- 26 Apr, 2010 1 commit
-
-
Guenter Roeck authored
Watchdog configuration register and timer count register were interchanged, causing wrong values to be written into both registers. This caused watchdog triggered resets even if the watchdog was reset in time. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- 25 Apr, 2010 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipv6: Fix inet6_csk_bind_conflict() e100: Fix the TX workqueue race
-
Eric Dumazet authored
Commit fda48a0d (tcp: bind() fix when many ports are bound) introduced a bug on IPV6 part. We should not call ipv6_addr_any(inet6_rcv_saddr(sk2)) but ipv6_addr_any(inet6_rcv_saddr(sk)) because sk2 can be IPV4, while sk is IPV6. Reported-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Issue the discard operation *before* releasing the blocks to be reused ext4: Fix buffer head leaks after calls to ext4_get_inode_loc() ext4: Fix possible lost inode write in no journal mode
-
Alan Cox authored
Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
- 24 Apr, 2010 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] use max load in conservative governor [CPUFREQ] fix a lockdep warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits) gianfar: Fix potential oops during OF address translation fsl_pq_mdio: Fix kernel oops during OF address translation tcp: bind() fix when many ports are bound rdma: potential ERR_PTR dereference rtnetlink: potential ERR_PTR dereference net: ipv6 bind to device issue ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU field less than IPV6_MIN_MTU drivers/net/usb: Add new driver ipheth cxgb3: fix linkup issue X25 fix dead unaccepted sockets KS8851: NULL pointer dereference if list is empty net: 3c574_cs fix stats.tx_bytes counter xfrm6: ensure to use the same dev when building a bundle can: Fix possible NULL pointer dereference in ems_usb.c net: Fix an RCU warning in dev_pick_tx() ipv6: Fix tcp_v6_send_response transport header setting. bridge: add a missing ntohs() 8139too: Fix a typo in the function name. mac80211: pass HT changes to driver when off channel mac80211: remove bogus TX agg state assignment ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Ensure we re-enable devices on resume x86/PCI: parse additional host bridge window resource types PCI: revert broken device warning PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_reset x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions
-
Linus Torvalds authored
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: eeepc-laptop: add missing sparse_keymap_free eeepc-wmi: Build fix asus: don't modify bluetooth/wlan on boot dell-wmi: Fix memory leak eeepc-wmi: add backlight support eeepc-wmi: use a platform device as parent device of all sub-devices eeepc-wmi: add an eeepc_wmi context structure
-
Phillip Lougher authored
The unpack routine fails to handle the decompress_method() returning unrecognised decompressor (compress_name == NULL). This results in the routine looping eventually oopsing on an out of bounds memory access. Note this bug is usually hidden, only triggering on trailing junk after one or more correct compressed blocks. The case of the compressed archive being complete junk is (by accident?) caught by the if (state != Reset) check because state is initialised to Start, but not updated due to the decompressor not having been called. Obviously if the junk is trailing a correctly decompressed buffer, state == Reset from the previous call to the decompressor. Signed-off-by:
Phillip Lougher <phillip@lougher.demon.co.uk> Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
The follow_page() function can potentially return -EFAULT so I added checks for this. Also I silenced an uninitialized variable warning on my version of gcc (version 4.3.2). Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Dmitry Torokhov authored
