth@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This enables non-MPU MMU(camere,iva,dsp) to use H/W page table
walk. It will be free from the limitation of TLB entries in order to
manage device's vm area.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

- Add explicit I2S master and slave modes
- Do not configure bit-clock and frame sync direction according to polarity
  changed I2S mode as it was done in programming model but according to
  master/slave mode
- Activate codec port transparent DMA only when EAC is I2S slave
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Automerge again until it's fixed in upstream patch queue..
Signed-off-by: Tony Lindgren <tony@atomide.com>

Omap2430 has additional support for high-speed I2C.

This patch moves I2C speed parameter (from module) to platform data.
Also added basic High Speed support based on I2C bus speed.

This patch is tested for high speed I2C (with TWL4030 Keypad) and works as
expected.
Signed-off-by: Syed Mohammed Khasim  <x0khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Resubmitting after incorporating review comments

This patch contains the formatting changes.
Signed-off-by: Syed Mohammed Khasim  <x0khasim@ti.com>

Files:
 drivers/i2c/busses/i2c-omap.c
=============================================================================
Signed-off-by: Tony Lindgren <tony@atomide.com>

Modfied watchdog driver to use base address provided in platform defn
Cleaned up a bunch of statics used.
Added 2430 baseaddress defn
Addressed review comments for patch1 and 2 reported by Trilok Soni and Tony
Signed-off-by: Nishanth Menon <menon.nishanth@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Conflicts:

	arch/arm/configs/omap_h2_1610_defconfig
	arch/arm/configs/omap_osk_5912_defconfig
	arch/arm/mach-omap1/board-h2.c
	arch/arm/mach-omap2/Kconfig
	arch/arm/mach-omap2/Makefile
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-n800-dsp.c
	arch/arm/mach-omap2/board-n800-usb.c
	arch/arm/plat-omap/Kconfig
	arch/arm/plat-omap/Makefile
	arch/arm/plat-omap/devices.c
	drivers/Makefile
	drivers/i2c/chips/gpio_expander_omap.c
	drivers/i2c/chips/menelaus.c
	drivers/i2c/chips/tlv320aic23.c
	drivers/mtd/onenand/omap2.c
	drivers/video/omap/omapfb_main.c
	include/asm-arm/arch-omap/dsp.h
	include/asm-arm/hardware/tsc2101.h
	net/ipv4/netfilter/ipt_IDLETIMER.c

Add DSP common code for OMAP. This patch adds code to idle the
OMAP DSP.
Signed-off-by: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This adds a driver for TSC2301 including support for audio, keypad and
touchscreen. Patch is originally developed for Nokia N800 by Imre Deak,
Jarkko Nikula, Jarkko Oikarinen and Juha Yrjola.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>

This adds a driver for the TSC2102 chip by Texas Instruments. This
driver is responsible for all communication with the chip and doesn't
export anything for user-space, but for other drivers controlling
devices connected to the chip.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>

The new driver is functionally the same as the old
drivers/ssi/omap-tsc2101 driver in the linux-omap tree.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>

Add an SPI master driver for the OMAP2 McSPI controller
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Add onenand support for omap24xx
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>

Each matching packet resets the timer associated with input and/or output
interfaces. Timer expiry causes a kobject uevent. Idle timer can be read via
sysfs.
Signed-off-by: Hiroshi DOYU <hiroshi.doyu@nokia.com>
Signed-off-by: Juha Yrjölä <juha.yrjola@nokia.com>

Updated for 2.6.21-rc1 by Arnaud Patard.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add code to detect errors caused by bad memory timings
Signed-off-by: Tony Lindgren <tony@atomide.com>

8250 changes for omap
Signed-off-by: Tony Lindgren <tony@atomide.com>

Level handling is different for omap1 and omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add Nokia CBUS support
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Merge omap i2c drivers from omap-historic
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for OMAP framebuffer
Signed-off-by: Imre Deak <imre.deak@solidboot.com>

Add apollon gpio keys using gpio-keys input
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Update board Apollon with correct file path.
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch merges board specific files from N800 tree.
Nokia has published the files at:

http://repository.maemo.org/pool/maemo3.0/free/source/
kernel-source-rx-34_2.6.18.orig.tar.gz
kernel-source-rx-34_2.6.18-osso29.diff.gz
Signed-off-by: Kai Svahn <kai.svahn@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

- Add etherent gpmc handling
- Remove unused mux setting
- Add MMC switch pin comments
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch syncs H4 board init with linux-omap tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Replace OMAP1610 with OMAP2420.
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

H4 has two peripheral ports, one for "download" and one for OTG.
The one to use is selected through Kconfig.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>