entried to /proc/kcore in addtion to direct-linear-map, vmalloc area. 
This patch unifies KCORE_TEXT entry scattered under x86 and ia64.

I'm not familiar with other archs (mips has its own even after this patch)
but range of [_stext ..._end) is a valid area of text and it's not in
direct-map area, defining CONFIG_ARCH_PROC_KCORE_TEXT is only a necessary
thing to do.

Note: I left mips as it is now.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

registers same range of [VMALLOC_START...VMALLOC_END) This patch unifies
them.  By this.  archs which have no kclist_add() hooks can see vmalloc
area correctly.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Considering to make kclist dynamically reconfigulable, it's necessary to
know which kclists are for System RAM and which are not.

This patch add kclist types as
  KCORE_RAM
  KCORE_VMALLOC
  KCORE_TEXT
  KCORE_OTHER

This "type" is used in a patch following this for detecting KCORE_RAM.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

 - many per-arch hooks are removed.

 - /proc/kcore will know really valid physical memory area.

 - /proc/kcore will be aware of memory hotplug.

 - /proc/kcore will be architecture independent i.e.
   if an arch supports CONFIG_MMU, it can use /proc/kcore.
   (if the arch uses usual memory layout.)

This patch:

/proc/kcore uses its own list handling codes. It's better to use
generic list codes.

No changes in logic. just clean up.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

 - fix compatibility with tools/perf/builtin-record.c in upstream kernel

The patch is against 2.6.30 and is tested on intel and ppc architectures.

ChangeLog:
 20. Jan 2009 V0.1
  - First Version for Kernel 2.6.28.1
 31. Mar 2009 V0.2
  - Ported to Kernel 2.6.29
 03. Jun 2009 V0.3
  - Ported to Kernel 2.6.30
  - Redesigned what was suggested by Ingo Molnar
  - the thread watch monitor is gone
  - the /proc/stackmon entry is also gone
  - slim down
 04. Jun 2009 V0.4
  - Redesigned everything that was suggested by Andrew Morton
  - slim down
 04. Jun 2009 V0.5
  - Code cleanup
 06. Jun 2009 V0.6
  - Fix missing mm->mmap_sem locking in function task_show_stack_usage()
  - Code cleanup
 10. Jun 2009 V0.7
  - update Documentation/filesystem/proc.txt
 10. Jun 2009 V0.8
  - change maps/smaps output, displays now the max. stack size
 24. Jun 2009 V0.9
  - use walk_page_range() to determinate the stack usage high water mark
  - include swapped pages to the stack usage high water mark count
 24. Jun 2009 V0.10
  - fix off by one bug
  - cleanup

 fs/exec.c                          |    2
 include/linux/sched.h              |    1
 kernel/fork.c                      |    2
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

especially for embedded linux.

Currently you are only able to dump the main process/thread stack usage
which is showed in /proc/pid/status by the "VmStk" Value.  But you get no
information about the consumed stack memory of the the threads.

There is an enhancement in the /proc/<pid>/{task/*,}/*maps and which marks
the vm mapping where the thread stack pointer reside with "[thread stack
xxxxxxxx]".  xxxxxxxx is the maximum size of stack.  This is a value
information, because libpthread doesn't set the start of the stack to the
top of the mapped area, depending of the pthread usage.

A sample output of /proc/<pid>/task/<tid>/maps looks like:

08048000-08049000 r-xp 00000000 03:00 8312       /opt/z
08049000-0804a000 rw-p 00001000 03:00 8312       /opt/z
0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
a7d12000-a7d13000 ---p 00000000 00:00 0
a7d13000-a7f13000 rw-p 00000000 00:00 0          [thread stack: 001ff4b4]
a7f13000-a7f14000 ---p 00000000 00:00 0
a7f14000-a7f36000 rw-p 00000000 00:00 0
a7f36000-a8069000 r-xp 00000000 03:00 4222       /lib/libc.so.6
a8069000-a806b000 r--p 00133000 03:00 4222       /lib/libc.so.6
a806b000-a806c000 rw-p 00135000 03:00 4222       /lib/libc.so.6
a806c000-a806f000 rw-p 00000000 00:00 0
a806f000-a8083000 r-xp 00000000 03:00 14462      /lib/libpthread.so.0
a8083000-a8084000 r--p 00013000 03:00 14462      /lib/libpthread.so.0
a8084000-a8085000 rw-p 00014000 03:00 14462      /lib/libpthread.so.0
a8085000-a8088000 rw-p 00000000 00:00 0
a8088000-a80a4000 r-xp 00000000 03:00 8317       /lib/ld-linux.so.2
a80a4000-a80a5000 r--p 0001b000 03:00 8317       /lib/ld-linux.so.2
a80a5000-a80a6000 rw-p 0001c000 03:00 8317       /lib/ld-linux.so.2
afaf5000-afb0a000 rw-p 00000000 00:00 0          [stack]
ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]


Also there is a new entry "stack usage" in /proc/<pid>/{task/*,}/status
which will you give the current stack usage in kb.

