- 29 Sep, 2006 2 commits
-
-
Chuck Short authored
Fix memory leak. Coverity id# 653 patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=a1f34cb68b16807ed9d5ebb0f6a6ec5ff8a5fc78Signed-off-by:
Chuck Short <zulcss@gmail.com> Signed-off-by:
Ben Collins <bcollins@ubuntu.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Olive Leite authored
A while ago Ingo patched tcp_v4_rcv on net/ipv4/tcp_ipv4.c to use bh_lock_sock_nested and silence a lock validator warning. This fixed it for IPv4, but recently I saw a report of the same warning on IPv6. Signed-off-by:
-
- 28 Sep, 2006 38 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/hwmon-2.6: (39 commits) hwmon: Remove Yuan Mu's address hwmon: Fix unchecked return status, SMSC chips hwmon: Fix unchecked return status, batch 6 w83792d: Fix unchecked return status w83l785ts: Fix unchecked return status w83781d: Fix unchecked return status vt8231: Fix unchecked return status Fix unchecked return status, batch 5 hwmon: Fix unchecked return status, batch 4 hwmon: Fix unchecked return status, batch 3 hwmon: Fix unchecked return status, batch 2 w83627ehf: Fix unchecked return status pc87360: Check for error on sysfs files creation pc87360: Delete sysfs files on device deletion pc87360: Move some code around hwmon: Fix unchecked return status, batch 1 vt1211: Document module parameters vt1211: Add documentation hwmon: New driver for the VIA VT1211 w83791d: Documentation update ...
-
Alan Stern authored
Strictly speaking, the Valid bit in SCSI sense data is supposed to be set only when the Information field contains a valid number. This patch (as793) turns off the Valid bit when the Information field hasn't been set. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as791b) fixes things up to avoid compiler warnings or errors when CONFIG_USB_SUSPEND or CONFIG_PM isn't set. Signed-off-by:
-
Alan Stern authored
This patch (as790b) adds "autostop" support to ohci-hcd: the driver will automatically stop the host controller when no devices have been connected for at least one second. This feature is useful when the USB autosuspend facility isn't available, such as when CONFIG_USB_SUSPEND hasn't been set. Signed-off-by:
-
Alan Stern authored
The autosuspend technique used by ohci-hcd doesn't mesh well with the newer USB core autosuspend code. This patch (as789) removes ohci-hcd's autosuspend support. Now the driver will be usable, but it won't automatically go into a low-power state when no devices are connected. That's for a later patch. Signed-off-by:
-
Alan Stern authored
Originally I didn't think any host controller driver would ever use interrupts and polling at the same time, but it turns out ohci-hcd wants to do exactly that. This patch (as788) makes it possible. Signed-off-by:
-
Alan Stern authored
This patch (as792) fixes "ignoring return value" warnings in file_storage.c. Signed-off-by:
-
Alan Stern authored
This patch (as758) fixes the "warn-unused-result" messages in dummy-hcd. Signed-off-by:
-
Alan Stern authored
This patch (as787) creates a new workqueue thread to handle delayed USB autosuspend requests. Previously the code used keventd. However it turns out that the hub driver's suspend routine calls flush_scheduled_work(), making it a poor candidate for running in keventd (the call immediately deadlocks). The solution is to use a new thread instead of keventd. Signed-off-by:
-
Jan Mate authored
USB Storage: this patch adds support for Sony Ericsson P990i Signed-off-by:
Jan Mate <mate@fiit.stuba.sk> Signed-off-by:
-
Henrik Kretzschmar authored
Converts obsolete typedef'd Scsi_Cmnd into struct scsi_cmnd. Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
Henrik Kretzschmar authored
Fixes kerneldoc errors on usb/core/driver.c, which occured in 2.6.18-rc6-mm2 gregkh-usb-usbcore-add-autosuspend-autoresume-infrastructure.patch Signed-off-by:
-
Raghavendra Biligiri authored
During Installation the host tries to enumerate the keyboard/mouse dongle for the Raritan KVM.At this time timeouts have been observed Adding the Raritan KVM USB dongle to the blacklist fixes this issue. Signed-off-by:
Raghavendra Biligiri <Raghavendra_Biligiri@Dell.com> Signed-off-by:
-
David Hollis authored
Add alternate device IDs for Dlink DUB-E100 Rev B1 Signed-off-by:
David Hollis <dhollis@davehollis.com> Signed-off-by:
-
Peter Zijlstra authored
========================================================= [ INFO: possible irq lock inversion dependency detected ]
-
Alan Cox authored
We want to avoid legacy APIs like pci_find_slot(). Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Mikael Pettersson authored
