- 02 Dec, 2009 2 commits
-
-
Florian Fainelli authored
This patch fixes the compilation failure of rc32434 due to a bad module parameter description. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
H Hartley Sweeten authored
The size value passed to ioremap_nocache() is not correct. Use resource_size() to get the correct value. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
- 01 Dec, 2009 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: update TODO files Staging: hv: Fix some missing author names Staging: hv: Fix vmbus event handler bug Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver USB: work around for EHCI with quirky periodic schedules USB: musb: Fix CPPI IRQs not being signaled USB: musb: respect usb_request->zero in control requests USB: musb: fix ISOC Tx programming for CPPI DMAs USB: musb: Remove unwanted message in boot log usb: amd5536udc: fixed shared interrupt bug and warning oops USB: ftdi_sio: Keep going when write errors are encountered. USB: musb_gadget: fix STALL handling USB: EHCI: don't send Clear-TT-Buffer following a STALL
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/of_serial: add missing ns16550a id bcm63xx_uart: Fix serial driver compile breakage. tty_port: handle the nonblocking open of a dead port corner case
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Loongson: Switch from flatmem to sparsemem MIPS: Loongson: Disallow 4kB pages MIPS: Add missing definition for MADV_HWPOISON. MIPS: Fix build error if __xchg() is not getting inlined. MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.
-
Wu Zhangjin authored
With flatmem hibernation for Loongson will fail, and there are also some other problems such as broken files when using NFS or CIFS / Samba. The config help of sparsemem says: "This option provides some potential performance benefits, along with decreased code complexity." So to avoid the potential problems of FLATMEM, we disable FLATMEM directly and use SPARSEMEM instead. Related email thread: http://groups.google.com/group/loongson-dev/browse_thread/thread/b6b65890ec2b0f24/feb43e5aa7f55d9b?show_docid=feb43e5aa7f55d9bReported-by: Tatu Kilappa <tatu.kilappa@gmail.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/737/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
Currently, with PAGE_SIZE_4KB, the kernel for loongson will hang on: Kernel panic - not syncing: Attempted to kill init! The possible reason is the cache aliases problem: Loongson 2F has 64kb, 4 way L1 Cache, the way size is 16kb, which is bigger then 4kb. so, If using 4kb page size, there is cache aliases problem. To avoid this kind of problem, extra cache flushing. The 2nd possible solution is 16kb page size which avoids cache aliases without the need for extra cache flushes. So we disable 4kB pages until the aliasing issue is solved. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/736/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Thanks to Joseph S. Myers for reporting this. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Joseph S. Myers" <joseph@codesourcery.com> Patchwork: http://patchwork.linux-mips.org/patch/723/
-
Ralf Baechle authored
If __xchg() is not getting inlined the outline version of the function will have a reference to __xchg_called_with_bad_pointer() which does not exist remaining. Fixed by using BUILD_BUG_ON() to check for allowable operand sizes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/705/
-
Martin Michlmayr authored
Some Debian users have reported that the kernel hangs early during boot on some IP22 systems. Thomas Bogendoerfer found that this is due to a "bad interaction between CONFIG_EARLY_PRINTK and overwritten prom memory during early boot". Since there's no fix yet, disable CONFIG_EARLY_PRINTK for now. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Cc: linux-mips@linux-mips.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/702/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Howells authored
Move slow_work's debugging proc file to debugfs. Signed-off-by: David Howells <dhowells@redhat.com> Requested-and-acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Fixup last users of irq_chip->typename Alpha: Rearrange thread info flags fixing two regressions arch/alpha/kernel: Add kmalloc NULL tests arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSEST
-
Marc Dionne authored
When IMA is active, using dentry_open without updating the IMA counters will result in free/open imbalance errors when fput is eventually called. Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Commits 3d7a641e ("SLOW_WORK: Wait for outstanding work items belonging to a module to clear") introduced some code to make sure that all of a module's slow-work items were complete before that module was removed, and commit 3bde31a4 ("SLOW_WORK: Allow a requeueable work item to sleep till the thread is needed") further extended that, breaking it in the process if CONFIG_MODULES=n: CC kernel/slow-work.o kernel/slow-work.c: In function 'slow_work_execute': kernel/slow-work.c:313: error: 'slow_work_thread_processing' undeclared (first use in this function) kernel/slow-work.c:313: error: (Each undeclared identifier is reported only once kernel/slow-work.c:313: error: for each function it appears in.) kernel/slow-work.c: In function 'slow_work_wait_for_items': kernel/slow-work.c:950: error: 'slow_work_unreg_sync_lock' undeclared (first use in this function) kernel/slow-work.c:951: error: 'slow_work_unreg_wq' undeclared (first use in this function) kernel/slow-work.c:961: error: 'slow_work_unreg_work_item' undeclared (first use in this