- 13 Oct, 2008 40 commits
-
-
Mark Brown authored
The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Samuel Ortiz <sameo@openedhand.com> Signed-off-by:
Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Provide a new file 'name' in the regulator sysfs class with a human readable name for the regulator for use in applications. Signed-off-by:
-
Mark Brown authored
The WM8400 provides two programmable DCDC step-down (buck) convertors and four low-dropout (LDO) regulators. This driver provides support for runtime managment of these in the standard regulator API. Support for configuration of the suspend and hibernate mode behaviour of the regulators is not yet included. Signed-off-by:
-
Mark Brown authored
The WM8400 is a highly integrated audio CODEC and power management unit optimised for use in mobile multimedia applications. This patch adds core support for the WM8400 to the MFD subsystem. Both I2C and SPI access are supported by the hardware but currently only I2C access is implemented. The code is structured to allow SPI support to be slotted in later. Signed-off-by:
-
Liam Girdwood authored
Additionally added another web resource for voltage regulators. Signed-off-by: -
Mark Brown authored
If the machine constraints mark a regulator as always_on but this was not done by the bootloader then enable the regulator when applying constraints. Signed-off-by:
-
Mark Brown authored
Try to find a human readable name for the regulator we're failing on and print a specific diagnostic when we fail to set the suspend state. Signed-off-by:
-
Mark Brown authored
Since it is now mandatory to supply constraints via init_data on device registration check for that when registering, saving us from oopsing later on. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Liam Girdwood authored
This improves the machine level API in order to configure regulator constraints and consumers as platform data and removes the old string based API that required several calls to set up each regulator. The intention is to create a struct regulator_init_data, populate it's fields with constraints, consumers devices, etc and then register the regulator device from board.c in the standard Linux way. e.g. regulator LDO2 (supplying codec and sim) platform data. /* regulator LDO2 consumer devices */ static struct regulator_consumer_supply ldo2_consumers[] = { { .dev = &platform_audio_device.dev, .supply = "codec_avdd", }, { .dev = &platform_sim_device.dev, .supply = "sim_vcc", } }; /* regulator LDO2 constraints */ static struct regulator_init_data ldo2_data = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), .consumer_supplies = ldo2_consumers, }; /* machine regulator devices with thier consumers and constraints */ static struct platform_device wm8350_regulator_devices[] = { { .name = "wm8350-regulator", .id = WM8350_LDO_2, .dev = { .platform_data = &ldo2_data, }, }, }; Changes in detail:- o Removed all const char* regulator config functions in machine API. o Created new struct regulator_init_data to contain regulator machine configuration constraints and consmuers. o Changed set_supply(), set_machine_constraints(), set_consumer_device_supply() to remove their string identifier parameters. Also made them static and moved functions nearer top of core.c. o Removed no longer used inline func to_rdev() o Added regulator_get_init_drvdata() to retrieve init data. o Added struct device* as parameter to regulator_register(). o Changed my email address. Signed-off-by:Eric Miao <eric.miao@marvell.com> Signed-off-by:
-
Steven Whitehouse authored
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits) Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks Blackfin arch: Fix bogus str_ident check in gpio code Blackfin arch: AD7879 Touchscreen driver Blackfin arch: introducing bfin_addr_dcachable Blackfin arch: fix a typo in comments Blackfin arch: Remove useless head file Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542) Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible Blackfin arch: update anomaly headers to match the latest sheet Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart() Blackfin arch: print out error/warning if you are running on the incorrect CPU type Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts Blackfin arch: update board defconfigs Blackfin arch: Add optional verbose debug Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1) Blackfin arch: ptrace - fix off-by-one check on end of memory regions Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display Blackfin arch: flash memory map and dm9000 resources updating Blackfin arch: early prink code still use uart core console functions to parse and set configure option string ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net/mac80211/rx.c: fix build error acpi: Make ACPI_TOSHIBA depend on INPUT. net/bfin_mac.c MDIO namespace fixes jme: remove unused #include <version.h> netfilter: remove unused #include <version.h> net: Fix off-by-one in skb_dma_map smc911x: Add support for LAN921{5,7,8} chips from SMSC qlge: remove duplicated #include wireless: remove duplicated #include net/au1000_eth.c MDIO namespace fixes net/tc35815.c: fix compilation sky2: Fix WOL regression r8169: NULL pointer dereference on r8169 load
