Fix GPMC_CS_CONFIG1 writing and typos
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Fixes compilation errors on OMAP1.
Signed-off-by: Timo Teras <timo.teras@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

- replace custom debugging stuff with the default kernel one
- pass a pointer to the LCD object instance to member functions
- rename lcd_lph8923 to the more generic lcd_mipid
- use SPI_MODE_1 instead of SPI_MODE_0 in lcd_mipid
- add ESD spike recovery support to lcd_mipid
Signed-off-by: Imre Deak <ext-imre.deak@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

- Support for
        - overlays through separate /dev/fbX nodes
        - scaling and color space conversion
        - per-plane memory configuration either in SRAM or SDRAM

- Replace custom debug stuff with the default kernel one
Signed-off-by: Imre Deak <ext-imre.deak@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

- OMAP ATAG changes:
        FBMEM - support for per plane memory configurations
        LCD   -  add data_lines, reset GPIO line params

- FB memory configuration:
        Support for per-plane memory configurations with FB location
        either in SRAM or SDRAM.

- DMA consistent memory size:
        Make the ARM DMA consistent memory size overridable. The default
        is 2MB, but for larger frame buffers we may need more. Kconfig
        option is added in the next patch.
Signed-off-by: Imre Deak <ext-imre.deak@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Multiplexing for 24xx GPMC wait pin monitoring
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Kevin Hilman <khilman@deeprooted.net>

Signed-off-by: Kevin Hilman <khilman@deeprooted.net>

MT_MEMORY is needed in order to execute code in SRAM. Also
need to use section mapping.

Based on a patch by Richard Woodruff.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use gpmc_cs_get_base_addr for H4 smc91x
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use gpmc_cs_get_base_addr for H4 smc91x
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On OMAP2420, when running MPU at high frequencies, dmtimers need to
have a longer delay for the new functional clock to be active.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Sprinkle dev_dbg's wrapped with VERBOSE to several functions to aid
debugging.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

- Initialize timer outside of spinlock to reduce the time the spinlock is held
- Do clk_get to the source clocks during initialization to avoid sleeping later
- New function to set counter register
Signed-off-by: Timo Teras <timo.teras@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Since the mutex protecting the clock list is static, the list
itself should be too.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Also removed unused ochi_omap_host_enable() function.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

It is now possible to dynamically set VMEM, VIO, VDCDC2 and VDCDC3.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Being named "Crazed Snow-Weasel" instills a lot of confidence in this
release, so I'm sure this will be one of the better ones.

Reflect the fact that the Cell Broadband Engine supports 64k
pages by adding the bit to the CPU features.
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The page size encoding passed to tlbie is incorrect for new-style
large pages.  This fixes it.  This doesn't affect anything on older
machines because mmu_psize_defs[psize].penc (the page size encoding)
is 0 for 4k and 16M pages (the two are distinguished by a separate "is
a large page" bit).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arm_timer() checks PF_EXITING to prevent BUG_ON(->exit_state)
in run_posix_cpu_timers().

However, for some reason it does so only for CPUCLOCK_PERTHREAD
case (which is imho wrong).

Also, this check is not reliable, PF_EXITING could be set on
another cpu without any locks/barriers just after the check,
so it can't prevent from attaching the timer to the exiting
task.

The previous patch makes this check unneeded.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

do_exit() clears ->it_##clock##_expires, but nothing prevents
another cpu to attach the timer to exiting process after that.
arm_timer() tries to protect against this race, but the check
is racy.

After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and
before do_exit() calls 'schedule() local timer interrupt can find
tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu
does sys_wait4) interrupted task has ->signal == NULL.

At this moment exiting task has no pending cpu timers, they were
cleanuped in __exit_signal()->posix_cpu_timers_exit{,_group}(),
so we can just return from irq.

John Stultz recently confirmed this bug, see

	http://marc.theaimsgroup.com/?l=linux-kernel&m=115015841413687Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If the local timer interrupt happens just after do_exit() sets PF_EXITING
(and before it clears ->it_xxx_expires) run_posix_cpu_timers() will call
check_process_timers() with tasklist_lock + ->siglock held and

	check_process_timers:

		t = tsk;
		do {
			....

			do {
				t = next_thread(t);
			} while (unlikely(t->flags & PF_EXITING));
		} while (t != tsk);

the outer loop will never stop.

Actually, the window is bigger.  Another process can attach the timer
after ->it_xxx_expires was cleared (see the next commit) and the 'if
(PF_EXITING)' check in arm_timer() is racy (see the one after that).
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A couple of fixes that should prevent crashes when using netconsole and
suspend/resume. First, netconsole poll routine shouldn't run unless the
device is up; second, the NAPI poll should be disabled during suspend.

This is only an issue on sky2, because it has to have one NAPI poll
routine for both ports on dual port boards. Normal drivers use
netif_rx_schedule_prep and that checks for netif_running.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If get_user_pages() returns less pages than what we asked for, we jump
to out_unmap which will return ERR_PTR(ret).  But ret can contain a
positive number just smaller than local_nr_pages, so be sure to set it
to -EFAULT always.

Problem found and diagnosed by Damien Le Moal <damien@sdl.hitachi.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Some time ago the cdrom open routine was changed so that we call the
driver's open routine before checking to see if it is read only.  However,
if we discovered that a read write open was not possible and the open
flags required a writable open, we just returned -EROFS without calling
the driver's release routine.   This seems to work for most cdrom drivers,
but breaks the Powerpc iSeries virtual cdrom rather badly.

This just inserts the release call in the error path to balance the call
to "->open()" done by "open_for_data()".
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Mux updates for external DMA and GPIO. GPIO updates
by Igor Stoppa.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix CONFIG_PRINTK_TIME hangs on systems where sched_clock() does
not work before timer is initialized.

For example, on OMAP, symptoms of this problem include system
only booting with low level debug enabled when using 32KHz timer.
Signed-off-by: Tony Lindgren <tony@atomide.com>

- Move register definitions away from the header file
- Change OMAP_MMC_{READ,WRITE} macros to use the host pointer
- Replace base with virt_base and phys_base
- Implement OMAP2420 initialization workaround
- General code cleanups
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Enable / disable the mcspi_ick and mcspi_fck clocks in omap2_mcspi_probe
and omap2_mcspi_remove respectively.

Drop the ref count on the class device in omap2_mcspi_remove.

Change the clock names for mcspi_ick[123] and mcspi_fck[123] to mcspi_ick
and mcspi_fck, use instead the clk.id field for the bus id.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

We don't clear the seek stat values in cfq_alloc_io_context(), and if
->seek_mean is unlucky enough to be set to -36 by chance, the first
invocation of cfq_update_io_seektime() will oops with a divide by zero
in do_div().

Just memset the entire cic instead of filling invididual values
independently.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If flock_lock_file() failed to allocate flock with locks_alloc_lock()
then "error = 0" is returned. Need to return some non-zero.
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>