- 16 Mar, 2010 15 commits
-
-
Vitaliy Gusev authored
route: Fix caught BUG_ON during rt_secret_rebuild_oneshot() Call rt_secret_rebuild can cause BUG_ON(timer_pending(&net->ipv4.rt_secret_timer)) in add_timer as there is not any synchronization for call rt_secret_rebuild_oneshot() for the same net namespace. Also this issue affects to rt_secret_reschedule(). Thus use mod_timer enstead. Signed-off-by:
Vitaliy Gusev <vgusev@openvz.org> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
Jiri Slaby authored
Stanse found that one error path in netpoll_setup dereferences npinfo even though it is NULL. Avoid that by adding new label and go to that instead. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Daniel Borkmann <danborkmann@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: chavey@google.com Acked-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Neil Horman authored
So in the forward porting of various tipc packages, I was constantly getting this lockdep warning everytime I used tipc-config to set a network address for the protocol: [ INFO: possible circular locking dependency detected ] 2.6.33 #1 tipc-config/1326 is trying to acquire lock: (ref_table_lock){+.-...}, at: [<ffffffffa0315148>] tipc_ref_discard+0x53/0xd4 [tipc] but task is already holding lock: (&(&entry->lock)->rlock#2){+.-...}, at: [<ffffffffa03150d5>] tipc_ref_lock+0x43/0x63 [tipc] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&entry->lock)->rlock#2){+.-...}: [<ffffffff8107b508>] __lock_acquire+0xb67/0xd0f [<ffffffff8107b78c>] lock_acquire+0xdc/0x102 [<ffffffff8145471e>] _raw_spin_lock_bh+0x3b/0x6e [<ffffffffa03152b1>] tipc_ref_acquire+0xe8/0x11b [tipc] [<ffffffffa031433f>] tipc_createport_raw+0x78/0x1b9 [tipc] [<ffffffffa031450b>] tipc_createport+0x8b/0x125 [tipc] [<ffffffffa030f221>] tipc_subscr_start+0xce/0x126 [tipc] [<ffffffffa0308fb2>] process_signal_queue+0x47/0x7d [tipc] [<ffffffff81053e0c>] tasklet_action+0x8c/0xf4 [<ffffffff81054bd8>] __do_softirq+0xf8/0x1cd [<ffffffff8100aadc>] call_softirq+0x1c/0x30 [<ffffffff810549f4>] _local_bh_enable_ip+0xb8/0xd7 [<ffffffff81054a21>] local_bh_enable_ip+0xe/0x10 [<ffffffff81454d31>] _raw_spin_unlock_bh+0x34/0x39 [<ffffffffa0308eb8>] spin_unlock_bh.clone.0+0x15/0x17 [tipc] [<ffffffffa0308f47>] tipc_k_signal+0x8d/0xb1 [tipc] [<ffffffffa0308dd9>] tipc_core_start+0x8a/0xad [tipc] [<ffffffffa01b1087>] 0xffffffffa01b1087 [<ffffffff8100207d>] do_one_initcall+0x72/0x18a [<ffffffff810872fb>] sys_init_module+0xd8/0x23a [<ffffffff81009b42>] system_call_fastpath+0x16/0x1b -> #0 (ref_table_lock){+.-...}: [<ffffffff8107b3b2>] __lock_acquire+0xa11/0xd0f [<ffffffff8107b78c>] lock_acquire+0xdc/0x102 [<ffffffff81454836>] _raw_write_lock_bh+0x3b/0x6e [<ffffffffa0315148>] tipc_ref_discard+0x53/0xd4 [tipc] [<ffffffffa03141ee>] tipc_deleteport+0x40/0x119 [tipc] [<ffffffffa0316e35>] release+0xeb/0x137 [tipc] [<ffffffff8139dbf4>] sock_release+0x1f/0x6f [<ffffffff8139dc6b>] sock_close+0x27/0x2b [<ffffffff811116f6>] __fput+0x12a/0x1df [<ffffffff811117c5>] fput+0x1a/0x1c [<ffffffff8110e49b>] filp_close+0x68/0x72 [<ffffffff8110e552>] sys_close+0xad/0xe7 [<ffffffff81009b42>] system_call_fastpath+0x16/0x1b Finally decided I should fix this. Its a straightforward inversion, tipc_ref_acquire takes two locks in this order: ref_table_lock entry->lock while tipc_deleteport takes them in this order: entry->lock (via tipc_port_lock()) ref_table_lock (via tipc_ref_discard()) when the same entry is referenced, we get the above warning. The fix is equally straightforward. Theres no real relation between the entry->lock and the ref_table_lock (they just are needed at the same time), so move the entry->lock aquisition in tipc_ref_acquire down, after we unlock ref_table_lock (this is safe since the ref_table_lock guards changes to the reference table, and we've already claimed a slot there. I've tested the below fix and confirmed that it clears up the lockdep issue Signed-off-by: -
James Chapman authored
