- 23 Mar, 2006 31 commits
-
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek This patch changes iop3xx and omap2 and to use PLAT8250_DEV_PLATFORM{,1} as platform device id instead of just hardcoding 0/1 directly. Signed-off-by:Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (78 commits) [PATCH] powerpc: Add FSL SEC node to documentation [PATCH] macintosh: tidy-up driver_register() return values [PATCH] powerpc: tidy-up of_register_driver()/driver_register() return values [PATCH] powerpc: via-pmu warning fix [PATCH] macintosh: cleanup the use of i2c headers [PATCH] powerpc: dont allow old RTC to be selected [PATCH] powerpc: make powerbook_sleep_grackle static [PATCH] powerpc: Fix warning in add_memory [PATCH] powerpc: update mailing list addresses [PATCH] powerpc: Remove calculation of io hole [PATCH] powerpc: iseries: Add bootargs to /chosen [PATCH] powerpc: iseries: Add /system-id, /model and /compatible [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII [PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.c [PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt) [PATCH] powerpc: iseries: mf related cleanups [PATCH] powerpc: Replace platform_is_lpar() with a firmware feature [PATCH] powerpc: trivial: Cleanup whitespace in cputable.h [PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early() [PATCH] powerpc: Unconfuse htab_bolt_mapping() callers ...
-
Kim Phillips authored
Documentation: Added FSL SOC SEC node definition Updated the documentation to include the definition of the SEC device node format for Freescale SOC devices. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Bjorn Helgaas authored
Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. All callers of macio_register_driver() either ignore the return value or return it as the return value of a module_init() function. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Bjorn Helgaas authored
Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. Nobody uses the return value of of_register_driver() anyway. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Andrew Morton authored
drivers/macintosh/via-pmu.c:164: warning: `sleep_in_progress' defined but not used Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jean Delvare authored
Cleanup the use of i2c headers in macintosh drivers. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Anton Blanchard authored
Now powerpc uses the generic RTC stuff we should not enable the old RTC. Doing so will result in hangs at boot. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Olaf Hering authored
powerbook_sleep_grackle is only called inside via-pmu, from pmu_ioctl() Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Andrew Morton authored
arch/powerpc/mm/mem.c: In function `add_memory': arch/powerpc/mm/mem.c:128: warning: assignment makes integer from pointer without a cast Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Use of uninitialized variable in drivers/net/depca.c [PATCH] Use after free in net/tulip/de2104x.c [PATCH] sis900 adm7001 PHY support [PATCH] sky2: more ethtool stats [PATCH] s390: qeth :allow setting of attribute "route6" to "no_router". [PATCH] s390: qeth driver cleanups [PATCH] s390: qeth driver statistics fixes [PATCH] AMD Au1xx0: fix Ethernet TX stats [PATCH] fix spidernet build issue
-
Linus Torvalds authored
If the debug driver is built-in, link it in last, so that any real drivers will probe first, rather than having the debug driver pick the first scsi slots.. Signed-off-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: Do not use inet->id of global tcp_socket when sending RST. [NETFILTER]: Fix undefined references to get_h225_addr [NETFILTER]: futher {ip,ip6,arp}_tables unification [NETFILTER]: Fix xt_policy address matching [NETFILTER]: nf_conntrack: support for layer 3 protocol load on demand [NETFILTER]: x_tables: set the protocol family in x_tables targets/matches [NETFILTER]: conntrack: cleanup the conntrack ID initialization [NETFILTER]: nfnetlink_queue: fix nfnetlink message size [NETFILTER]: ctnetlink: Fix expectaction mask dumping [NETFILTER]: Fix Kconfig typos [NETFILTER]: Fix ip6tables breakage from {get,set}sockopt compat layer -
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Merge avlab serial board entries in parport_serial [SERIAL] kernel console should send CRLF not LFCR
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 3389/1: typo and grammar fix [ARM] 3386/1: AT91RM9200 Clock update [ARM] 3384/1: AT91RM9200: Timer [ARM] 3382/1: ixp2000: unify defconfigs [ARM] 3381/1: ixp2000: fix slowport write timing control register fields [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check [ARM] 3379/1: ixp2000: use generic 8250 debug macros [ARM] 3378/1: ixp2000: fix gpio interrupt handling [ARM] Quieten spurious IRQ detection [ARM] Use kcalloc to allocate counter_config array rather than kmalloc [ARM] Oprofile: dynamically allocate counter_config [ARM] Oprofile: Convert semaphore to mutex [ARM] 3376/2: S3C2410 - update defconfig [ARM] 3375/1: S3C2440 - fix osiris machine build [ARM] 3374/1: ep93xx: gpio interrupt support [ARM] 3361/1: S3C24XX - add USB bus clock source [ARM] 3360/1: S3C2440 - add set rate methods and camera clock [ARM] 3359/1: S3C24XX - add support for clk_set_rate [ARM] Convert kmalloc+memset to kzalloc [ARM] 3373/1: move uengine loader to arch/arm/common ...
