1.  Add race condition check after netif_stop_queue().  tg3_tx() runs
    without netif_tx_lock and can race with tg3_start_xmit_dma_bug() ->
    tg3_tso_bug().

2.  Firmware TSO in 5703/5704/5705 also have the same TSO limitation,
    i.e. they cannot handle TSO headers bigger than 80 bytes.  Rename
    TG3_FL2_HW_TSO_1_BUG to TG3_FL2_TSO_BUG and set this flag on
    these chips as well.

3.  Update version to 3.74.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packet_lookup_frame() always returns tpacket_hdr*, so there's no reason
to return char* and require casting by callers.

Also, remove a cast of void*.
Signed-off-by: Jason Lunz <lunz@falooley.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch for adjust inet6_exit() to inverse sequence to inet6_init().

At ipv6_init, it first create proc_root/net/dev_snmp6 entry by call
ipv6_misc_proc_init(), then call addrconf_init() to create the corresponding
device entry at this directory, but at inet6_exit, ipv6_misc_proc_exit()
called first, then call addrconf_init().
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed to set fl_tunnel.fl6_src correctly in xfrm6_bundle_create().
Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Acked-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds proper prototypes for some functions in
include/net/irda/irda.h
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some Bluetooth drivers need one or more binary firmware images. Export
these image names via the MODULE_FIRMWARE tag.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

In the case of bound RFCOMM TTY devices the parent is not available
before its usage. So when opening a RFCOMM TTY device, move it to
the corresponding ACL device as a child. When closing the device,
move it back to the virtual device tree.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The open and close callbacks for the HID device are not optional, but
for the Bluetooth HID report mode support it is enough to add empty
dummy callbacks.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch extends the current Bluetooth HID support to use the new
HID subsystem and adds full report mode support.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The compat ioctl patch copied the parser version field into the
report descriptor size field by mistake.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

move_native_irqs tries to do the right thing when migrating irqs
by disabling them.  However disabling them is a software logical
thing, not a hardware thing.  This has always been a little flaky
and after Ingo's latest round of changes it is guaranteed to not
mask the apic.

So this patch fixes move_native_irq to directly call the mask and
unmask chip methods to guarantee that we mask the irq when we
are migrating it.  We must do this as it is required by
all code that call into the path.

Since we don't know the masked status when IRQ_DISABLED is
set so we will not be able to restore it.   The patch makes the code
just give up and trying again the next time this routing is called.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The problem:  After moving an interrupt when is it safe to teardown
the data structures for receiving the interrupt at the old location?

With a normal pci device it is possible to issue a read to a device
to flush all posted writes.  This does not work for the oldest ioapics
because they are on a 3-wire apic bus which is a completely different
data path.  For some more modern ioapics when everything is using
front side bus delivery you can flush interrupts by simply issuing a
read to the ioapic.  For other modern ioapics emperical testing has
shown that this does not work.

So it appears the only reliable way to know the last of the irqs from an
ioapic have been received from before the ioapic was reprogrammed is to
received the first irq from the ioapic from after it was reprogrammed.

Once we know the last irq message has been received from an ioapic
into a local apic we then need to know that irq message has been
processed through the local apics.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For the ISA irqs we reserve 16 vectors.  This patch adds constants for
those vectors and modifies the code to use them.  Making the code a
little clearer and making it possible to move these vectors in the future.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The code in io_apic.c and in i8259.c currently hardcode the same
vector for the timer interrupt so there is no reason for a special
assignment for the timer as the setup for the i8259 already takes care
of this.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently assign_irq_vector works mostly by side effect and returns
the results of it's changes to the caller.  Which makes for a lot of
arguments to pass/return and confusion as to what to do if you need
the status but you aren't calling assign_irq_vector.

This patch stops returning values from assign_irq_vector that can be
retrieved just as easily by examining irq_cfg, and modifies the
callers to retrive those values from irq_cfg when they need them.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the io_apic.c has several parallel arrays for different
kinds of data that can be know about an irq.  The parallel arrays
make the code harder to maintain and make it difficult to remove
the static limits on the number of the number of irqs.

This patch pushes irq_data and irq_vector into a irq_cfg array and
updates the code to use it.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NR_IRQ_VECTORS is currently a compatiblity define set to NR_IRQs.
This patch updates the users of NR_IRQ_VECTORS to use NR_IRQs instead
so that NR_IRQ_VECTORS can be removed.

There is still shared code with arch/i386 that uses NR_IRQ_VECTORS
so we can't remove the #define just yet :(
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If we have an irq that comes from multiple io_apic pins the FINAL action
(which is io_apic_sync or nothing) needs to be called for every entry or
else if the two pins come from different io_apics we may not wait until
after the action happens on the io_apic.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For some reason the code has been picking TARGET_CPUS when asked to
set the affinity to an empty set of cpus.  That is just silly it's
extra work.  Instead if there are no cpus to set the affinity to we
should just give up immediately.  That is simpler and a little more
intuitive.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently we have two routines that do practically the same thing
setup_IO_APIC_irq and io_apic_set_pci_routing.  This patch makes
setup_IO_APIC_irq the common factor of these two previous routines.
For setup_IO_APIC_irq all that was needed was to pass the trigger
and polarity to make the code a proper subset of io_apic_set_pci_routing.