This patch fixes UDP socket refcnt bugs in the pppol2tp driver. A bug can cause a kernel stack trace when a tunnel socket is closed. A way to reproduce the issue is to prepare the UDP socket for L2TP (by opening a tunnel pppol2tp socket) and then close it before any L2TP sessions are added to it. The sequence is Create UDP socket Create tunnel pppol2tp socket to prepare UDP socket for L2TP pppol2tp_connect: session_id=0, peer_session_id=0 L2TP SCCRP control frame received (tunnel_id==0) pppol2tp_recv_core: sock_hold() pppol2tp_recv_core: sock_put L2TP ZLB control frame received (tunnel_id=nnn) pppol2tp_recv_core: sock_hold() pppol2tp_recv_core: sock_put Close tunnel management socket pppol2tp_release: session_id=0, peer_session_id=0 Close UDP socket udp_lib_close: BUG The addition of sock_hold() in pppol2tp_connect() solves the problem. For data frames, two sock_put() calls were added to plug a refcnt leak per received data frame. The ref that is grabbed at the top of pppol2tp_recv_core() must always be released, but this wasn't done for accepted data frames or data frames discarded because of bad UDP checksums. This leak meant that any UDP socket that had passed L2TP data traffic (i.e. L2TP data frames, not just L2TP control frames) using pppol2tp would not be released by the kernel. WARNING: at include/net/sock.h:435 udp_lib_unhash+0x117/0x120() Pid: 1086, comm: openl2tpd Not tainted 2.6.33-rc1 #8 Call Trace: [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c101b871>] ? warn_slowpath_common+0x71/0xd0 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c101b8e3>] ? warn_slowpath_null+0x13/0x20 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c11598a7>] ? sk_common_release+0x17/0x90 [<c11a5e33>] ? inet_release+0x33/0x60 [<c11577b0>] ? sock_release+0x10/0x60 [<c115780f>] ? sock_close+0xf/0x30 [<c106e542>] ? __fput+0x52/0x150 [<c106b68e>] ? filp_close+0x3e/0x70 [<c101d2e2>] ? put_files_struct+0x62/0xb0 [<c101eaf7>] ? do_exit+0x5e7/0x650 [<c1081623>] ? mntput_no_expire+0x13/0x70 [<c106b68e>] ? filp_close+0x3e/0x70 [<c101eb8a>] ? do_group_exit+0x2a/0x70 [<c101ebe1>] ? sys_exit_group+0x11/0x20 [<c10029b0>] ? sysenter_do_call+0x12/0x26 Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Steve Glendinning authored
This patch ensures the PHY correctly completes its reset before setting register values. Signed-off-by:
Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by:
-
James Chapman authored
When transmitting L2TP frames, we derive the outgoing interface's UDP checksum hardware assist capabilities from the tunnel dst dev. This can sometimes be NULL, especially when routing protocols are used and routing changes occur. This patch just checks for NULL dst or dev pointers when checking for netdev hardware assist features. BUG: unable to handle kernel NULL pointer dereference at 0000000c IP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/class/net/lo/operstate Modules linked in: pppol2tp pppox ppp_generic slhc ipv6 dummy loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore snd_page_alloc evdev psmouse serio_raw processor button i2c_piix4 i2c_core ati_agp agpgart pcspkr ext3 jbd mbcache sd_mod ide_pci_generic atiixp ide_core ahci ata_generic floppy ehci_hcd ohci_hcd libata e1000e scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted (2.6.32.8 #1) EIP: 0060:[<f89d074c>] EFLAGS: 00010297 CPU: 3 EIP is at pppol2tp_xmit+0x341/0x4da [pppol2tp] EAX: 00000000 EBX: f64d1680 ECX: 000005b9 EDX: 00000000 ESI: f6b91850 EDI: f64d16ac EBP: f6a0c4c0 ESP: f70a9cac DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f70a8000 task=f70a31c0 task.ti=f70a8000) Stack: 000005a9 000005b9 f734c400 f66652c0 f7352e00 f67dc800 00000000 f6b91800 <0> 000005a3 f70ef6c4 f67dcda9 000005a3 f89b192e 00000246 000005a3 f64d1680 <0> f63633e0 f6363320 f64d1680 f65a7320 f65a7364 f65856c0 f64d1680 f679f02f Call Trace: [<f89b192e>] ? ppp_push+0x459/0x50e [ppp_generic] [<f89b217f>] ? ppp_xmit_process+0x3b6/0x430 [ppp_generic] [<f89b2306>] ? ppp_start_xmit+0x10d/0x120 [ppp_generic] [<c11c15cb>] ? dev_hard_start_xmit+0x21f/0x2b2 [<c11d0947>] ? sch_direct_xmit+0x48/0x10e [<c11c19a0>] ? dev_queue_xmit+0x263/0x3a6 [<c11e2a9f>] ? ip_finish_output+0x1f7/0x221 [<c11df682>] ? ip_forward_finish+0x2e/0x30 [<c11de645>] ? ip_rcv_finish+0x295/0x2a9 [<c11c0b19>] ? netif_receive_skb+0x3e9/0x404 [<f814b791>] ? e1000_clean_rx_irq+0x253/0x2fc [e1000e] [<f814cb7a>] ? e1000_clean+0x63/0x1fc [e1000e] [<c1047eff>] ? sched_clock_local+0x15/0x11b [<c11c1095>] ? net_rx_action+0x96/0x195 [<c1035750>] ? __do_softirq+0xaa/0x151 [<c1035828>] ? do_softirq+0x31/0x3c [<c10358fe>] ? irq_exit+0x26/0x58 [<c1004b21>] ? do_IRQ+0x78/0x89 [<c1003729>] ? common_interrupt+0x29/0x30 [<c101ac28>] ? native_safe_halt+0x2/0x3 [<c1008c54>] ? default_idle+0x55/0x75 [<c1009045>] ? c1e_idle+0xd2/0xd5 [<c100233c>] ? cpu_idle+0x46/0x62 Code: 8d 45 08 f0 ff 45 08 89 6b 08 c7 43 68 7e fb 9c f8 8a 45 24 83 e0 0c 3c 04 75 09 80 63 64 f3 e9 b4 00 00 00 8b 43 18 8b 4c 24 04 <8b> 40 0c 8d 79 11 f6 40 44 0e 8a 43 64 75 51 6a 00 8b 4c 24 08 EIP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] SS:ESP 0068:f70a9cac CR2: 000000000000000c Signed-off-by:
-
Steve Glendinning authored
This patch adds a driver for SMSC's LAN7500 family of USB 2.0 to gigabit ethernet adapters. It's loosely based on the smsc95xx driver but the device registers for LAN7500 are completely different. Signed-off-by:
-
Atsushi Nemoto authored
This patch fixes following warning introduced by commit 12bac0d9 ("proc: warn on non-existing proc entries"): WARNING: at /work/mips-linux/make/linux/fs/proc/generic.c:316 __xlate_proc_name+0xe0/0xe8() name 'RBHMA4X00/RTL8019' Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Jiri Slaby authored
Stanse found that one error path (when alloc_skb fails) in netdev_tx omits to unlock hw_priv->hwlock. Fix that. Signed-off-by:
-
Tilman Schmidt authored
Correct a potential array overrun due to an off by one error in the range check on the CAPI CONNECT_REQ CIPValue parameter. Found and reported by Dan Carpenter using smatch. Impact: bugfix Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Michael Braun authored
From: Michael Braun <michael-dev@fami-braun.de> bridge: Fix br_forward crash in promiscuous mode It's a linux-next kernel from 2010-03-12 on an x86 system and it OOPs in the bridge module in br_pass_frame_up (called by br_handle_frame_finish) because brdev cannot be dereferenced (its set to a non-null value). Adding some BUG_ON statements revealed that BR_INPUT_SKB_CB(skb)->brdev == br-dev (as set in br_handle_frame_finish first) only holds until br_forward is called. The next call to br_pass_frame_up then fails. Digging deeper it seems that br_forward either frees the skb or passes it to NF_HOOK which will in turn take care of freeing the skb. The same is holds for br_pass_frame_ip. So it seems as if two independent skb allocations are required. As far as I can see, commit b33084be ("bridge: Avoid unnecessary clone on forward path") removed skb duplication and so likely causes this crash. This crash does not happen on 2.6.33. I've therefore modified br_forward the same way br_flood has been modified so that the skb is not freed if skb0 is going to be used and I can confirm that the attached patch resolves the issue for me. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
Since all callers of br_mdb_ip_get need to check whether the hash table is NULL, this patch moves the check into the function. This fixes the two callers (query/leave handler) that didn't check it. Reported-by:
Michael Braun <michael-dev@fami-braun.de> Signed-off-by:
-
Lars Ellenberg authored
A few subdevice IDs seem to have been dropped when hfc_multi was included upstream, just compare the list at http://www.openvox.cn/viewvc/misdn/trunk/hfc_multi.c?revision=75&view=annotate#l175 with the IDs in drivers/isdn/hardware/mISDN/hfcmulti.c Added PCIe 2 Port card and LED settings (same as PCI) Do not use <linux/pci_ids.h> /KKe Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Karsten Keil <keil@b1-systems.de> Signed-off-by:
-
- 15 Mar, 2010 25 commits
-
-
David S. Miller authored
-
Gerrit Renker authored