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: chmc: Mark %ver register inline asm with __volatile__ sparc64: Add missing notify_cpu_starting() call. sparc32: fix build errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (33 commits) ALSA: ASoC codec: remove unused #include <version.h> ALSA: ASoC: update email address for Liam Girdwood ALSA: hda: corrected invalid mixer values ALSA: hda: add mixers for analog mixer on 92hd75xx codecs ALSA: ASoC: Add destination and source port for DMA on OMAP1 ALSA: ASoC: Drop device registration from GTA01 lm4857 driver ALSA: ASoC: Fix build of GTA01 audio driver ALSA: ASoC: Add widgets before setting endpoints on GTA01 ALSA: ASoC: Fix inverted input PGA mute bits in WM8903 ALSA: ASoC: OMAP: Set DMA stream name at runtime in McBSP DAI driver ALSA: ASoC: OMAP: Add support for OMAP2430 and OMAP34xx in McBSP DAI driver ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver ALSA: ASoC: Make TLV320AIC26 user-visible ALSA: ASoC - clean up Kconfig for TLV320AIC2 ALSA: ASoC: Make WM8510 microphone input a DAPM mixer ALSA: ASoC: Implement WM8510 bias level control ALSA: ASoC: Remove unused AUDIO_NAME define from codec drivers ALSA: ASoC: tlv320aic3x: Use uniform tlv320aic naming ALSA: ASoC: Add WM8510 SPI support ALSA: ASoC: Add WM8753 SPI support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/procLinus Torvalds authored
* 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: proc: remove kernel.maps_protect proc: remove now unneeded ADDBUF macro [PATCH] proc: show personality via /proc/pid/personality [PATCH] signal, procfs: some lock_task_sighand() users do not need rcu_read_lock() proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig proc: make grab_header() static proc: remove unused get_dma_list() proc: remove dummy vmcore_open() proc: proc_sys_root tweak proc: fix return value of proc_reg_open() in "too late" case Fixed up trivial conflict in removed file arch/sparc/include/asm/dma_32.h
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (24 commits) integrity: special fs magic As pointed out by Jonathan Corbet, the timer must be deleted before ERROR: code indent should use tabs where possible The tpm_dev_release function is only called for platform devices, not pnp Protect tpm_chip_list when transversing it. Renames num_open to is_open, as only one process can open the file at a time. Remove the BKL calls from the TPM driver, which were added in the overall netlabel: Add configuration support for local labeling cipso: Add support for native local labeling and fixup mapping names netlabel: Changes to the NetLabel security attributes to allow LSMs to pass full contexts selinux: Cache NetLabel secattrs in the socket's security struct selinux: Set socket NetLabel based on connection endpoint netlabel: Add functionality to set the security attributes of a packet netlabel: Add network address selectors to the NetLabel/LSM domain mapping netlabel: Add a generic way to create ordered linked lists of network addrs netlabel: Replace protocol/NetLabel linking with refrerence counts smack: Fix missing calls to netlbl_skbuff_err() selinux: Fix missing calls to netlbl_skbuff_err() selinux: Fix a problem in security_netlbl_sid_to_secattr() selinux: Better local/forward check in selinux_ip_postroute() ...
-
git://git.infradead.org/users/dwmw2/random-2.6Linus Torvalds authored
* git://git.infradead.org/users/dwmw2/random-2.6: Fix autoloading of MacBook Pro backlight driver. Automatic MODULE_ALIAS() for DMI match tables. Remove asm/a.out.h files for all architectures without a.out support. Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUT Remove redundant CONFIG_ARCH_SUPPORTS_AOUT S390: Update comments about why we don't use <asm-generic/statfs.h> SPARC: Use <asm-generic/statfs.h> PowerPC: Use <asm-generic/statfs.h> PARISC: Use <asm-generic/statfs.h> x86_64: Use <asm-generic/statfs.h> IA64: Use <asm-generic/statfs.h> ARM: Use <asm-generic/statfs.h> Make <asm-generic/statfs.h> suitable for 64-bit platforms. Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver [MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE. EFS: Don't set f_fsid in statfs().