-
Eric Sesterhenn authored
hi, this fixes coverity bug #888, where the variable dev is used uninitialized. I assume the programmer meant to use mdev, which is initialized. Compile tested only. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Eric Sesterhenn authored
hi, this fixes coverity bug #912, where skb is freed first, and dereferenced a few lines later with skb->len. Signed-off-by:
-
Artur Skawina authored
this patch is required to get a SIS964 based motherboard ethernet working (FSC D1875) (picking the #1 transceiver, instead of the last one, in case no known ones were found might be a better default, and would have worked in this case too) Signed-off-by:
Artur Skawina <art_k@o2.pl> Signed-off-by:
-
Stephen Hemminger authored
Expose all the available hardware statistics via ethtool. And cleanup some of the statistics definitions. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Frank Pavlic authored
[patch 4/6] s390: qeth :allow setting of attribute "route6" to "no_router". From: Ursula Braun <braunu@de.ibm.com> when setting route6 attribute back to no_router qeth does not issue an IP ASSIST command to reset router value to no_router. Once primary_router is set device stays in this mode. Issue an IP ASSIST command when no_router is set in route6. Device will be reset and thus will not longer run as a primary router. Signed-off-by:
Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 5 ----- 1 files changed, 5 deletions(-) Signed-off-by:
-
Frank Pavlic authored
[patch 3/6] s390: qeth driver cleanups From: Ursula Braun <braunu@de.ibm.com> - code analyzing tool BEAM has found some unreachable and unnecessary statements and also conditions which are always true. - removed some useless MII code since OSA card will never allow to set such values. Signed-off-by:
-
Frank Pavlic authored
[patch 2/6] s390: qeth driver statistics fixes From: Ursula Braun <braunu@de.ibm.com> - display "unsigned int" values in /proc/qeth_perf with %u instead of %i - omit qdio header length when increasing card->stats.tx_bytes Signed-off-by:
-
Sergei Shtylylov authored
With Au1xx0 Ethernet driver, TX bytes/packets always remain zero. The problem seems to be that when packet has been transmitted, the length word in DMA buffer is zero. The patch updates the TX stats when a buffer is fed to DMA. The initial 2.4 patch was posted to linux-mips@linux-mips.org by Thomas Lange 21 Jan 2005. Signed-off-by:
Thomas Lange <thomas@corelatus.se> Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Jens Osterkamp authored
<unchangelogged> Signed-off-by:
Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by:
-
Tejun Heo authored
Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
-
Tejun Heo authored
As libata now can do PIO, don't ignore PIO-only devices. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
Not much to say here except that some drives have fixed and bad firmware Signed-off-by:
-
Alan Cox authored
The current code follows the spec but uses an overlong delay. This would be great if the hardware did. Several vendors however forget the D7 pulldown. Fortunately 0xFF isnt a sane reset state so we can use it to skip detection as is done in drivers/ide. (ie this is a tested solution over a long time) Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Jeff Garzik authored
-
- 22 Mar, 2006 9 commits
-
-
Alexey Kuznetsov authored
The problem is in ip_push_pending_frames(), which uses: if (!df) { __ip_select_ident(iph, &rt->u.dst, 0); } else { iph->id = htons(inet->id++); } instead of ip_select_ident(). Right now I think the code is a nonsense. Most likely, I copied it from old ip_build_xmit(), where it was really special, we had to decide whether to generate unique ID when generating the first (well, the last) fragment. In ip_push_pending_frames() it does not make sense, it should use plain ip_select_ident() instead. Signed-off-by:Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
get_h225_addr is exported, but declared static, which fails when linking statically. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Dmitry Mishin authored
This patch moves {ip,ip6,arp}t_entry_{match,target} definitions to x_tables.h. This move simplifies code and future compatibility fixes. Signed-off-by:Dmitry Mishin <dim@openvz.org> Acked-off-by:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
Patrick McHardy authored
Fix missing inversion in address matching, it was broken during the conversion to x_tables. Signed-off-by:
-
Pablo Neira Ayuso authored
x_tables matches and targets that require nf_conntrack_ipv[4|6] to work don't have enough information to load on demand these modules. This patch introduces the following changes to solve this issue: o nf_ct_l3proto_try_module_get: try to load the layer 3 connection tracker module and increases the refcount. o nf_ct_l3proto_module put: drop the refcount of the module. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
Set the family field in xt_[matches|targets] registered. Signed-off-by:
-
Pablo Neira Ayuso authored
Currently the first conntrack ID assigned is 2, use 1 instead. Signed-off-by:
-
Pablo Neira Ayuso authored
Fix oversized message, use NLMSG_SPACE just one since it reserves space for the netlink header and NFA_SPACE for every attribute. Thanks to Harald Welte for the feedback Signed-off-by:
-
Pablo Neira Ayuso authored
The expectation mask has some particularities that requires a different handling. The protocol number fields can be set to non-valid protocols, ie. l3num is set to 0xFFFF. Since that protocol does not exist, the mask tuple will not be dumped. Moreover, this results in a kernel panic when nf_conntrack accesses the array of protocol handlers, that is PF_MAX (0x1F) long. This patch introduces the function ctnetlink_exp_dump_mask, that correctly dumps the expectation mask. Such function uses the l3num value from the expectation tuple that is a valid layer 3 protocol number. The value of the l3num mask isn't dumped since it is meaningless from the userspace side. Thanks to Yasuyuki Kozakai and Patrick McHardy for the feedback. Signed-off-by:
-