A sample output of /proc/self/status looks like:

Name:	cat
State:	R (running)
Tgid:	507
Pid:	507
.
.
.
CapBnd:	fffffffffffffeff
voluntary_ctxt_switches:	0
nonvoluntary_ctxt_switches:	0
Stack usage:	12 kB

I also fixed stack base address in /proc/<pid>/{task/*,}/stat to the base
address of the associated thread stack and not the one of the main
process.  This makes more sense.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

-EIO error to make the error message clear to user.  Add whitespace
stripping.  No functionality changes.

The old code:

echo  1  > /proc/pid/make-it-fail (ok)
echo 1foo > /proc/pid/make-it-fail (-bash: echo: write error: Input/output error)

The new code:

echo  1  > /proc/pid/make-it-fail (ok)
echo 1foo > /proc/pid/make-it-fail (-bash: echo: write error: Invalid argument)

This patch is conservative in changes to not breaking existing
scripts/applications.
Signed-off-by: Vincent Li <macli@brc.ubc.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zero-length input at the end of the function, David Rientjes suggested to
use strict_strtol to replace simple_strtol, this patch cover above
suggestions, add removing of leading and trailing whitespace from user
input.  It does not change function behavious.
Signed-off-by: Vincent Li <macli@brc.ubc.ca>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Amerigo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fixed the wrong size of /proc/kcore problem.

But its size still looks insane, since it never equals the size of
physical memory.
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tao Ma <tao.ma@oracle.com>
Cc: <mtk.manpages@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

much: ps and friends mostly use /proc/tid/task/pid.

Remove "if (thread_group_leader())" checks from proc_flush_task() path,
this means we always remove /proc/tid/task/pid dentry on exit, and this
actually matches the comment above proc_flush_task().

The test-case:

	static void* tfunc(void *arg)
	{
		char name[256];

		sprintf(name, "/proc/%d/task/%ld/status", getpid(), gettid());
		close(open(name, O_RDONLY));

		return NULL;
	}

	int main(void)
	{
		pthread_t t;

		for (;;) {
			if (!pthread_create(&t, NULL, &tfunc, NULL))
				pthread_join(t, NULL);
		}
	}

slabtop shows that pid/proc_inode_cache/etc grow quickly and
"indefinitely" until the task is killed or shrink_slab() is called, not
good.  And the main thread needs a lot of time to exit.

The same can happen if something like "ps -efL" runs continuously, while
some application spawns short-living threads.
Reported-by: "James M. Leddy" <jleddy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dominic Duval <dduval@redhat.com>
Cc: Frank Hirtz <fhirtz@redhat.com>
Cc: "Fuller, Johnray" <Johnray.Fuller@gs.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Paul Batkowski <pbatkowski@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

used in kernel/posix-cpu-timers.c:

        unsigned long psecs = cputime_to_secs(ptime);
        ...
        if (psecs >= sig->rlim[RLIMIT_CPU].rlim_max) {
                ...
                __group_send_sig_info(SIGKILL, SEND_SIG_PRIV, tsk);
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

if it was brought up from halt.  This patch uses the
dev_pm_ops.resume/restore methods to synchronize the hardware with the
memorized logical state, in effect bringing back the accelerometer and
backlight to the state prior to suspend.  Works for both suspend to ram
and hibernation.  The patch has zero effect on the running state.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

error.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

(for example if it's making unwanted electrical noise).  This patch
adds a sysfs node to put any adm1021 compatible device into low power mode.
Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sensor (sensitivity of 1/8 deg C).  This patch makes this higher
resolution available through the appropriate temperature sysfs nodes.

Curiously, this functionality was available in the 2.4 kernel driver (but
formatted in a less helpful manner).

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The suspend & resume function names are incorrect for the PM=n case.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lis3 devices.  The device's suspend mode is only entered in case no wakeup
threshold has been given.  In this case, the device is supposed to wake up
the system and must thus not be put to deep sleep.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

free-fall/wakeup functions of the lis302d chips.

More registers needed to be seperated as they are specific to the
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

function, I got that wrong during my last change.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I'm not sure if the readings are correct, however - on my 330, the driver
reports values between 27 and 41 °C (with core1 being about 8°C hotter
than core0, given the same load).  Maybe the maximum temperature of 100 °C
is wrong for Atom CPUs.

