- 30 Mar, 2009 40 commits
-
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Andy Walls authored
The cx18 private packet insertion code only expects to operate on an MPEG PS when inserting private packets of sliced VBI data. This patch keeps the cx18 driver from corrupting the MPEG TS or other non-PS stream types, in case the user enables sliced VBI insertion for these MPEG stream types. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
Based on a documentation clarification from Conexant, fix the register code used for sliced VBI VPS service. Signed-off-by:
-
Andy Walls authored
This change only affects comments. Signed-off-by:
-
Andy Walls authored
My s-parse builds never griped about be32_to_cpu() casting to __be32, but Hans' builds did. This change explictly declares the pointer into the VBI buffer header as __be32, which is the correct thing to do as the data is always big endian when we go to fetch it. Hopefully this will quiet s-parse warnings. Also corrected a misplaced parenthesis logic error in checking for the VBI header magic number. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
Fix a scaling check that was failing, due to a magic number I missed fixing during previous slice VBI changes. Now $ v4l2-ctl -v width=480,height=480,pixelformat=MPEG yields proper visual results again. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Trent Piepho authored
It was a struct file *, but all that function wants is the struct zoran_fh from the file's private data. Since every caller already has this, just pass the zoran_fh instead. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Randy Dunlap authored
Fix dvb frontend debug variable to be static, to avoid linker errors: drivers/built-in.o:(.data+0xf4b0): multiple definition of `debug' arch/x86/kernel/built-in.o:(.kprobes.text+0x90): first defined here ld: Warning: size of symbol `debug' changed from 85 in arch/x86/kernel/built-in.o to 4 in drivers/built-in.o It would also be Good if arch/x86/kernel/entry_32.S didn't have a non-static 'debug' symbol. OTOH, it helps catch things like this one. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Oliver Endriss authored
saa7146: Clean-up i2c error handling Simplify i2c error handling and fix incorrect handling of address errors in poll mode. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Some dvb frontends are required on some boards, but those dependencies were missed. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
There are still more places where DVB_FE_CUSTOMIZE is used, instead of DVB_FE_CUSTOMISE. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of asking a lot of questions for the poor users, let's just hide the frontend customise menu, if the user doesn't want to customise. Signed-off-by: -
Mauro Carvalho Chehab authored
The name of the option is DVB_FE_CUSTOMISE. However, on a few places, a wrong name were used, due to a typo (DVB_FE_CUSTOMIZE). Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Vitaly Wool authored
Compro VideoMate uses an external audio DSP chip, controlled via tvaudio module (tda9874a). This patch improves em28xx infrastructure to support an external audio processor and fixes the Compro VideoMate entry to work with it. Signed-off-by:
Vitaly Wool <vital@embeddedalley.com> Signed-off-by:
-
Randy Dunlap authored
dm1105 uses the ir_*() functions, so it needs to select VIDEO_IR to avoid build errors: dm1105.c:(.text+0x26b7ac): undefined reference to `ir_input_keydown' dm1105.c:(.text+0x26b7bc): undefined reference to `ir_input_nokey' (.devinit.text+0x29982): undefined reference to `ir_codes_dm1105_nec' (.devinit.text+0x2998a): undefined reference to `ir_input_init' Signed-off-by:
-
Adam Baker authored
Add support for the alternate resolutions offered by SQ-905 based cameras. As well as 320x240 all cameras can do 160x120 and some can do 640x480. Signed-off-by:
Adam Baker <linux@baker-net.org.uk> Signed-off-by:
Theodore Kilgore <kilgota@auburn.edu> Signed-off-by:
-
Bruno Christo authored
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by:
Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by:
-
Erik S. Beiser authored
cx88: Add IR support to pcHDTV HD3000 & HD5500 Signed-off-by:
Erik S. Beiser <erikb@bu.edu> Signed-off-by:
-
Pascal Terjan authored
Signed-off-by:
Arnaud Patard <apatard@mandriva.com> Signed-off-by:
Pascal Terjan <pterjan@mandriva.com> Cc: Patrick Boettcher <patrick.boettcher@desy.de> [mchehab@redhat.com: Fixed a small merge conflict] Signed-off-by:
-
sebastian.blanes@gmail.com authored
This patch introduces support for DVB-T for the following dibcom based card: Sony PlayTV (USB-ID: 1415:0003) Signed-off-by:
Sebastián Blanes <sebastian.blanes@gmail.com> Cc: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by:
-
Matthias Schwarzott authored
Add DVB support for Avermedia DVB-S Pro and Avermedia DVB-S Hybrid+FM card both labled A700. They use zl10313 demod (driver mt312) and zl10036 tuner. [mchehab@redhat.com: change __FUNCTION__ into __func__] Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Matthias Schwarzott authored
This driver is based on initial work by Tino Reichardt and was heavily changed. The datasheet of the zl10036 can be found here and on other places on the net: http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf The zl10038 is similar to the zl10036, so it is maybe possible to write a common driver of necessary. Signed-off-by:
-
Trent Piepho authored
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from querycap, enum_input, enum_fmt_vid_cap, and g_fmt_vid_cap. Signed-off-by:
-
Trent Piepho authored
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from g_audio, enum_input, g_parm and gmbuf. Signed-off-by:
-
Trent Piepho authored
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from g_audio, queryctrl, and enum_fmt_vid_cap. Signed-off-by:
-
Trent Piepho authored
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from enum_fmt_vid_cap, g_fmt_vid_cap, and g_parm. Signed-off-by:
-
Trent Piepho authored
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from enum_input and g_tuner. Signed-off-by:
-
Trent Piepho authored
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from enum_input and g_tuner. Signed-off-by:
-
Trent Piepho authored
vidioc_enum_fmt_vid_overlay() did nothing but call vidioc_enum_fmt_vid_cap(), so just make saa7146_video_ioctl_ops.vidioc_enum_fmt_vid_overlay point to vidioc_enum_fmt_vid_cap() and get ride of vidioc_enum_fmt_vid_overlay(). Have gparm use v4l2_video_std_frame_period to fill in the frame period instead of just assuming PAL. Signed-off-by:
-
Trent Piepho authored
Some code was calling v4l2_video_std_construct() when all it cared about was the frame period. So make a function that just returns that and have v4l2_video_std_construct() use it. At this point there are no users of v4l2_video_std_construct() left outside of v4l2-ioctl, so it could be un-exported and made static. Change v4l2_video_std_construct() so that it doesn't zero out the struct v4l2_standard passed in. It's already been zeroed out in the common ioctl code. Signed-off-by:
-
Trent Piepho authored
If an ioctl is read-only then the driver fills in all the fields. Lots of times drivers only care about some fields so it's best if video_ioctl2 takes care of zeroing out the entire structure before handing it to the driver. This saves code in each driver to do it and driver authors often forget. The existing memset code in some of the read-only ioctl handlers can be deleted. Convert a case statement to a single if statement. Deleted a debug line from ENUMAUDOUT that was copy-and-pasted to G_AUDOUT by mistake. Signed-off-by:
-