This is a standalone version of VMware Balloon driver. Ballooning is a technique that allows hypervisor dynamically limit the amount of memory available to the guest (with guest cooperation). In the overcommit scenario, when hypervisor set detects that it needs to shuffle some memory, it instructs the driver to allocate certain number of pages, and the underlying memory gets returned to the hypervisor. Later hypervisor may return memory to the guest by reattaching memory to the pageframes and instructing the driver to "deflate" balloon. We are submitting a standalone driver because KVM maintainer (Avi Kivity) expressed opinion (rightly) that our transport does not fit well into virtqueue paradigm and thus it does not make much sense to integrate with virtio. There were also some concerns whether current ballooning technique is the right thing. If there appears a better framework to achieve this we are prepared to evaluate and switch to using it, but in the meantime we'd like to get this driver upstream. We want to get the driver accepted in distributions so that users do not have to deal with an out-of-tree module and many distributions have "upstream first" requirement. The driver has been shipping for a number of years and users running on VMware platform will have it installed as part of VMware Tools even if it will not come from a distribution, thus there should not be additional risk in pulling the driver into mainline. The driver will only activate if host is VMware so everyone else should not be affected at all. Signed-off-by:
Dmitry Torokhov <dtor@vmware.com> Cc: Avi Kivity <avi@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Anton Blanchard authored
We are seeing a large regression in database performance on recent kernels. The database opens a block device with O_DIRECT|O_SYNC and a number of threads write to different regions of the file at the same time. A simple test case is below. I haven't defined DEVICE since getting it wrong will destroy your data :) On an 3 disk LVM with a 64k chunk size we see about 17MB/sec and only a few threads in IO wait: procs -----io---- -system-- -----cpu------ r b bi bo in cs us sy id wa st 0 3 0 16170 656 2259 0 0 86 14 0 0 2 0 16704 695 2408 0 0 92 8 0 0 2 0 17308 744 2653 0 0 86 14 0 0 2 0 17933 759 2777 0 0 89 10 0 Most threads are blocking in vfs_fsync_range, which has: mutex_lock(&mapping->host->i_mutex); err = fop->fsync(file, dentry, datasync); if (!ret) ret = err; mutex_unlock(&mapping->host->i_mutex); commit 148f948b (vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode) offers some explanation of what is going on: Use these new helpers for syncing from generic VFS functions. This makes O_SYNC writes to block devices acquire i_mutex for syncing. If we really care about this, we can make block_fsync() drop the i_mutex and reacquire it before it returns. Thanks Jan for such a good commit message! As well as dropping i_mutex, Christoph suggests we should remove the call to sync_blockdev(): > sync_blockdev is an overcomplicated alias for filemap_write_and_wait on > the block device inode, which is exactly what we did just before calling > into ->fsync The patch below incorporates both suggestions. With it the testcase improves from 17MB/s to 68M/sec: procs -----io---- -system-- -----cpu------ r b bi bo in cs us sy id wa st 0 7 0 65536 1000 3878 0 0 70 30 0 0 34 0 69632 1016 3921 0 1 46 53 0 0 57 0 69632 1000 3921 0 0 55 45 0 0 53 0 69640 754 4111 0 0 81 19 0 Testcase: #define _GNU_SOURCE #include <stdio.h> #include <pthread.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define NR_THREADS 64 #define BUFSIZE (64 * 1024) #define DEVICE "/dev/mapper/XXXXXX" #define ALIGN(VAL, SIZE) (((VAL)+(SIZE)-1) & ~((SIZE)-1)) static int fd; static void *doit(void *arg) { unsigned long offset = (long)arg; char *b, *buf; b = malloc(BUFSIZE + 1024); buf = (char *)ALIGN((unsigned long)b, 1024); memset(buf, 0, BUFSIZE); while (1) pwrite(fd, buf, BUFSIZE, offset); } int main(int argc, char *argv[]) { int flags = O_RDWR|O_DIRECT; int i; unsigned long offset = 0; if (argc > 1 && !strcmp(argv[1], "O_SYNC")) flags |= O_SYNC; fd = open(DEVICE, flags); if (fd == -1) { perror("open"); exit(1); } for (i = 0; i < NR_THREADS-1; i++) { pthread_t tid; pthread_create(&tid, NULL, doit, (void *)offset); offset += BUFSIZE; } doit((void *)offset); return 0; } Signed-off-by:Anton Blanchard <anton@samba.org> Acked-by:
Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Hans Verkuil authored
Add a missing EXPORT_SYMBOL. I must be the first person that wants to use this function :-) Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Amit Kucheria authored
