- 02 Feb, 2008 13 commits
-
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com>
-
Michael Hennerich authored
- Buttons on the BF533-STAMP board are not inverted - Fix spurious GPIO Interrupt caused during set irq_type for edge triggered interrupts Signed-off-by:
-
Tilman Schmidt authored
[Blackfin] arch: remove duplicated definitions of the line discipline numbers N_* in asm-blackfin/termios.h The definitions of the line discipline numbers N_* have been moved from asm-*/termios.h to linux/tty.h, but the Blackfin architecture has somehow evaded that move. Bring it in line with the others. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Mike Frysinger authored
[Blackfin] arch: fix building with mtd uclinux by putting the mtd_phys option into the function it actually gets used in Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Move the init sections to the end of memory so that after they are free, run time memory is all continugous - this should help decrease memory fragementation. When doing this, we also pack some of the other sections a little closer together, to make sure we don't waste memory. To make this happen, we need to rename the .data.init_task section to .init_task.data, so it doesn't get picked up by the linker script glob. Signed-off-by:
-
Mike Frysinger authored
To save/restore the trace buffer control so that if we take an exception after turning off the trace buffer at a higher level we dont inadvertently turn the trace buffer back on Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Michael Hennerich authored
This fixes a bug (zero pointer access) only seen on BF561, during USB Mass Storage/SCSI Host initialization. It appears to be related to registering a none existing CPU Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
- 08 Feb, 2008 4 commits
-
-
Mike Frysinger authored
[Blackfin] arch: add support for cmdline partitioning to the BF533-STAMP flash map driver and enable it as a module by default Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
Michael Hennerich authored
- Add support for irq_wake on system and gpio interrupts - Remove outdated kernel options - Add option to select default PM mode - Fix various places where SIC_IWRx was only handled partially Signed-off-by:
-
Michael Hennerich authored
Merge single core ints-priority-sc.c and dual core ints-priority-dc.c into one common code ints-priority.c Signed-off-by:
-
Yi Li authored
[Blackfin] arch: add "memmap=nn[KMG]@ss[KMG]" and "memmap=nn[KMG]$ss[KMG]" options to blackfin, based on arch/i386/kernel/e820.c Signed-off-by:
Yi Li <yi.li@analog.com> Signed-off-by:
-
- 02 Feb, 2008 2 commits
-
-
Mike Frysinger authored
Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
- 08 Feb, 2008 21 commits
-
-
git://www.jni.nu/crisLinus Torvalds authored
* 'cris' of git://www.jni.nu/cris: (158 commits) CRIS v32: Remove hwregs/timer_defs.h, it is now architecture specific. CRIS v32: Change drivers/i2c.c locking. CRIS v32: Rewrite ARTPEC-3 gpio driver to avoid volatiles and general cleanup. CRIS: Add new timerfd syscall entries. MAINTAINERS: Add my information for the CRIS port. CRIS v32: Correct spelling of bandwidth in function name. CRIS v32: Clean up nandflash.c for ARTPEC-3 and ETRAX FS. CRIS v10: Cleanup of drivers/gpio.c CRIS v10: drivers/net/cris/eth_v10.c rename LED defines to CRIS_LED to avoid name clash. CRIS: Make io_pwm_set_period members unsigned in etraxgpio.h CRIS: Move ETRAX_AXISFLASHMAP to common Kconfig file. CRIS: Drop regs parameter from call to profile_tick in kernel/time.c CRIS v32: Fix minor formatting issue in mach-a3/io.c CRIS v32: Initialize GIO even if we're rambooting in kernel/head.S CRIS v32: Remove kernel/arbiter.c, it now exists in machine dependent directory. CRIS v32: Minor changes to avoid errors in asm-cris/arch-v32/hwregs/reg_rdwr.h CRIS v32: arch-v32/hwregs/intr_vect_defs.h moved to machine dependent directory. CRIS v32: Correct offset for TASK_pid in asm-cris/arch-v32/offset.h CRIS v32: Move register map header to machine dependent directory. CRIS v32: Let compiler know that memory is clobbered after a break op. ...
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Enhanced partition statistics: documentation update Enhanced partition statistics: remove old partition statistics Enhanced partition statistics: procfs Enhanced partition statistics: sysfs Enhanced partition statistics: aoe fix Enhanced partition statistics: update partition statitics Enhanced partition statistics: core statistics block: fixup rq_init() a bit Manually fixed conflict in drivers/block/aoe/aoecmd.c due to statistics support.
