- 07 Oct, 2008 13 commits
-
-
Denis V. Lunev authored
idev has been stored on seq->private. NULL has been stored for global statistics. The situation is changed with net namespace. We need to store pointer to struct net and the only place is seq->private. So, we'll have for /proc/net/dev_snmp6/* and for /proc/net/snmp6 pointers of two different types stored in the same field. This effectively requires to separate seq_ops of these files. Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
Simple, comsolidate sockstat6 staff in one place, at the beginning of the file. Right now sockstat6_seq_open/sockstat6_seq_fops looks like an intrusion in the middle of snmp6 code. Signed-off-by:
-
Denis V. Lunev authored
Do the same for /proc/net/snmp6. Signed-off-by:
-
Denis V. Lunev authored
Signed-off-by:
-
Ilpo Järvinen authored
I'm quite sure that if I give this function in its old format for you to inspect, you start to wonder what is the type of demanded or if it's a global variable. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
It all started from me noticing that this urgent check in tcp_clean_rtx_queue is unnecessarily inside the loop. Then I took a longer look to it and found out that the users of urg_mode can trivially do without, well almost, there was one gotcha. Bonus: those funny people who use urg with >= 2^31 write_seq - snd_una could now rejoice too (that's the only purpose for the between being there, otherwise a simple compare would have done the thing). Not that I assume that the rest of the tcp code happily lives with such mind-boggling numbers :-). Alas, it turned out to be impossible to set wmem to such numbers anyway, yes I really tried a big sendfile after setting some wmem but nothing happened :-). ...Tcp_wmem is int and so is sk_sndbuf... So I hacked a bit variable to long and found out that it seems to work... :-) Signed-off-by:
-
Peter Zijlstra authored
Add some packet-split receive hooks. For one this allows to do NUMA node affine page allocs. Later on these hooks will be extended to do emergency reserve allocations for fragments. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Peter Zijlstra authored
Wrap calling sk->sk_backlog_rcv() in a function. This will allow extending the generic sk_backlog_rcv behaviour. Signed-off-by:
-
Peter Zijlstra authored
This makes that ip6_route_net_init() does all of the route init code. There used to be a race between ip6_route_net_init() and ip6_net_init() and someone relying on the combined result was left out cold. Signed-off-by:
-
Peter Zijlstra authored
ip6_route_net_init() error handling looked less than solid, fix 'er up. Signed-off-by:
-
KOVACS Krisztian authored
Use the socket cached in the skb if it's present. Signed-off-by:
KOVACS Krisztian <hidden@sch.bme.hu> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
KOVACS Krisztian authored
To be able to use the cached socket reference in the skb during input processing we add a new set of lookup functions that receive the skb on their argument list. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To be able to use the cached socket reference in the skb during input processing we add a new set of lookup functions that receive the skb on their argument list. Signed-off-by:
-
- 06 Oct, 2008 3 commits
-
-
David S. Miller authored
Based upon a report by Vito Caputo. Signed-off-by: -
Jarek Poplawski authored
qdisc->requeue was planned to universally replace all requeuing code, but at the top level we never requeue more than one skb, so qdisc-> gso_skb is enough for this. qdisc->requeue would be used on the lower levels only for one level deep requeuing (like in sch_hfsc) after finishing all the changes. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Jarek Poplawski authored
Jay Cliburn noticed and diagnosed a bug triggered in dev_gso_skb_destructor() after last change from qdisc->gso_skb to qdisc->requeue list. Since gso_segmented skbs can't be queued to another list this patch brings back qdisc->gso_skb for them. Reported-by:
Jay Cliburn <jcliburn@gmail.com> Signed-off-by:
-
- 05 Oct, 2008 8 commits
-
-
Arnaud Ebalard authored
Provides implementation of the enhancements of XFRM/PF_KEY MIGRATE mechanism specified in draft-ebalard-mext-pfkey-enhanced-migrate-00. Defines associated PF_KEY SADB_X_EXT_KMADDRESS extension and XFRM/netlink XFRMA_KMADDRESS attribute. Signed-off-by:
Arnaud Ebalard <arno@natisbad.org> Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
-
Rémi Denis-Courmont authored
This protocol provides some connection handling and negotiated congestion control. Nokia cellular modems use it for bulk transfers. It provides packet boundaries (hence SOCK_SEQPACKET). Congestion control is per packet rather per byte, so we do not re-use the generic socket memory accounting. Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
-
Herbert Xu authored
Found during the (partial) unregister_netdevice audit that we didn't have to have :) It looks like a couple of Sun NIC drivers had unregister_netdevice when they really meant unregister_netdev. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 01 Oct, 2008 16 commits
-
-
Vlad Yasevich authored
The INIT perameter carries the adapatation value in network-byte order. We need to store it in host byte order as expected by data types and the user API. Signed-off-by:Vlad Yasevich <vladislav.yasevich@hp.com>
-
Vlad Yasevich authored
This patch enables cookie-echo retransmission transport switch feature. If COOKIE-ECHO retransmission happens, it will be sent to the address other than the one last sent to. Signed-off-by:
Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by:
