dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check all positive increment for promiscuity and allmulti
to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

An oops happens during device unregister.

The following oops happened when I add two tunnels, which
use a same device, and then delete one tunnel.
Obviously deleting tunnel "A" causes device unregister, which
send a notification, and after receiving notification, ipmr do
unregister again for tunnel "B" which also use same device.
That is wrong.
After receiving notification, ipmr only needs to decrease reference
count and don't do duplicated unregister.
Fortunately, IPv6 side doesn't add tunnel in ip6mr, so it's clean.

This patch fixs:
- unregister device oops
- using after dev_put()

Here is the oops:
===
Jul 11 15:39:29 wangchen kernel: ------------[ cut here ]------------
Jul 11 15:39:29 wangchen kernel: kernel BUG at net/core/dev.c:3651!
Jul 11 15:39:29 wangchen kernel: invalid opcode: 0000 [#1] 
Jul 11 15:39:29 wangchen kernel: Modules linked in: ipip tunnel4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipv6 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet binfmt_misc button battery ac loop dm_mod usbhid ff_memless pcmcia firmware_class ohci1394 8139too mii ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ide_cd_mod cdrom snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm i2c_i801 snd_timer snd i2c_core soundcore snd_page_alloc rng_core shpchp ehci_hcd uhci_hcd pci_hotplug intel_agp agpgart usbcore ext3 jbd ata_piix ahci libata dock edd fan thermal processor thermal_sys piix sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table]
Jul 11 15:39:29 wangchen kernel: 
Jul 11 15:39:29 wangchen kernel: Pid: 4102, comm: mroute Not tainted (2.6.26-rc9-default #69)
Jul 11 15:39:29 wangchen kernel: EIP: 0060:[<c024636b>] EFLAGS: 00010202 CPU: 0
Jul 11 15:39:29 wangchen kernel: EIP is at rollback_registered+0x61/0xe3
Jul 11 15:39:29 wangchen kernel: EAX: 00000001 EBX: ecba6000 ECX: 00000000 EDX: ffffffff
Jul 11 15:39:29 wangchen kernel: ESI: 00000001 EDI: ecba6000 EBP: c03de2e8 ESP: ed8e7c3c
Jul 11 15:39:29 wangchen kernel:  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Jul 11 15:39:29 wangchen kernel: Process mroute (pid: 4102, ti=ed8e6000 task=ed41e830 task.ti=ed8e6000)
Jul 11 15:39:29 wangchen kernel: Stack: ecba6000 c024641c 00000028 c0284e1a 00000001 c03de2e8 ecba6000 eecff360 
Jul 11 15:39:29 wangchen kernel:        c0284e4c c03536f4 fffffff8 00000000 c029a819 ecba6000 00000006 ecba6000 
Jul 11 15:39:29 wangchen kernel:        00000000 ecba6000 c03de2c0 c012841b ffffffff 00000000 c024639f ecba6000 
Jul 11 15:39:29 wangchen kernel: Call Trace:
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0284e4c>] ipmr_device_event+0x1e/0x30
Jul 11 15:39:29 wangchen kernel:  [<c029a819>] notifier_call_chain+0x2a/0x47
Jul 11 15:39:29 wangchen kernel:  [<c012841b>] raw_notifier_call_chain+0x9/0xc
Jul 11 15:39:29 wangchen kernel:  [<c024639f>] rollback_registered+0x95/0xe3
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0285eee>] ip_mroute_setsockopt+0x47a/0x801
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c01727c4>] __find_get_block_slow+0xda/0xe4
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c0263501>] ip_setsockopt+0xa9/0x9ee
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea69287>] __ext3_get_inode_loc+0xcf/0x271 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<eea743c7>] __ext3_journal_dirty_metadata+0x13/0x32 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c0116434>] __wake_up+0xf/0x15
Jul 11 15:39:29 wangchen kernel:  [<eea5a424>] journal_stop+0x1bd/0x1c6 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea703a7>] __ext3_journal_stop+0x19/0x34 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c014291e>] get_page_from_freelist+0x94/0x369
Jul 11 15:39:29 wangchen kernel:  [<c01408f2>] filemap_fault+0x1ac/0x2fe
Jul 11 15:39:29 wangchen kernel:  [<c01a605e>] security_sk_alloc+0xd/0xf
Jul 11 15:39:29 wangchen kernel:  [<c023edea>] sk_prot_alloc+0x36/0x78
Jul 11 15:39:29 wangchen kernel:  [<c0240037>] sk_alloc+0x3a/0x40
Jul 11 15:39:29 wangchen kernel:  [<c0276062>] raw_hash_sk+0x46/0x4e
Jul 11 15:39:29 wangchen kernel:  [<c0166aff>] d_alloc+0x1b/0x157
Jul 11 15:39:29 wangchen kernel:  [<c023e4d1>] sock_common_setsockopt+0x12/0x16
Jul 11 15:39:29 wangchen kernel:  [<c023cb1e>] sys_setsockopt+0x6f/0x8e
Jul 11 15:39:29 wangchen kernel:  [<c023e105>] sys_socketcall+0x15c/0x19e
Jul 11 15:39:29 wangchen kernel:  [<c0103611>] sysenter_past_esp+0x6a/0x99
Jul 11 15:39:29 wangchen kernel:  [<c0290000>] unix_poll+0x69/0x78
Jul 11 15:39:29 wangchen kernel:  =======================
Jul 11 15:39:29 wangchen kernel: Code: 83 e0 01 00 00 85 c0 75 1f 53 53 68 12 81 31 c0 e8 3c 30 ed ff ba 3f 0e 00 00 b8 b9 7f 31 c0 83 c4 0c 5b e9 f5 26 ed ff 48 74 04 <0f> 0b eb fe 89 d8 e8 21 ff ff ff 89 d8 e8 62 ea ff ff c7 83 e0 
Jul 11 15:39:29 wangchen kernel: EIP: [<c024636b>] rollback_registered+0x61/0xe3 SS:ESP 0068:ed8e7c3c
Jul 11 15:39:29 wangchen kernel: ---[ end trace c311acf85d169786 ]---
===
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

