- 23 Mar, 2006 40 commits
-
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Robert Love <rml@novell.com> Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Jes Sorensen authored
Convert from semaphore to mutex. Untested as I have no access to a floppy drive at the moment. Signed-off-by:
Jes Sorensen <jes@sgi.com> Signed-off-by:
-
Jes Sorensen authored
Convert to use mutex from a semaphore Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Jes Sorensen authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Ingo Molnar authored
Convert fs/9p/mux.c from semaphore to mutex. NOTE: fixed locking bugs in the process - the code was using semaphores the other way around. Signed-off-by:
-
Ingo Molnar authored
Convert kernel/rcupdate's rcu_barrier_sema to mutex. Signed-off-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Ingo Molnar authored
convert cpuset.c's callback_sem and manage_sem to mutexes. Build and boot tested by Ingo. Build, boot, unit and stress tested by pj. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Jan Kara authored
When quota is being turned off we assumed that all the references to dquots were already dropped. That need not be true as inodes being deleted are not on superblock's inodes list and hence we need not reach it when removing quota references from inodes. So invalidate_dquots() has to wait for all the users of dquots (as quota is already marked as turned off, no new references can be acquired and so this is bound to happen rather early). When we do this, we can also remove the iprune_sem locking as it was protecting us against exactly the same problem when freeing inodes icache memory. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Kyle McMartin authored
Seems like needless clutter having a bunch of #if defined(CONFIG_$ARCH) in include/linux/cache.h. Move the per architecture section definition to asm/cache.h, and keep the if-not-defined dummy case in linux/cache.h to catch architectures which don't implement the section. Verified that symbols still go in .data.read_mostly on parisc, and the compile doesn't break. Signed-off-by:
Kyle McMartin <kyle@parisc-linux.org> Signed-off-by:
-
Christoph Hellwig authored
Since early 2.4.x all cdrom drivers implement the block_device methods themselves, so they can handle additional ioctls directly instead of going through the cdrom layer. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Christoph Hellwig authored
Add a small helper for each ioctl to cut down cdrom_ioctl to a readable size. Signed-off-by:
Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by:
-
Ravikiran G Thirumalai authored
Avoid taking the global tasklist_lock when possible, if a process is single threaded during getrusage(). Any avoidance of tasklist_lock is good for NUMA boxes (and possibly for large SMPs). Thanks to Oleg Nesterov for review and suggestions. Signed-off-by:
Nippun Goel <nippung@calsoftinc.com> Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
-
Eric Dumazet authored
1) Reduce the size of (struct fdtable) to exactly 64 bytes on 32bits platforms, lowering kmalloc() allocated space by 50%. 2) Reduce the size of (files_struct), using a special 32 bits (or 64bits) embedded_fd_set, instead of a 1024 bits fd_set for the close_on_exec_init and open_fds_init fields. This save some ram (248 bytes per task) as most tasks dont open more than 32 files. D-Cache footprint for such tasks is also reduced to the minimum. 3) Reduce size of allocated fdset. Currently two full pages are allocated, that is 32768 bits on x86 for example, and way too much. The minimum is now L1_CACHE_BYTES. UP and SMP should benefit from this patch, because most tasks will touch only one cache line when open()/close() stdin/stdout/stderr (0/1/2), (next_fd, close_on_exec_init, open_fds_init, fd_array[0 .. 2] being in the same cache line) Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Andrew Morton authored
Linus points out that ext3_readdir's readahead only cuts in when ext3_readdir() is operating at the very start of the directory. So for large directories we end up performing no readahead at all and we suck. So take it all out and use the core VM's page_cache_readahead(). This means that ext3 directory reads will use all of readahead's dynamic sizing goop. Note that we're using the directory's filp->f_ra to hold the readahead state, but readahead is actually being performed against the underlying blockdev's address_space. Fortunately the readahead code is all set up to handle this. Tested with printk. It works. I was struggling to find a real workload which actually cared. (The patch also exports page_cache_readahead() to GPL modules) Cc: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by:
-
Jean Delvare authored
Use the standard BCD macros instead of redefining them. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Luca Tettamanti authored
Add the SNAPSHOT_S2RAM ioctl to the snapshot device. This ioctl allows a userland application to make the system (previously frozen with the SNAPSHOT_FREE ioctl) enter the S3 state without freezing processes and disabling nonboot CPUs for the second time. This will allow us to implement the suspend-to-disk-and-RAM (STDR) functionality in the userland suspend tools. Signed-off-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Rafael J. Wysocki authored
Remove the console-switching code from the suspend part of the swsusp userland interface and let the userland tools switch the console. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Rafael J. Wysocki authored
It is unsafe to suspend devices if the hardware is controlled by X. Add an extra check to prevent this from happening. Signed-off-by:
-
Shaohua Li authored
Highmem could be in pcp list as well. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Rafael J. Wysocki authored
This patch from Pavel moves userland freeze signals handling into more logical place. It now hits even with mysqld running. Signed-off-by:
-