-
Wei Yongjun authored
RFC3873 defined SCTP_MIB_OUTOFBLUES: sctpOutOfBlues OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out of the blue packets received by the host. An out of the blue packet is an SCTP packet correctly formed, including the proper checksum, but for which the receiver was unable to identify an appropriate association." REFERENCE "Section 8.4 in RFC2960 deals with the Out-Of-The-Blue (OOTB) packet definition and procedures." But OOTB packet INIT, INIT-ACK and SHUTDOWN-ACK(COOKIE-WAIT or COOKIE-ECHOED state) are not counted by SCTP_MIB_OUTOFBLUES. Case 1(INIT): Endpoint A Endpoint B (CLOSED) (CLOSED) INIT ----------> <---------- ABORT Case 2(INIT-ACK): Endpoint A Endpoint B (CLOSED) (CLOSED) INIT-ACK ----------> <---------- ABORT Case 3(SHUTDOWN-ACK): Endpoint A Endpoint B (CLOSED) (CLOSED) <---------- INIT SHUTDOWN-ACK ----------> <---------- SHUTDOWN-COMPLETE Case 4(SHUTDOWN-ACK): Endpoint A Endpoint B (CLOSED) (COOKIE-ECHOED) SHUTDOWN-ACK ----------> <---------- SHUTDOWN-COMPLETE This patch fixed the problem. Signed-off-by:Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
-
Wei Yongjun authored
RFC 4960: Section 9.2 The sender of the SHUTDOWN MAY also start an overall guard timer 'T5-shutdown-guard' to bound the overall time for the shutdown sequence. At the expiration of this timer, the sender SHOULD abort the association by sending an ABORT chunk. If the 'T5-shutdown- guard' timer is used, it SHOULD be set to the recommended value of 5 times 'RTO.Max'. The timer 'T5-shutdown-guard' is used to counter the overall time for shutdown sequence, and it's start by the sender of the SHUTDOWN. So timer 'T5-shutdown-guard' should be start when we send the first SHUTDOWN chunk and enter the SHUTDOWN-SENT state, not start when we receipt of the SHUTDOWN primitive and enter SHUTDOWN-PENDING state. If 'T5-shutdown-guard' timer is start at SHUTDOWN-PENDING state, the association may be ABORT while data is still transmitting. Signed-off-by:
-
Vlad Yasevich authored
sctp_is_any() function that is used to check for wildcard addresses only looks at the address itself to determine the address family. This function is used in the API to check the address passed in from the user. If the user simply zerroes out the sockaddr_storage and pass that in, we'll end up failing. So, let's try harder to determine the address family by also checking the socket if it's possible. Signed-off-by: -
Neil Horman authored
sctp_chunks should be put on a diet. This is some of the low hanging fruit that we can strip out. Changes all the __s8/__u8 flags to bitfields. Saves 12 bytes per chunk. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Vlad Yasevich authored
Chunks placed on the retransmit list are marked as inelegible for fast retrasnmission. Since missing indications determine when fast reransmission is done, there is not point in calling sctp_mark_missing() on the retransmit list since those chunks will not be marked. Signed-off-by: -
Vlad Yasevich authored
There is a possibility of walking the transport list twice during SACK processing when doing SFR-CACC algorithm. We can restructure the code to only do this once. Signed-off-by: -
Vlad Yasevich authored
Frist small step in optimizing SACK processing. Do not call sctp_mark_missing() when there are no gaps reported and thus not missing chunks. Signed-off-by: -
KOVACS Krisztian authored
The iptables tproxy code has to be able to do UDP socket hash lookups, so we have to provide an exported lookup function for this purpose. Signed-off-by:
-
KOVACS Krisztian authored
Current TCP code relies on the local port of the listening socket being the same as the destination address of the incoming connection. Port redirection used by many transparent proxying techniques obviously breaks this, so we have to store the original destination port address. This patch extends struct inet_request_sock and stores the incoming destination port value there. It also modifies the handshake code to use that value as the source port when sending reply packets. Signed-off-by:
-
KOVACS Krisztian authored
Netfilter's ip_route_me_harder() tries to re-route packets either generated or re-routed by Netfilter. This patch changes ip_route_me_harder() to handle packets from non-locally-bound sockets with IP_TRANSPARENT set as local and to set the appropriate flowi flags when re-doing the routing lookup. Signed-off-by:
-
KOVACS Krisztian authored
The TCP stack sends out SYN+ACK/ACK/RST reply packets in response to incoming packets. The non-local source address check on output bites us again, as replies for transparently redirected traffic won't have a chance to leave the node. This patch selectively sets the FLOWI_FLAG_ANYSRC flag when doing the route lookup for those replies. Transparent replies are enabled if the listening socket has the transparent socket flag set. Signed-off-by:
-
KOVACS Krisztian authored
Set FLOWI_FLAG_ANYSRC in flowi->flags if the socket has the transparent socket option set. This way we selectively enable certain connections with non-local source addresses to be routed. Signed-off-by:
-
KOVACS Krisztian authored
inet_iif() in inet_sock.h requires route.h. Since users of inet_iif() usually require other route.h functionality anyway this patch moves inet_iif() to route.h. Signed-off-by:
-
Tóth László Attila authored
Setting IP_TRANSPARENT is not really useful without allowing non-local binds for the socket. To make user-space code simpler we allow these binds even if IP_TRANSPARENT is set but IP_FREEBIND is not. Signed-off-by:
Tóth László Attila <panther@balabit.hu> Signed-off-by:
-