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: add __init and __exit marks to init and exit functions dlm: eliminate astparam type casting dlm: proper types for asts and basts dlm: dlm/user.c input validation fixes dlm: fix dlm_dir_lookup() handling of too long names dlm: fix overflows when copying from ->m_extra to lvb dlm: make find_rsb() fail gracefully when namelen is too large dlm: receive_rcom_lock_args() overflow check dlm: verify that places expecting rcom_lock have packet long enough dlm: validate data in dlm_recover_directory() dlm: missing length check in check_config() dlm: use proper type for ->ls_recover_buf dlm: do not byteswap rcom_config dlm: do not byteswap rcom_lock dlm: dlm_process_incoming_buffer() fixes dlm: use proper C for dlm/requestqueue stuff (and fix alignment bug)
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Add arch-specific walk_memory_remove() for 64-bit powerpc [POWERPC] Enable hotplug memory remove for 64-bit powerpc [POWERPC] Add remove_memory() for 64-bit powerpc [POWERPC] Make cell IOMMU fixed mapping printk more useful [POWERPC] Fix potential cell IOMMU bug when switching back to default DMA ops [POWERPC] Don't enable cell IOMMU fixed mapping if there are no dma-ranges [POWERPC] Fix cell IOMMU null pointer explosion on old firmwares [POWERPC] spufs: Fix timing dependent false return from spufs_run_spu [POWERPC] spufs: No need to have a runnable SPU for libassist update [POWERPC] spufs: Update SPU_Status[CISHP] in backing runcntl write [POWERPC] spufs: Fix state_mutex leaks [POWERPC] Disable G5 NAP mode during SMU commands on U3
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Make use of the new fs/compat_binfmt_elf.c [SPARC64]: Make use of compat_sys_ptrace() Manually fixed trivial delete/modift conflict in arch/sparc64/kernel/binfmt_elf32.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) [IPSEC] flow: reorder "struct flow_cache_entry" and remove SLAB_HWCACHE_ALIGN [DECNET] ROUTE: remove unecessary alignment [IPSEC]: Add support for aes-ctr. [ISDN]: fix section mismatch warning in enpci_card_msg [TIPC]: declare proto_ops structures as 'const'. [TIPC]: Kill unused static inline (x5) [TC]: oops in em_meta [IPV6] Minor cleanup: remove unused definitions in net/ip6_fib.h [IPV6] Minor clenup: remove two unused definitions in net/ip6_route.h [AF_IUCV]: defensive programming of iucv_callback_txdone [AF_IUCV]: broken send_skb_q results in endless loop [IUCV]: wrong irq-disabling locking at module load time [CAN]: Minor clean-ups [CAN]: Move proto_{,un}register() out of spin-locked region [CAN]: Clean up module auto loading [IPSEC] flow: Remove an unnecessary ____cacheline_aligned [IPV4]: route: fix crash ip_route_input [NETFILTER]: xt_iprange: add missing #include [NETFILTER]: xt_iprange: fix typo in address family [NETFILTER]: nf_conntrack: fix ct_extend ->move operation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acer-wmi, tc1100-wmi: select ACPI_WMI ACPI: WMI: Improve Kconfig description ACPI: DMI: add Panasonic CF-52 and Thinpad X61 ACPI: thermal: syntax, spelling, kernel-doc intel_menlo: build on X86 only ACPI: build WMI on X86 only ACPI: cpufreq: Print _PPC changes via cpufreq debug layer ACPI: add newline to printk
-
Jens Axboe authored
vmsplice_to_user() must always check the user pointer and length with access_ok() before copying. Likewise, for the slow path of copy_from_user_mmap_sem() we need to check that we may read from the user region. Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Cc: Wojciech Purczynski <cliph@research.coseinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
Turn off quotas before filesystem is remounted read only. Otherwise quota will try to write to read-only filesystem which does no good... We could also just refuse to remount ro when quota is enabled but turning quota off is consistent with what we do on umount. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Neil Brown authored
Some devices - notably dm and md - can change their behaviour in response to BIO_RW_BARRIER requests. They might start out accepting such requests but on reconfiguration, they find out that they cannot any more. ext3 (and other filesystems) deal with this by always testing if BIO_RW_BARRIER requests fail with EOPNOTSUPP, and retrying the write requests without the barrier (probably after waiting for any pending writes to complete). However there is a bug in the handling for this for ext3. When ext3 (jbd actually) decides to submit a BIO_RW_BARRIER request, it sets the buffer_ordered flag on the buffer head. If the request completes successfully, the flag STAYS SET. Other code might then write the same buffer_head after the device has been reconfigured to not accept barriers. This write will then fail, but the "other code" is not ready to handle EOPNOTSUPP errors and the error will be treated as fatal. This can be seen without having to reconfigure a device at exactly the wrong time by putting: if (buffer_ordered(bh)) printk("OH DEAR, and ordered buffer\n"); in the while loop in "commit phase 5" of journal_commit_transaction. If it ever prints the "OH DEAR ..." message (as it does sometimes for me), then that request could (in different circumstances) have failed with EOPNOTSUPP, but that isn't tested for. My proposed fix is to clear the buffer_ordered flag after it has been used, as in the following patch. Signed-off-by:Neil Brown <neilb@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Eric Sandeen authored