Michael "Tired" Riepe <michael.riepe@googlemail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

{2147, 483648000} on a 32 bit computer (or even for delays as small as
{429, 500000000} if the task is niced).

Because the result was already forced between 0 and 100ms, the effect of
the overflow was not too problematic, but the use of the hrtimer range
feature was not optimal in overflow cases.

This patch ensures that there can not be an integer overflow in this
function.
Signed-off-by: Guillaume Knispel <gknispel@proformatique.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

prevent miss categorising s2 as a type.  Fix up the spelling of the error
also.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

    #define pr_fmt(fmt)    "%s: " fmt, __func__

allow things with double quotes round them to avoid this check.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

  - More verbose help/usage message.
  - Make the option -f an alias for --file.
  - On -h, --help, and --version display help message and exit(0).
  - With no FILE(s) given, exit(1) with "no input files".
  - On invalid options display help/usage and exit(1).

Based on a patch by Pavel Machek.
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

trying to determine relative indent of conditionals and their blocks.
Reported-by: John Daiker <daikerjohn@gmail.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

the text after a C99 style comment the same way it does with block style
comments.  This prevents the text from getting processed as regular code.
Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

else.  This can trigger false modifier matching.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

tuples.  For example, Broadcom uses an Extended Function tuple to provide
the MAC address on some of their network cards, as in the case of the
Nintendo Wii WLAN daughter card.

This patch allows passing whitelisted FUNCE tuples unknown to the SDIO
core to a matching SDIO driver instead of rejecting them and failing.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

that the host executes either a power reset or issues a CMD52 (I/O Reset)
to re-initialize an I/O only card or the I/O portion of a combo card. 
Additionally, the CMD52 must be issued first because it cannot be issued
after a CMD0.

With this patch the Nintendo Wii SDIO-based WLAN card is detected after a
system reset, without requiring a complete system powercycle.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

error codes.  This was after a discussion with Pierre about using EINVAL
only for non-recoverable errors.  This patch was accepted as

http://git.kernel.org/linus/fdd858db7113ca64132de390188d7ca00701013d

Unfortunately, several weeks later, I realized that this patch has opened
a little can of worms because there are SD cards on the market which

a) claim that they support the switch command
AND
b) refuse to execute this command if operating in SPI mode.

So, such a card would get unusuable in an embedded linux system in SPI
mode, because the init sequence terminates with an error.

This patch adds the missing error codes to the caller of the switch
command and restores the old behaviour to fail gracefully if these
commands can not execute.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>		[2.6.31.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This patch doesn't include mmc-regulator support
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: <madhu.cr@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Z11, as discussed on linux-mmc here: http://marc.info/?t=125017355000008Signed-off-by: Chris Ball <cjb@laptop.org>
Tested-by: Norbert Preining <preining@logic.at>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

#111: FILE: arch/arm/mach-at91/at91sam9260_devices.c:326:
+				at91_set_gpio_input(data->slot[i].detect_pin, 1);

ERROR: space required before the open parenthesis '('
#117: FILE: arch/arm/mach-at91/at91sam9260_devices.c:332:
+			switch(i) {

WARNING: line over 80 characters
#144: FILE: arch/arm/mach-at91/at91sam9260_devices.c:359:
+					"AT91: SD/MMC slot %d not available\n", i);

WARNING: line over 80 characters
#224: FILE: arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c:56:
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS

WARNING: line over 80 characters
#229: FILE: arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c:61:
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);

WARNING: line over 80 characters
#310: FILE: arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c:142:
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)

WARNING: line over 80 characters
#344: FILE: arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c:176:
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,

WARNING: line over 80 characters
#470: FILE: arch/arm/mach-at91/include/mach/board.h:78:
+extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);

total: 1 errors, 7 warnings, 422 lines checked

./patches/at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver.patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Rob Emanuele <rob@emanuele.us>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

(board-sam9g20ek-2slot-mmc.c) and device support to make use of the
updated atmel-mci driver.

As the use of two slots modify GPIO pin allocation, we create another
board file.

This requires getting the most updated arch/arm/tools/mach-types from
http://www.arm.linux.org.uk/developer/machines/download.php to have the machine
type for the at91sam9g20ek-2slot-mmc board.

[nicolas.ferre@atmel.com: printk, slot_count modification in at91sam9260_devices.c file]
Signed-off-by: Rob Emanuele <rob@emanuele.us>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

interface.  The atmel-mci driver currently supports the AVR32 and this
patch adds AT91 support.

Add read/write proof selection switch dependent on chip availability of
this feature.

To use this new driver on a at91 the platform driver for your board needs
to be updated.

[nicolas.ferre@atmel.com indent, Kconfig comment and one printk modification]
Signed-off-by: Rob Emanuele <rob@emanuele.us>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>