- 30 Mar, 2009 40 commits
-
-
Devin Heitmueller authored
Add the analog parameters to the device profile for the HVR-850 Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Devin Heitmueller authored
There is an issue related to the i2c clock for addressing the xc5000. The au0828 chip does not support clock stretching, which the xc5000 makes use of. This results in cases where we silently get back garbage in i2c read operations. To work around this issue until we slow down the i2c clock when talking with that specific device. This was not an issue before we had analog support because we never needed to enumerate the i2c bus, and digital tuning never actually needed to perform read operations against the xc5000. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
Add support for the analog functionality found in the au0828 bridge Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
Add support for the analog functionality in the au8522 analog/digital demodulator Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
Make use of the hybrid tuner framework so the analog and digital parts of the au8522 demodulator can make use of the same shared state. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
When the au8522 is idle, put the chip into a low power mode (reduces power consumption from 450ma to 346ma) Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
For the i2c messages to read and write registers, the two high order bits of the first byte dictates whether it is a read or a write operation. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
Move the au8522 state structure, as well as exposing functions needed by the analog side of the demodulator into a common header file. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
Rename the au8522.c file to au8522_dig.c so that more source files can be added to the driver while preserving the original name of au8522.ko Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Devin Heitmueller authored
The xc5000 driver has a bug where the IF is always set to whatever the first caller to dvb_attach() provides. This fails when the device requires an IF other than 5380 and the analog driver is loaded first through tuner-core (which always supplies the hard-coded value of 5380). Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by:
-
Abylay Ospan authored
It appears TS discontinuity about one per 10 hrs if CAM used. Patch to fix it. Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Abylay Ospan authored
CI high address lines disappears due to wrong data type used. Patch to fix it. Signed-off-by:
-
Igor M. Liplianin authored
Signed-off-by:
Igor M. Liplianin <liplianin@netup.ru> Signed-off-by:
-
Igor M. Liplianin authored
Signed-off-by:
-
Hans Verkuil authored
The v4l2_dev field of video_device wasn't initialized. The parent field is derived from v4l2_dev, so that doesn't need to be set anymore. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Call v4l2_device_disconnect when the parent of a hotpluggable device disconnects. This ensures that you do not have a pointer to a device that is no longer present. Signed-off-by:
-
Andy Walls authored
This addition to the v4l2-api add definitions for the constants and data structures used for sliced VBI data insertion into MPEG streams triggered by V4L2_MPEG_STREAM_VBI_FMT_IVTV. This simply declares what the ivtv and cx18 drivers and MythTV have already been doing and provides a proper data structure definition to user space. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Jean-Francois Moine authored
The JPEG quality of the images (quantization tables) is now settable by the VIDIOC_S_JPEGCOMP ioctl. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Philippe Rétornaz authored
- The video device is not allocated when mt9t031_init() is called, don't use it in debug printk. - The clock polarity is inverted in mt9t031_set_bus_param(), use the correct one. Signed-off-by:
Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Sascha Hauer authored
This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by:
-
Sascha Hauer authored
This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by:
-
Sascha Hauer authored
Some Phytec cameras have a I2C GPIO expander which allows it to switch between different sensor bus widths. This was previously handled in the camera driver. Since handling of this switch varies on several boards the cameras are used on, the board support seems a better place to handle the switch Signed-off-by:
-
Sascha Hauer authored
Camera sensors have a native bus width say support, but on some boards not all sensor data lines are connected to the image interface and thus support a different bus width than the sensors native one. Some boards even have a bus driver which dynamically switches between different bus widths with a GPIO. This patch adds a hook which board code can use to support different bus widths. Signed-off-by:
-
Magnus Damm authored
Make sure videobuf_waiton() is used before freeing a buffer. Without this fix we may return the buffer to the allocator before the bus mastering operation is finished. Reported-by:
Matthieu CASTET <matthieu.castet@parrot.com> Tested-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Currently soc-camera doesn't set up any image format without an explicit S_FMT. According to the API this should be supported, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch moves negotiating of available host-camera format translations to probe() time, and restores the state from the last close() on the next open(). This is needed for some drivers, which power down or reset hardware after the last user closes the interface. This patch also has a nice side-effect of avoiding multiple allocation anf freeing of format translation tables. Signed-off-by:
-
Guennadi Liakhovetski authored
For the case, that we have to capture with a default format, i.e., when the user doesn't call S_FMT, we have to use the field value according to the default, configured at open() time. Signed-off-by:
-
Guennadi Liakhovetski authored
Currently soc-camera doesn't set up any image format without an explicit S_FMT. It seems this should be supported, since, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch configures a default image format on open(). Signed-off-by:
-
Guennadi Liakhovetski authored
As host and camera drivers become more complex, differences between S_FMT and S_CROP functionality grow, this patch separates them. Signed-off-by:
-
Hans Verkuil authored
Bt819 needs the parent driver to drive a GPIO pin low and high in order to reset its fifo. Use the new notify callback for this. Signed-off-by:
-
Hans Verkuil authored
Add a notify callback to v4l2_device to let sub-devices notify their parent of special events. Signed-off-by:
-
Hans Verkuil authored
Normally the parent device of v4l2_device is used as the video device node's parent. But if it was not set, then use the parent field in the video_device struct. This is needed in the cx88 driver, which has one core v4l2_device but creates multiple pci devices (one each for raw and mpeg video). So you cannot associate the core v4l2_device with a particular PCI device, but you can do that for each video_device. Signed-off-by:
-
