- 01 Dec, 2006 40 commits
-
-
Burman Yan authored
Replace kmalloc+memset with kzalloc Signed-off-by:
Yan Burman <yan_952@hotmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Julien BLACHE authored
Use canonical defines for the Apple USB device IDs. Also add the Geyser IV devices missing in my previous patch. Signed-off-by:
Julien BLACHE <jb@jblache.org> Acked-by:
Dmitry Torokhov <dtor@insightbb.com> Signed-off-by:
-
Mariusz Kozlowski authored
Just digging through code and found these needless variable initializations. So here is the patch. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Adrian Bunk authored
usb_device_match() can now become static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
David Brownell authored
Remove minor double-declaration goof. Signed-off-by:
Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Make the pxa2xx_udc driver recognize a newer revision of the IXP425 chip. Signed-off-by:
-
Holger Schurig authored
Adds support for the DMC TSC-10 and TSC-25 usb touchscreen controllers. Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the needlessly global ftdi_release_platform_dev() static - remove the unused usb_ftdi_elan_read_reg() - proper prototypes for the following functions: - usb_ftdi_elan_read_pcimem() - usb_ftdi_elan_write_pcimem() Note that the misplaced prototypes for the latter ones in drivers/usb/host/u132-hcd.c were buggy. Depending on the calling convention of the architecture calling one of them could have turned your stack into garbage. Signed-off-by:
-
Adrian Bunk authored
This patch makes the needlessly global "u132_hcd_wait" static. Signed-off-by:
-
Mariusz Kozlowski authored
If at some point cypress_init() fails deregister only the resources that were registered until that point. Signed-off-by:
-
David Brownell authored
Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spam syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short circuited cables. Note that the bulk of these reports seem to be with VIA southbridges, but I think some were with Intel ones. Signed-off-by:
-
David Brownell authored
EHCI hooks for high speed electrical tests of the root hub ports. The expectation is that a usermode program actually triggers the test, making the same control request it would make for an external hub. Tests for peripheral upstream ports would issue a different request. In all cases, the hardware needs re-initialization before it could be used "normally" again (e.g. unplug/replug, rmmod/modprobe). Signed-off-by:
-
Alan Stern authored
The net2280 driver is too eager to send zero-length packets when IN tokens are received on ep0. No such packet should be sent (the driver should NAK) before the gadget driver has queued the proper response. Otherwise deferred responses are impossible. This patch (as823) makes net2280 avoid sending ZLPs for IN transfers on ep0 until a response has been submitted, and avoids stalling when an OUT packet is received before a request has been submitted for an OUT transfer on ep0. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Mariusz Kozlowski authored
Possible memleak fix on error path. The changes: - out_kfree2 and out_free_urb replaced - missing scsi_host_put() added Here it goes: Signed-off-by:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
-
Jaco Kroon authored
The mass storage device from Digitech designed for Flash Cards, as found on (for example) the GNX4 device has issues with residue, similar to the bug report at http://kerneltrap.org/node/6297. This patch adds the faulty storage device to unusual_devs.h, this not only reduces the noise in dmesg but also increases the transfer speeds by a factor of 7x for me (89kB/s -> 637kB/s). T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1210 ProdID=0003 Rev= 1.00 S: Manufacturer=DigiTech HMG S: Product=DigiTech Mass Storage C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by:
Jaco Kroon <jaco@kroon.co.za> Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Alan Stern authored
This patch (as821) fixes a compiler warning when CONFIG_PM isn't on ("usb_autosuspend_work" defined but not used). Signed-off-by: -
Naranjo Manuel Francisco authored
> 2006/11/11, Adrian Bunk <bunk@stusta.de>: > > The Coverity checker spotted the following in > > drivers/usb/serial/aircable.c: > > > > <-- snip --> > > > > ... > > static void aircable_read(void *params) > > { > > ... Hi everyone, Sorry for the long time response but here is the patch, I think this way should work, if anyone has any suggestion let me know. What I do now is, in case I don't have the tty available I reschedule the work, I have tried it and it works with no problem, I even tried removing the device, and didn't find anything strange. Signed-off-by:Naranjo Manuel <naranjo.manuel@gmail.com> Signed-off-by:
-
Alan Stern authored
All the other root-hub suspend or resume log messages, in ohci-hcd or any of the other host controller drivers, use the debug priority level. This patch (as815) makes the one single exception behave like all the rest. Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
Hello, - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
Hello, - usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
Mariusz Kozlowski authored
- usb_free_urb() cleanup Signed-off-by:
-