dccp: fix panic caused by failed initialisation This fixes a kernel panic reported thanks to Andre Noll: if DCCP is compiled into the kernel and any out of the initialisation steps in net/dccp/proto.c:dccp_init() fail, a subsequent attempt to create a SOCK_DCCP socket will panic, since inet{,6}_create() are not prevented from creating DCCP sockets. This patch fixes the problem by propagating a failure in dccp_init() to dccp_v{4,6}_init_net(), and from there to dccp_v{4,6}_init(), so that the DCCP protocol is not made available if its initialisation fails. Signed-off-by:Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Dan Carpenter authored
We can never reach the return statement. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Tilman Schmidt authored
Calling tty_buffer_request_room() before tty_insert_flip_string() is unnecessary, costs CPU and for big buffers can mess up the multi-page allocation avoidance. Signed-off-by:
-
Tilman Schmidt authored
In RING handling, clear the table of received parameter strings in a loop like everywhere else, instead of by enumeration which had already gotten out of sync. Impact: minor bugfix Signed-off-by:
-
Tilman Schmidt authored
Registering/unregistering the Gigaset CAPI driver when a device is connected/disconnected causes an Oops when disconnecting two Gigaset devices in a row, because the same capi_driver structure gets unregistered twice. Fix by making driver registration/unregistration a separate operation (empty in the ISDN4Linux case) called when the main module is loaded/unloaded. Impact: bugfix Signed-off-by:
-
Christoph Egger authored
CONFIG_HSO_AUTOPM is set by KConfig / set in the Kernel source, makefiles and won't be ever set this way, therefor simply removing the protected code. Signed-off-by:
Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Christoph Egger authored
CONFIG_USE_INTERNAL_TIMER seems to be the remainings of some experiment. It is explicitely #undef-ed as not working, only referenced from one source file and rather aged. Hereby cleaning it from the kernel tree. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Akinobu Mita authored
Replace open-coded loop with for_each_set_bit(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by:
-
Akinobu Mita authored
Replace open-coded loop with for_each_set_bit(). Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Randy Dunlap authored
Fix Makefiles so that Documentation/networking/timestamping/timestamping.c will build when using the CONFIG_BUILD_DOCSRC kconfig option. (timestamping.c does not build currently with its simple Makefile.) Also fix printf format warnings. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by:
-
Julia Lawall authored
The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Ian Munsie authored
Replace references to the '20' magic number found throughout the Eicon ISDN driver for the length of the station_id field in the T30_INFO struct with the T30_MAX_STATION_ID_LENGTH symbolic constant. Signed-off-by:
Ian Munsie <imunsie@au.ibm.com> Cc: Armin Schindler <mac@melware.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by:
-
Ian Munsie authored
When compiling this driver, the compiler throws the following warnings: drivers/isdn/hardware/eicon/message.c:8426: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8427: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8434: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8435: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8436: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8447: warning: array subscript is above array bounds This arises from the particular semantics the driver is using to write to the nlc array (static byte[256]). The array has a length in byte 0 followed by a T30_INFO struct starting at byte 1. The T30_INFO struct has a number of variable length strings after the station_id entry, which cannot be explicitly defined in the struct and the driver accesses them with an array index to station_id beyond the length of station_id. This patch merely changes the semantics that the driver uses to access the entries after the station_id entry to use the original 256 byte nlc array taking the offset and length of the station_id entry to calculate where to write in the array, thereby silencing the warning. Signed-off-by:
-
Roel Kluin authored
The parenthesis was misplaced. Signed-off-by:
-
Stanislaw Gruszka authored