Hopefully consolidating these two routines will improve maintenance
there were several differences that simply appear to be one routine
or the other getting it wrong.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's dead Jim.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch replaces all instances of "set_native_irq_info(irq, mask)"
with "irq_desc[irq].affinity = mask".  The latter form is clearer
uses fewer abstractions, and makes access to this field uniform
accross different architectures.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

By precomputing old_mask I remove an extra if statement, remove an
indentation level and make the code slightly easier to read.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 2ff2d3d7.

Uwe Bugla reports that he cannot mount a floppy drive any more, and Jiri
Slaby bisected it down to this commit.

Benjamin LaHaise also points out that this is a big hot-path, and that
interrupt delivery while idle is very common and should not go through
all these expensive gyrations.

Fix up conflicts in arch/i386/kernel/apic.c and arch/i386/kernel/irq.c
due to other unrelated irq changes.

Cc: Stephane Eranian <eranian@hpl.hp.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Uwe Bugla <uwe.bugla@gmx.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] One line missing from previous commit
  [CIFS] mtime bounces from local to remote when cifs nocmtime i_flags overwritten
  [CIFS] fix &&/& typo in cifs_setattr()

This reverts commit d2ed1635.

As Thomas Gleixner reports:
  "e1000 is not working anymore. ifup fails permanentely.
    ADDRCONF(NETDEV_UP): eth0: link is not ready
   nothing else"

The broken commit was identified with "git bisect".

Auke Kok says:
  "I think we need to drop this now.  The report that says that this
   *fixes* something might have been on regular interrupts only.  I
   currently suspect that it breaks all MSI interrupts, which would make
   sense if I look a the code.  Very bad indeed."

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Not only was the function way too big to be inlined in the first place,
it was used before it was even defined.
Noted-by: Faik Uygur <faik@pardus.org.tr>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (196 commits)
  V4L/DVB (5253): Qt1010: whitespace / 80 column cleanups
  V4L/DVB (5252): Qt1010: use ARRAY_SIZE macro when appropriate
  V4L/DVB (5251): Qt1010: fix compiler warning
  V4L/DVB (5249): Fix compiler warning in vivi.c
  V4L/DVB (5247): Stv0297: Enable BER/UNC counting
  V4L/DVB (5246): Budget-ci: IR handling fixups
  V4L/DVB (5245): Dvb-ttpci: use i2c gate ctrl from stv0297 frontend driver
  V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations struct
  V4L/DVB (5178): Avoid race when deregistering the IR control for dvb-usb
  V4L/DVB (5240): Qt1010: use i2c_gate_ctrl where appropriate
  V4L/DVB (5239): Whitespace / 80-column cleanups
  V4L/DVB (5238): Kconfig: qt1010 should be selected by gl861 and au6610
  V4L/DVB (5237): Dvb: add new qt1010 tuner module
  V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-T
  V4L/DVB (5235): Gl861: use parallel_ts
  V4L/DVB (5234): Gl861: remove unneeded declaration
  V4L/DVB (5233): Gl861: correct address of the bulk endpoint
  V4L/DVB (5232): Gl861: correct oops when loading module
  V4L/DVB (5231): Gl861: whitespace cleanups
  V4L/DVB (5230): Gl861: remove NULL entry from gl861_properties
  ...

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Use ARRAY_SIZE macro already defined in kernel.h
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

In function 'qt1010_init':
Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The result of copy_to_user was not used, so the compiler complained
now a warning will be issued if copy_to_user fails.
Signed-off-by: Marcel Siegert <mws@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Enable BER/UNC counting for the stv0297 frontend.
The idea for this patch comes from stv0297_cs.c.
Signed-off-by: Hartmut Birr <e9hack@googlemail.com>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Commit 00c4cc67 Oliver Endriss changed 
the budget-ci driver to use interrupt mode for i2c transfers.

This also meant that a new bunch of IR bytes that were previously lost 
are now received, which allowed me to better understand how the MSP430 
chip works. Unfortunately it also means that the current driver gets 
some assumptions wrong and might generate double keypresses for one IR 
command. 

The attached patch fixes this by throwing away the repeat bytes and by 
associating the correct command and device bytes.
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Use i2c gate ctrl from stv0297 frontend driver.
Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Arjan van de Ven <arjan@infradead.org> reported an illegal re-usage of 
the fileoperations struct if more than one dvb device (e.g. frontend) is 
present. 

This patch fixes this issue.  

It allocates a new fileoperations struct each time a device is 
registered and copies the default template fileops.
Signed-off-by: Marcel Siegert <mws@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The work item function is dvb_usb_read_remote_control():
        INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d);
and the last piece of work it does is:
        schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval));
Hence you need to call "cancel_rearming_delayed_work()" and not
"cancel_delayed_work()", correct?  I certainly haven't seen this oops
reoccur since I applied this patch.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This patch adds calls to i2c_gate_ctrl in the qt1010 dvb tuner module,
while removing the temporary hack in au6610 and gl861.
Tested successfully against fi-Oulu frequencies with
MSI Megasky 580 GL861 and Sigmatek DVB-110 AU6610.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>