do_mount() uses a whopping 616 bytes of stack on x86_64 in 2.6.24-mm1, largely thanks to gcc inlining the various helper functions. noinlining these can slim it down a lot; on my box this patch gets it down to 168, which is mostly the struct nameidata nd; left on the stack. These functions are called only as do_mount() helpers; none of them should be in any path that would see a performance benefit from inlining... Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by:
-
Jeff Dike authored
[ Spotted by Miklos ] Fix a memory leak in init_new_context. The struct page ** buffer allocated for install_special_mapping was never recorded, and thus leaked when the mm_struct was freed. Fix it by saving the pointer in mm_context_t and freeing it in arch_exit_mmap. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Jeff Dike authored
%fs needs to be copied from parent to child during fork. Tidied up some whitespace while I was here. Signed-off-by:
-
Jim Meyering authored
* arch/um/os-Linux/mem.c (make_tempfile): Don't deref NULL upon failed malloc. * arch/um/os-Linux/mem.c (make_tempfile): Handle NULL tempdir. Don't let a long tempdir (e.g., via TMPDIR) provoke heap corruption. [ jdike - formatting cleanups, deleted obsolete comment ] Signed-off-by:
Jim Meyering <meyering@redhat.com> Signed-off-by:
-
Jeff Dike authored
Style changes under arch/um/os-Linux: include trimming CodingStyle fixes some printks needed severity indicators make_tempfile turns out not to be used outside of mem.c, so it is now static. Its declaration in tempfile.h is no longer needed, and tempfile.h itself is no longer needed. create_tmp_file was also made static. checkpatch moans about an EXPORT_SYMBOL in user_syms.c which is part of a macro definition - this is copying a bit of kernel infrastructure into the libc side of UML because the kernel headers can't be included there. Signed-off-by:
-
Jeff Dike authored
Calculate TASK_SIZE at run-time by figuring out the host's VMSPLIT - this is needed on i386 if UML is to run on hosts with varying VMSPLITs without recompilation. TASK_SIZE is now defined in terms of a variable, task_size. This gets rid of an include of pgtable.h from processor.h, which can cause include loops. On i386, task_size is calculated early in boot by probing the address space in a binary search to figure out where the boundary between usable and non-usable memory is. This tries to make sure that a page that is considered to be in userspace is, or can be made, read-write. I'm concerned about a system-global VDSO page in kernel memory being hit and considered to be a userspace page. On x86_64, task_size is just the old value of CONFIG_TOP_ADDR. A bunch of config variable are gone now. CONFIG_TOP_ADDR is directly replaced by TASK_SIZE. NEST_LEVEL is gone since the relocation of the stubs makes it irrelevant. All the HOST_VMSPLIT stuff is gone. All references to these in arch/um/Makefile are also gone. I noticed and fixed a missing extern in os.h when adding os_get_task_size. Note: This has been revised to fix the 32-bit UML on 64-bit host bug that Miklos ran into. Signed-off-by:
-
Martin Schwidefsky authored
Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Andy Whitcroft authored
This version brings the remainder of the queued fixes. A number of fixes for items missed reported by Andrew Morton and others. Also a handful of new checks and fixes for false positives. Of note: - new warning associated with --file to try and avoid cleanup only patches, - corrected handling of completly empty files, - corrected report handling with multiple files, - handling of possible types in the face of multiple declarations, - detection of unnessary braces on complex if statements (where present), and - all new comment spacing handling. Andi Kleen (1): Introduce a warning when --file mode is used Andy Whitcroft (14): Version: 0.14 clean up some space violations in checkpatch.pl a completly empty file should not provoke a whinge reset report lines buffers between files unary ++/-- may abutt close braces __typeof__ is also unary comments: revamp comment handling add --summary-file option adding filename to summary line trailing backslashes are not trailing statements handle operators passed as parameters such as to ASSERTCMP possible types -- enhance debugging check for boolean operations with constants possible types: handle multiple declarations detect and report if statements where all branches are single statements Arjan van de Ven (1): quiet option should not print the summary on no errors Bartlomiej Zolnierkiewicz (1): warn about using __FUNCTION__ Timur Tabi (1): loosen spacing checks for __asm__ Signed-off-by:Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Ralf Baechle authored
Use set_irq_noprobe() to mark all MIPS interrupts as non-probe. Override that default for i8259 interrupts. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Acked-and-tested-by:
Rob Landley <rob@landley.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ralf Baechle authored
Probing non-ISA interrupts using the handle_percpu_irq as their handle_irq method may crash the system because handle_percpu_irq does not check IRQ_WAITING. This for example hits the MIPS Qemu configuration. This patch provides two helper functions set_irq_noprobe and set_irq_probe to set rsp. clear the IRQ_NOPROBE flag. The only current caller is MIPS code but this really belongs into generic code. As an aside, interrupt probing these days has become a mostly obsolete if not dangerous art. I think Linux interrupts should be changed to default to non-probing but that's subject of this patch. Signed-off-by:
-
Denis Cheng authored
There is an outdated comment in serial_core.c also fixed. Signed-off-by:
Denis Cheng <crquan@gmail.com> Signed-off-by:
-