function) kernel/slow-work.c:974: error: 'slow_work_unreg_module' undeclared (first use in this function) kernel/slow-work.c:977: error: 'slow_work_thread_processing' undeclared (first use in this function) make[1]: *** [kernel/slow-work.o] Error 1 Fix this by: (1) Extracting the bits of slow_work_execute() that are contingent on CONFIG_MODULES, and the bits that should be, into inline functions and placing them into the #ifdef'd section that defines the relevant variables and adding stubs for moduleless kernels. This allows the removal of some #ifdefs. (2) #ifdef'ing out the contents of slow_work_wait_for_items() in moduleless kernels. The four functions related to handling module unloading synchronisation (and their associated variables) could be offloaded into a separate .c file, but each function is only used once and three of them are tiny, so doing so would prevent them from being inlined. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
While building 2.6.32-rc8-git2 for Fedora I noticed the following thinko in commit 201a1542 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions"): fs/9p/cache.c: In function '__v9fs_fscache_release_page': fs/9p/cache.c:346: error: 'vnode' undeclared (first use in this function) fs/9p/cache.c:346: error: (Each undeclared identifier is reported only once fs/9p/cache.c:346: error: for each function it appears in.) make[2]: *** [fs/9p/cache.o] Error 1 Fix the 9P filesystem to correctly construct the argument to fscache_maybe_release_page(). Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Xiaotian Feng <dfeng@redhat.com> [from identical patch] Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [from identical patch] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Michael Cree authored
The removal of the TIF_NOTIFY_RESUME flag, commit a583f1b5 "remove unused TIF_NOTIFY_RESUME flag," resulted in incorrect setting of the unaligned access control flags by the prctl syscall. The re-addition of the TIF_NOTIFY_RESUME flag, commit d0420c83 "KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]" further caused problems, namely incorrect operands to assembler code as evidenced by: AS arch/alpha/kernel/entry.o arch/alpha/kernel/entry.S: Assembler messages: arch/alpha/kernel/entry.S:326: Warning: operand out of range (0x0000000000000406 is not between 0x0000000000000000 and 0x00000000000000ff) Both regressions fixed by (1) rearranging TIF_NOTIFY_RESUME flag to be in lower 8 bits of the thread info flags, and (2) making sure that ALPHA_UAC_SHIFT matches the rearrangement of the thread info flags. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: David Howells <dhowells@redhat.com>, Signed-off-by: Matt Turner <mattst88@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6Linus Torvalds authored
* 'security' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: mac80211: fix spurious delBA handling mac80211: fix two remote exploits
-
Gernot Hillier authored
This patch adds the vendor and device id for the Mobilcom Debitel UMTS surf stick (a.k.a. 4G Systems XSStick W14, MobiData MBD-200HU, ...). To see these ids, you need to switch the stick to modem operation first with the help of usb_modeswitch. This makes it switch from 1c9e:f000 to 1c9e:9603 and thus be recognized by the option driver. Signed-off-by: Gernot Hillier <gernot@hillier.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
a quirky chipset needs periodic schedules to run for a minimum time before they can be disabled again. This enforces the requirement with a time stamp and a calculated delay Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel Glöckner authored
On tx channel abort a cppi interrupt is generated for a short time by setting the lowest bit of the TCPPICOMPPTR register. It is then reset immediately by clearing the bit. When the interrupt handler is run, it does not detect an interrupt in the TCPPIMSKSR or RCPPIMSKSR registers and thus exits early without writing the TCPPIEOIR register. It appears that this inhibits further cppi interrupts until the handler is called by chance, f.ex. from davinci_interrupt(). By moving the unmasking of the interrupt below the writes to TCPPICOMPPTR, no interrupt is generated and no write to TCPPIEOIR is necessary. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel Glöckner authored
In gadget mode the answer to a control request should be followed by a zero-length packet if the amount transferred is an exact multiple of the endpoint's packet size and the requests has its "zero" flag set. This patch prevents the request from being immediately removed from the queue when a control IN transfer ends on a full packet and "zero" is set. The next time ep0_txstate is entered, a zero-length packet is queued and the request is removed as fifo_count is 0. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ajay Kumar Gupta authored
Isochronous Tx DMA is getting programmed but never getting started for CPPI and TUSB DMAs and thus Isochronous Tx doesn't work. Fixing it by starting DMAs using musb_h_tx_dma_start(). Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Babu Ravi <ravibabu@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ajay Kumar Gupta authored
Removes below unnecessary log of almost 28 lines during boot. musb_hdrc: hw_ep 0shared, max 64 musb_hdrc: hw_ep 1tx, max 512 musb_hdrc: hw_ep 1rx, max 512 ... ... musb_hdrc: hw_ep 13shared, max 4096 musb_hdrc: hw_ep 14shared, max 1024 musb_hdrc: hw_ep 15shared, max 1024 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Thomas Dahlmann authored