Access to fp->tx_bp_prod is protected by __netif_tx_lock, smp_mb() is not needed for that. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Stanislaw Gruszka authored
Access to fp->tx_bd_prod is protected by __netif_tx_lock, so we do not need any barrier for that. Update of fp->tx_bd_cons in bnx2x_tx_int() is not protected by lock, but barrier() nor smb_mb() in bnx2x_tx_avail() not guarantee we will see values that is written on other cpu. Ordering issues between netif_tx_stop_queue(), netif_tx_queue_stopped(), fp->tx_bd_cons = bd_cons and bnx2x_tx_avail() are already handled by smp_mb() in bnx2x_tx_int() and bnx2x_start_xmit(). Signed-off-by:
-
Stanislaw Gruszka authored
Since we want to keep ordering of write to fp->bd_tx_cons and netif_tx_queue_stopped(txq), what is read of txq->state, we have to use general memory barrier. Signed-off-by:
-
Ajit Khaparde authored
The request to create an mccq was being dispatched without doing a byte swap of num_pages. This byte swap is necessary for Big Endian systems like PPC. Not having this fix leads mccq create to fail on BE ASICs running newer version of firmware, thereby causing driver initialization failure. Signed-off-by:
Ajit Khaparde <ajitk@serverengines.com> Signed-off-by:
-
chaithrika@ti.com authored
Migrate from the legacy PM hooks to use dev_pm_ops structure. Signed-off-by:
Chaithrika U S <chaithrika@ti.com> Acked-by:
Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by:
-
Sekhar Nori authored
The davinci emac driver uses some ARM specific DMA APIs for cache coherency which have been removed from kernel with the 2.6.34 merge. Modify the driver to use the dma_{map, unmap}_single() APIs defined in dma-mapping.h Without this fix, the driver fails to compile on Linus's tree. Tested on DM365 and OMAP-L138 EVMs. Signed-off-by:Sekhar Nori <nsekhar@ti.com> Acked-by:
-
David S. Miller authored
When the PCI pool changes were added to fix resume failures: commit 98468efd e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failu and commit 70abc8cb e100: Fix broken cbs accounting due to missing memset. This introduced a problem that can happen if the TX ring size is increased. We need to size the PCI pool using cbs->max instead of the default cbs->count value. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) ACPI: processor: push file static MADT pointer into internal map_madt_entry() ACPI: processor: refactor internal map_lsapic_id() ACPI: processor: refactor internal map_x2apic_id() ACPI: processor: refactor internal map_lapic_id() ACPI: processor: driver doesn't need to evaluate _PDC ACPI: processor: remove early _PDC optin quirks ACPI: processor: add internal processor_physically_present() ACPI: processor: move acpi_get_cpuid into processor_core.c ACPI: processor: export acpi_get_cpuid() ACPI: processor: mv processor_pdc.c processor_core.c ACPI: processor: mv processor_core.c processor_driver.c ACPI: plan to delete "acpi=ht" boot option ACPI: remove "acpi=ht" DMI blacklist PNPACPI: add bus number support PNPACPI: add window support resource: add window support resource: add bus number support resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type acpiphp: Execute ACPI _REG method for hotadded devices ACPI video: Be more liberal in validating _BQC behaviour ...
-
Wolfram Sang authored
Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute.") introduced this requirement. First, at25 was fixed manually. Then, other occurences were found with coccinelle and the following semantic patch. Results were reviewed and fixed up: @ init @ identifier struct_name, bin; @@ struct struct_name { ... struct bin_attribute bin; ... }; @ main extends init @ expression E; statement S; identifier name, err; @@ ( struct struct_name *name; | - struct struct_name *name = NULL; + struct struct_name *name; ) ... ( sysfs_bin_attr_init(&name->bin); | + sysfs_bin_attr_init(&name->bin); if (sysfs_create_bin_file(E, &name->bin)) S | + sysfs_bin_attr_init(&name->bin); err = sysfs_create_bin_file(E, &name->bin); ) Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Len Brown authored
Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
-