Fixes the following error: drivers/w1/masters/omap_hdq.c: In function 'hdq_wait_for_flag': drivers/w1/masters/omap_hdq.c:137: error: implicit declaration of function 'schedule_timeout_uninterruptible' drivers/w1/masters/omap_hdq.c: In function 'hdq_write_byte': drivers/w1/masters/omap_hdq.c:177: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) drivers/w1/masters/omap_hdq.c:177: error: (Each undeclared identifier is reported only once drivers/w1/masters/omap_hdq.c:177: error: for each function it appears in.) drivers/w1/masters/omap_hdq.c:177: error: implicit declaration of function 'schedule_timeout' drivers/w1/masters/omap_hdq.c: In function 'hdq_isr': drivers/w1/masters/omap_hdq.c:221: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/w1/masters/omap_hdq.c: In function 'omap_hdq_break': drivers/w1/masters/omap_hdq.c:316: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) Signed-off-by:
Amit Kucheria <amit.kucheria@canonical.com> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Oleg Nesterov authored
If find_mergeable_anon_vma() succeeds but another thread installs ->anon_vma before we take ptl, then allocated == NULL but avc should be freed. Change the code to check avc != NULL to detect this case. Also, a couple of whitespace changes to make the critical section more visible. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
-
David Howells authored
Fix the following RCU warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/request_key.c:116 invoked rcu_dereference_check() without protection! This was caused by doing: [root@andromeda ~]# keyctl newring fred @s 539196288 [root@andromeda ~]# keyctl request2 user a a 539196288 request_key: Required key not available Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
-
Albin Tonnerre authored
This patch fixes 2 issues with the LZO decompressor: - It doesn't handle the case where a block isn't compressed at all. In this case, calling lzo1x_decompress_safe will fail, so we need to just use memcpy() instead (the upstream LZO code does something similar) - Since commit 54291362 ("initramfs: add missing decompressor error check") , the decompressor return code is checked in the init/initramfs.c The LZO decompressor didn't return the expected value, causing the initramfs code to falsely believe a decompression error occured Signed-off-by:
Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by:
bert schulze <spambemyguest@googlemail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Mel Gorman authored
If a futex key happens to be located within a huge page mapped MAP_PRIVATE, get_futex_key() can go into an infinite loop waiting for a page->mapping that will never exist. See https://bugzilla.redhat.com/show_bug.cgi?id=552257 for more details about the problem. This patch makes page->mapping a poisoned value that includes PAGE_MAPPING_ANON mapped MAP_PRIVATE. This is enough for futex to continue but because of PAGE_MAPPING_ANON, the poisoned value is not dereferenced or used by futex. No other part of the VM should be dereferencing the page->mapping of a hugetlbfs page as its page cache is not on the LRU. This patch fixes the problem with the test case described in the bugzilla. [akpm@linux-foundation.org: mel cant spel] Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
Darren Hart <darren@dvhart.com> Cc: <stable@kernel.org> Signed-off-by:
-
Ian Dall authored
Fix regression caused by commit 507e2fba ("w1: w1 temp calculation overflow fix") whereby negative temperatures for the DS18B20 are not converted properly. When the temperature exceeds 32767 milli-degrees the temperature overflows to -32768 millidegrees. These are both well within the -55 - +125 degree range for the sensor. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=12646Signed-of-by:
Ian Dall <ian@beware.dropbear.id.au> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Tested-by:
Karsten Elfenbein <kelfe@gmx.de> Cc: <stable@kernel.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Writing to cgroup.procs is not supported now. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Ben Blum <bblum@andrew.cmu.edu> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Thomas Gerlach authored