- fixed shared interrupt bug reported by Vadim Lobanov - fixed possible warning oops on driver unload when connected - prevent interrupt flood in PIO mode ("modprobe amd5536udc use_dma=0") when using gadget ether Signed-off-by: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: Robert Richter <robert.richter@amd.com> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Eric W. Biederman authored
The use of urb->actual_length to update tx_outstanding_bytes implicitly assumes that the number of bytes actually written is the same as the number of bytes we tried to write. On error that assumption is violated so just use transfer_buffer_length the number of bytes we intended to write to the device. If an error occurs we need to fall through and call usb_serial_port_softint to wake up processes waiting in tty_wait_until_sent. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sergei Shtylyov authored
The driver incorrectly cancels the mass-storage device CSW request (which leads to device reset) due to giving back URB at the head of endpoint's queue after sending each STALL handshake; stop doing that and start checking for the queue being non-empty before stalling an endpoint and disallowing stall in such case in musb_gadget_set_halt() like the other gadget drivers do. Moreover, the driver starts Rx request despite of the endpoint being halted -- fix this by moving the SendStall bit check from musb_g_rx() to rxstate(). And we also sometimes get into rxstate() with DMA still active after clearing an endpoint's halt (not clear why), so bail out in this case, similarly to what txstate() does... While at it, also do the following changes : - in musb_gadget_set_halt(), remove pointless Tx FIFO flushing (the driver does not allow stalling with non-empty Tx FIFO anyway); - in rxstate(), stop pointlessly zeroing the 'csr' variable; - in musb_gadget_set_halt(), move the 'done' label to a more proper place; - in musb_g_rx(), eliminate the 'done' label completely... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1304) fixes a regression in ehci-hcd. Evidently some hubs don't handle Clear-TT-Buffer requests correctly, so we should avoid sending them when they don't appear to be absolutely necessary. The reported symptom is that output on a downstream audio device cuts out because the hub stops relaying isochronous packets. The patch prevents Clear-TT-Buffer requests from being sent following a STALL handshake. In theory a STALL indicates either that the downstream device sent a STALL or that no matching TT buffer could be found. In either case, the transfer is completed and the TT buffer does not remain busy, so it doesn't need to be cleared. Also, the patch fixes a minor flaw in the code that actually sends the Clear-TT-Buffer requests. Although the pipe direction isn't really used for control transfers, it should be a Send rather than a Receive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Javier Kohen <jkohen@users.sourceforge.net> CC: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Bartlomiej Zolnierkiewicz authored
Remove my mail address. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Haiyang Zhang authored
Fix some missing author names. They were accidentally removed by someone within Microsoft before the files were sent for inclusion in the kernel. Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Haiyang Zhang authored
The flag ENABLE_POLLING is always enabled in original Makefile, but accidently removed during porting to mainline kernel. The patch fixes this bug which can cause stalled network communication. Credit needs to go to Eric Sesterhenn <eric.sesterhenn@lsexperts.de> For pointing out a typo in the original code as well. Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dave Jones authored
Nearly every invocation of memset in drivers/staging/hv/StorVsc.c has its arguments the wrong way around. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Michal Simek authored
Many boards have a bug-free ns16550 compatible serial port, which we should register as PORT_16550A. This introduces a new value "ns16550a" for the compatible property of of_serial to let a firmware choose that model instead of using the crippled PORT_16550 mode. Reported-by: Alon Ziv <alonz@nolaviz.org> Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Maxime Bizon authored
The driver missed a small API change while sitting in Ralf's tree, this patch makes it compile again. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Some drivers allow O_NDELAY of a dead port (eg for setserial to work). In that situation we must not try to raise the carrier. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 30 Nov, 2009 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] fix crash when disconnecting usb storage [SCSI] fix async scan add/remove race resulting in an oops [SCSI] sd: Return correct error code for DIF
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: gcm - fix another complete call in complete fuction crypto: padlock-aes - Use the correct mask when checking whether copying is required
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfinLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: fix SMP build error in start_thread() Blackfin: fix memset in smp_send_reschedule() and -stop() Blackfin: fix typo in ptrace poking Blackfin: check for anomaly 05000475 Blackfin: work around testset anomaly 05000477 Blackfin: update anomaly lists Blackfin: fix cache Kconfig typo Blackfin: fix suspend/resume failure with some on-chip ROMs
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix sparse warning [CIFS] Duplicate data on appending to some Samba servers [CIFS] fix oops in cifs_lookup during net boot
-