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
Merges oprofile, timers/hpet, x86/traps, x86/time, and x86/core misc items. * 'x86-core-v4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (132 commits) x86: change early_ioremap to use slots instead of nesting x86: adjust dependencies for CONFIG_X86_CMOV dumpstack: x86: various small unification steps, fix x86: remove additional_cpus x86: remove additional_cpus configurability x86: improve UP kernel when CPU-hotplug and SMP is enabled dumpstack: x86: various small unification steps dumpstack: i386: make kstack= an early boot-param and add oops=panic dumpstack: x86: use log_lvl and unify trace formatting dumptrace: x86: consistently include loglevel, print stack switch dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack dumpstack: x86: make printk_address equal dumpstack: x86: move die_nmi to dumpstack_32.c traps: x86: finalize unification of traps.c traps: x86: make traps_32.c and traps_64.c equal traps: x86: various noop-changes preparing for unification of traps_xx.c traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protection traps: i386: expand clear_mem_error and remove from mach_traps.h traps: x86_64: make io_check_error equal to the one on i386 traps: i386: use preempt_conditional_sti/cli in do_int3 ...
-
Alan Cox authored
Original idea for this from a patch by Rodolfo Giometti which merges various bits of PPS support Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
Drop the kernel lock further and also correct cases where we set rc to an error code, and then return 0 Signed-off-by:
-
Alan Cox authored
get_current_tty now does internal locking and returns a referenced object, thus our use of tty_mutex here can go away. Signed-off-by:
-
Jason Wessel authored
drivers/char/tty_io.c:1413:17: warning: symbol 'buf' shadows an earlier one drivers/char/tty_io.c:1379:20: originally declared here Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
David S. Miller authored
The multiple drivers share the minor space occupied by a particular major number, the actual index within the device name's space is indicated by the tty_driver->name_base + uart_port->line Another usable formula is (uart_driver->minor - MINOR_BASE) + port->line Use those to print the device names properly in such situations in serial_core.c and 8250.c Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alan Cox authored
Closes bug #11408 by checking the card index range for command 0 Fixes the ioctl to return ENOTTY which is correct for unknown ioctls Signed-off-by:
-
Alan Cox authored
Remove/fix some bogus NULL checks, comment some locking etc Signed-off-by:
-
Alan Cox authored
Many tty drivers contain 'can't happen' checks against NULL pointers passed in by the tty layer. These have never been possible to occur. Even more importantly if they ever do occur we want to know as it would be a serious bug. Signed-off-by:
-
Alan Cox authored
Stephen's fixes reminded me that gigaset is still rather broken so fix it up a bit Signed-off-by:
-
Stephen Rothwell authored
Today's linux-next build (x86_64 allmodconfig) failed like this: /drivers/char/tty_ioctl.c: In function 'change_termios': drivers/isdn/capi/capi.c:1234: error: implicit declaration of function 'n_tty_ioctl' drivers/isdn/gigaset/ser-gigaset.c: In function 'gigaset_tty_ioctl': drivers/isdn/gigaset/ser-gigaset.c:648: error: implicit declaration of function 'n_tty_ioctl' Introduced by commit 686b5e4aea05a80e370dc931b7f4a8d03c80da54 ("tty-move-canon-specials"). I added the following patch (which may not be correct). Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Alan Cox authored
Move the set up on ldisc change into the ldisc Move the INQ/OUTQ cases into the driver not in shared ioctl code where it gives bogus answers for other ldisc values Signed-off-by:
-
Alan Cox authored
Copy the simplification from the pty unix98 special case to the generic one. This allows us to kill off driver->termios_locked entirely which is nice. We have to whack bits of the cris driver as it meddles in places it shouldn't providing its own arrays that were never used anyway. Signed-off-by:
-
Alan Cox authored
We need both termios and termios_locked so allocate them as one Signed-off-by:
-
Alan Cox authored
The updating and moving around of the pty code added a bug where both the helper and caller free the main tty struct (the pty driver must free the o_tty pair itself however). Signed-off-by:
-