Implementations assume the buffer is at least 4 byte aligned. Signed-off-by:
-
Justin Carlson authored
We have a couple of these USB-Serial converters around; they're slightly different from the 2104 models in that they can handle 500Kb/sec over RS422. The existing ftdi driver seems to work just fine if we add in the appropriate IDs. Patch is against 2.6.17.6, but should apply cleanly to pretty much anything recent. From: Justin Carlson <justinca@qatar.cmu.edu> Signed-off-by: -
Sean Young authored
New phidget interface kits (type 8/8/8) reset their outputs if they haven't received a set report for 2 seconds. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Matthias Urlichs authored
Add yet another device ID to the ipaq USB-serial driver. Signed-Off-By:
Matthias Urlichs <matthias@urlichs.de> Cc: Ganesh Varadarajan <ganesh@veritas.com> Signed-off-by:
-
Ian Abbott authored
This patch adds support for three OpenPort ECU data cables from Tactrix Inc. to the ftdi_sio driver's device ID table. One of the PIDs was supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list. The other two were added by myself after examining the Windows driver software. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Petko Manolov authored
Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Alan Stern authored
This patch (as794) adds an unusual_devs entry for the Nokia E60. Signed-off-by:
-
Wesley PA4WDH authored
Signed-off-by: -
Oliver Neukum authored
this adds a new id to the kaweth driver. Please apply. Signed-Off-By:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
-
Jean Delvare authored
hwmon: Remove Yuan Mu's address Yuan Mu no longer works at Winbond. I wish to publicly thank Yuan for his help with Winbond hardware monitoring chips support during the past 10 months. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
hwmon: Fix unchecked return status, SMSC chips Fix up 2 more hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by:
-
Jean Delvare authored
hwmon: Fix unchecked return status, batch 6 Fix up 5 more hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by:
-
Rudolf Marek authored
w83792d: Fix unchecked return status Fix the w83792d driver. Add error checking to device_create_file and also care to destroy the files upon exit. Signed-off-by:
Rudolf Marek <r.marek@assembler.cz> Signed-off-by:
-
Rudolf Marek authored
w83l785ts: Fix unchecked return status Fix the w83l785ts driver. Add error checking to device_create_file and also care to destroy the files upon exit. Signed-off-by:
-
Jim Cromie authored
w83781d: Fix unchecked return status Add 2 attr-file groups (for base and model-specific attrs respectively), create the base group with single call to sysfs_create_group, check the return code on individual calls to device_create_file for each of the model-specific attr-files. Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Roger Lucas authored
vt8231: Fix unchecked return status Check the return status from device_create_file() and also use the newer and cleaner sysfs creation functions. Signed-off-by:
Roger Lucas <roger@planbit.co.uk> Signed-off-by:
-
Jean Delvare authored
hwmon: Fix unchecked return status, batch 5 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by:
-
Jean Delvare authored
hwmon: Fix unchecked return status, batch 4 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Note: f71805f actually checked the status from device_create_file already. However it did not remove the files on device destruction. It was also an opportunity to use sysfs_create/remove_group instead of hand-made loops. This makes the changes much more important but I think the result is worth it. Signed-off-by:
-
Mark M. Hoffman authored
hwmon: Fix unchecked return status, batch 3 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by:
Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by:
-
Mark M. Hoffman authored
hwmon: Fix unchecked return status, batch 2 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by:
-
David Hubbard authored
w83627ehf: Fix unchecked return status Fix: check return value from device_create_file() Fix: call device_remove_file() on error and module unload Fix: call hwmon_device_register() after device_create_file() to eliminate race Signed-off-by:
David Hubbard <david.c.hubbard@gmail.com> Signed-off-by:
-
Jim Cromie authored
pc87360: Check for error on sysfs files creation Use sysfs_create_group() for 2 sensor-types which are chip-model invariant, i.e. all-or-nothing attribute groups. Other 2 groups vary too much due to configuration, etc, so we keep the loops of device_create_file(), but now check their returns. Signed-off-by:
-