PS: For unwinding tunnel creating, we let ipip->ioctl() to handle it.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Patrick McHardy pointed it out.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net> 
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for promiscuity to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

In bond_alb and bond_main, we check all positive increment for promiscuity
and allmulti to get error return.
But there are still two problems left.
1. Some code path has no mechanism to signal errors upstream.
2. If there are multi slaves, it's hard to tell which slaves increment
   promisc/allmulti successfully and which failed.
So I left these problems to be FIXME.
Fortunately, the overflow is very rare case.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.  Commit: "netdevice: Fix
promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

In af_packet, we check all positive increment for promiscuity and
allmulti to get error return.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net> 
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:

	net/netfilter/nf_conntrack_proto_tcp.c

Signed-off-by: David S. Miller <davem@davemloft.net>

According to the legacy drivers the LED association status
must be reset after the firmware has been uploaded to the
hardware.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This is a small fix to change the idx type from int to unsigned.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The patch fixes LEDs problem for 3945.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The patch fixes the problem that TXPOWER command is not sent
after we issue a new RXON command which requires a tune. Otherwise
we won't be able to Tx any frames.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch enables active scan on active channels.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch unifies 4965 and 5000 scanning code.

We increases the version number to 1.3.27. Since new uCode
iwlwifi-4965-2.ucode is required for 4965 cards.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch makes correct usage of the LED blink table.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes LED stall. last_blink_time was updated only if LED command
was sent, causing wrong computation of the througput.
Some code cleanup comes with this patch as well
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch asks to allocate the correct amount of sw queues according
to hw ampdu queues number.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes iwl4965_mac_conf_tx. A mutex was taken in atomic context
leading to Oops. This patch removes the mutex and extends the hold
priv->lock. None of the field of QOS is accessed without priv->lock held.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes printk NULL pointer exceptions in rs code.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Guy Cohen <guy.cohen@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch removes post associate work. It wasn't used.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes the RTS / CTS support in iwlwifi. 5000 will send CTS to
self when allowed by spec, 4965 will send RTS or CTS to self according to
mac80211 request.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The patch adds PCI device IDs to iwl_hw_card_ids.
Signed-off-by: Esti Kummer <stkumer@localhost.localdomain>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac802 can handle duplicate packages on its own, so let it do it.
The patch is based on patch from Johannes Berg for iwl4965.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch avoids adding STAs that don't belong to our IBSS
ieee80211_bssid_match matches also bcast address so also APs
were added
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Use directly put_unaligned_leX instead of put_unaligned(cpu_to_leX
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Radiotap is entirely little endian. Found with sparse.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Multiple issues:
 - there are no "default" values needed
 - cw_min/cw_max can be larger than documented
 - restructure to decrease size
 - use get_unaligned_le16
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch makes mac80211 assign proper sequence numbers to
QoS-data frames. It also removes the old sequence number code
because we noticed that only the driver or hardware can assign
sequence numbers to non-QoS-data and especially management
frames in a race-free manner because beacons aren't passed
through mac80211's TX path.

This patch also adds temporary code to the rt2x00 drivers to
not break them completely, that code will have to be reworked
for proper sequence numbers on beacons.

It also moves sequence number assignment down in the TX path
so no sequence numbers are assigned to frames that are dropped.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The /sys/class/net/*/wireless/ direcory is, as far as I know, not
used by anyone. Additionally, the same data is available via wext
ioctls. Hence the sysfs files are pretty much useless. This patch
makes them optional and schedules them for removal.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

According to 802.11-2007, we are doing the wrong thing in the
sequence number checks when receiving frames. This fixes it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu.
This check has been broken by 'mac80211: rx.c use new helpers'.

Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in
RX.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

For RTL8187B it seems we need special values too for ANAPARAM*_OFF
values (and not use RTL8187 ones). The ANAPARAM*_OFF values used are the
stock ones read from the hardware after a cold boot.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ssb.h implements DMA mapping functions, so it should
include dma-mapping.h. This fixes compile failures on certain architectures.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

With the new beacon handling from mac80211 we can
reorganize the beacon handling in rt2x00 as well.
This patch will move the function to the TX handlers,
and move all duplicate code into rt2x00queue.c.

After this change the descriptor helper functions
from rt2x00queue.c no longer need to be exported
outside of rt2x00lib and can be declared static.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>