Description of patch: --------------------- This is a patch for the EFI framebuffer driver to enable the framebuffer of the NVIDIA 9400M as found in MacBook Pro (MBP) 5,1 and up. The framebuffer of the NVIDIA graphic cards are located at the following addresses in memory: 9400M: 0xC0010000 9600M GT: 0xB0030000 The patch delivered right here only provides the memory location of the framebuffer of the 9400M device. The 9600M GT is not covered. It is assumed that the 9400M is used when powered up the MBP. The information which device is currently powered and in use is stored in the 64 bytes large EFI variable "gpu-power-prefs". More specifically, byte 0x3B indicates whether 9600M GT (0x00) or 9400M (0x01) is online. The PCI bus IDs are the following: 9400M: PCI 03:00:00 9600M GT: PCI 02:00:00 The EFI variables can be easily read-out and manipulated with "rEFIt", an MBP specific bootloader tool. For more information on how handle rEFIt and EFI variables please consult "http://refit.sourceforge.net" and "http://ubuntuforums.org/archive/index.php/t-1076879.html". IMPORTANT NOTE: The information on how to activate the 9400M device given at "ubuntuforums.org" is not correct, since it states gpu-power-prefs[0x3B] = 0x00 -> 9400M (PCI 02:00:00) gpu-power-prefs[0x3B] = 0x01 -> 9600M GT (PCI 03:00:00) Actually, the assignment of the values and the PCI bus IDs are swapped. Suggestions: ------------ To cover framebuffers of both 9400M and 9600M GT, I would suggest to implement a conditional on "gpu-power-prefs". Depending on the value of byte 0x3B, the according framebuffer is selected. However, this requires kernel access to the EFI variables. [akpm@linux-foundation.org: rename optname, per Peter Jones] Signed-off-by:
Thomas Gerlach <t.m.gerlach@freenet.de> Acked-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
-
Takashi Iwai authored
Correct axis-mappings for new HP ProBook laptops. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
-
Paulius Zaleckas authored
We must tell GCC to use even register for variable passed to ldrd instruction. Without this patch GCC 4.2.1 puts this variable to r2/r3 on EABI and r3/r4 on OABI, so force it to r2/r3. This does not change anything when EABI and OABI compilation works OK. Without this patch and with OABI I get: CC drivers/mtd/nand/orion_nand.o /tmp/ccMkwOCs.s: Assembler messages: /tmp/ccMkwOCs.s:63: Error: first destination register must be even -- `ldrd r3,[ip]' make[5]: *** [drivers/mtd/nand/orion_nand.o] Error 1 Signed-off-by:Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by:
Nicolas Pitre <nico@fluxnic.net> Acked-by:
Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by:
-
Changli Gao authored
memset() is called with the wrong address and the kernel panics. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Cc: Patrick McHardy <kaber@trash.net> Acked-by:
David Rientjes <rientjes@google.com> Cc: <stable@kernel.org> Signed-off-by:
-
Andreas Schwab authored
On ppc64 you get this error: $ setarch ppc -R true setarch: ppc: Unrecognized architecture because uname still reports ppc64 as the machine. So mask off the personality flags when checking for PER_LINUX32. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Jeff Mahoney authored
Commit 48b32a35 ("reiserfs: use generic xattr handlers") introduced a problem that causes corruption when extended attributes are replaced with a smaller value. The issue is that the reiserfs_setattr to shrink the xattr file was moved from before the write to after the write. The root issue has always been in the reiserfs xattr code, but was papered over by the fact that in the shrink case, the file would just be expanded again while the xattr was written. The end result is that the last 8 bytes of xattr data are lost. This patch fixes it to use new_size. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=14826Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reported-by:
Christian Kujau <lists@nerdbynature.de> Tested-by:
-
Andrea Arcangeli authored
If a signal is pending (task being killed by sigkill) __mem_cgroup_try_charge will write NULL into &mem, and css_put will oops on null pointer dereference. BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff810fc6cc>] mem_cgroup_prepare_migration+0x7c/0xc0 PGD a5d89067 PUD a5d8a067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/platform/microcode/firmware/microcode/loading CPU 0 Modules linked in: nfs lockd nfs_acl auth_rpcgss sunrpc acpi_cpufreq pcspkr sg [last unloaded: microcode] Pid: 5299, comm: largepages Tainted: G W 2.6.34-rc3 #3 Penryn1600SLI-110dB/To Be Filled By O.E.M. RIP: 0010:[<ffffffff810fc6cc>] [<ffffffff810fc6cc>] mem_cgroup_prepare_migration+0x7c/0xc0 [nishimura@mxp.nes.nec.co.jp: fix merge issues] Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: <stable@kernel.org> Signed-off-by:
-
Jeff Mahoney authored
Commit 677c9b2e ("reiserfs: remove privroot hiding in lookup") removed the magic from the lookup code to hide the .reiserfs_priv directory since it was getting loaded at mount-time instead. The intent was that the entry would be hidden from the user via a poisoned d_compare, but this was faulty. This introduced a security issue where unprivileged users could access and modify extended attributes or ACLs belonging to other users, including root. This patch resolves the issue by properly hiding .reiserfs_priv. This was the intent of the xattr poisoning code, but it appears to have never worked as expected. This is fixed by using d_revalidate instead of d_compare. This patch makes -oexpose_privroot a no-op. I'm fine leaving it this way. The effort involved in working out the corner cases wrt permissions and caching outweigh the benefit of the feature. Signed-off-by:
Edward Shishkin <edward.shishkin@gmail.com> Reported-by:
Matt McCutchen <matt@mattmccutchen.net> Tested-by:
-
- 23 Apr, 2010 11 commits
-
-
Anton Vorontsov authored
gianfar driver may pass NULL pointer to the of_translate_address(), which may lead to a kernel oops. Fix this by using of_iomap(), which is also much simpler and shorter. Signed-off-by:
Anton Vorontsov <avorontsov@mvista.com> Signed-off-by:
-
Anton Vorontsov authored
Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by:
-
Corentin Chary authored
Also remove legacy keymap which was not used since we use sparse_keymap. Signed-off-by:Corentin Chary <corentincj@iksaif.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda: Use STAC_DELL_M6_BOTH quirk for Dell Studio 1558 ALSA: hda: Use LPIB quirk for DG965OT board version AAD63733-203 ALSA: snd-meastro3: Ignore spurious HV interrupts during suspend / resume ALSA: snd-meastro3: Add amp_gpio quirk for Compaq EVO N600C ALSA: hda: Use ALC880_F1734 quirk for Fujitsu Siemens AMILO Xi 1526 ALSA: hda: Use STAC_DELL_M6_BOTH quirk for Dell Studio XPS 1645 ALSA: hda - Fix resume from StR of HP 2510p with docking-station
-
Josef Bacik authored
This cleans up a few of the complaints of __generic_block_fiemap. I've fixed all the typing stuff, used inline functions instead of macros, gotten rid of a couple of variables, and made sure the size and block requests are all block aligned. It also fixes a problem where sometimes FIEMAP_EXTENT_LAST wasn't being set properly. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
Jesse Barnes authored
My PIPE_CONTROL fix (just sent via Eric's tree) was buggy; I was testing a whole set of patches together and missed a conversion to the new HAS_PIPE_CONTROL macro, which will cause breakage on non-Ironlake 965 class chips. Fortunately, the fix is trivial and has been tested. Be sure to use the HAS_PIPE_CONTROL macro in i915_get_gem_seqno, or we'll end up reading the wrong graphics memory, likely causing hangs, crashes, or worse. Reported-by:
Zdenek Kabelac <zdenek.kabelac@gmail.com> Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Tested-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/568600 The OR has verified that the dell-m6 model quirk is necessary for audio to be audible by default on the Dell Studio XPS 1645. This change is necessary for 2.6.32.11 and 2.6.33.2 alike. Reported-by:
Andy Ross <andy@plausible.org> Tested-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/459083 The OR has verified with 2.6.32.11 and the latest alsa-driver stable daily snapshot that position_fix=1 is necessary for the external mic to work and for PulseAudio not to crash constantly. This patch is necessary also for 2.6.32.11 and 2.6.33.2. Reported-by: <imwithid@yahoo.com> Tested-by: <imwithid@yahoo.com> Cc: <stable@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: ensure NCQ error result taskfile is fully initialized before returning it via qc->result_tf. libata: fix docs, RE port and device of libata.force ID separated by point pata_pcmcia/ide-cs: add IDs for transcend and kingston cards libata: fix locking around blk_abort_request()
-
